?>

Washer / Flat Gasket STL 3D file ⌀ID: 250 mm ⌀OD: 280 mm thickness: 6 mm + chamfers 📦#1798

STL Download STL
Create a new model:
from scratch search for a model
3D model of flat gasket / washer in STL format. This model has an inner diameter of ⌀250 mm and an outer diameter of ⌀280 mm. The part thickness is 6 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 1 mm. These finishes are present on both sides.
Generation date: 2025-09-15
3D Model Washer / Flat Gasket STL 3D file ⌀ID: 250 mm ⌀OD: 280 mm thickness: 6 mm + chamfers

3D model download

Free
  • washer-flat-gasket-ring-inD250_model1798-nb0_dd{id}.stl : 197 Ko
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(no copyright - public domain)
Safe download

Values for this model

This model was generated by the Washer, Flat gasket, Ring template, with the following values:
Parameter Value
#1 inner diameter 250 mm
#2 outer diameter 280 mm
#3 thickness 6 mm
#4 finish chamfer
#5 finish position inner + outer
#6 sides two sides
#7 finish value 1 mm
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 inner diameter inD
#2 outer diameter ouD
#3 thickness thi
#4 finish edgF
#5 finish position edgP
#6 sides sidC
#7 finish value finV

Related 3D models

To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring 

Washer / Flat Gasket STL file ⌀ID: 147 mm ⌀OD: 150 mm thickness: 1.5 mm (📦 #2889)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 147 mm ⌀OD: 150 mm thickness: 1.5 mm
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀147 mm and an outer diameter of ⌀150 mm. The part thickness is 1.5 mm. There is no finish present.
Parameter Value Unit
inner diameter 147 mm
outer diameter 150 mm
thickness 1.5 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 140 mm ⌀OD: 143 mm thickness: 1.5 mm (📦 #2870)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 140 mm ⌀OD: 143 mm thickness: 1.5 mm
File of gasket / washer in STL file format. This part has an internal diameter of ⌀140 mm and an external diameter of ⌀143 mm. The thickness is 1.5 mm. There is no finish available.
Parameter Value Unit
inner diameter 140 mm
outer diameter 143 mm
thickness 1.5 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 90 mm ⌀OD: 150 mm thickness: 15 mm + chamfers (📦 #2356)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 90 mm ⌀OD: 150 mm thickness: 15 mm + chamfers
Download this 3D file of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀90 mm and an outer diameter of ⌀150 mm. The total thickness is 15 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 2 mm.
Parameter Value Unit
inner diameter 90 mm
outer diameter 150 mm
thickness 15 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 2 mm

Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer (📦 #1855)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 89 mm ⌀OD: 118 mm thickness: 3 mm + chamfer
3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀89 mm and an outer diameter of ⌀118 mm. The part thickness is 3 mm. A chamfer is present on the outer diameter with a value of 0.1 mm.
Parameter Value Unit
inner diameter 89 mm
outer diameter 118 mm
thickness 3 mm
finish chamfer
finish position outer
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL file ⌀ID: 110 mm ⌀OD: 120 mm thickness: 2 mm (📦 #2357)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 110 mm ⌀OD: 120 mm thickness: 2 mm
File of washer / gasket in STL 3D file format. This part features an internal diameter of ⌀110 mm and an external diameter of ⌀120 mm. The total thickness is 2 mm. No finish is applied.
Parameter Value Unit
inner diameter 110 mm
outer diameter 120 mm
thickness 2 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm (📦 #1715)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm
File of gasket / washer in STL file format. This part features an internal diameter of ⌀100 mm and an external diameter of ⌀112 mm. The part thickness is 16 mm. No finish is present.
Parameter Value Unit
inner diameter 100 mm
outer diameter 112 mm
thickness 16 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 90 mm ⌀OD: 120 mm thickness: 15 mm (📦 #2355)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 90 mm ⌀OD: 120 mm thickness: 15 mm
Download this 3D file of washer / gasket in STL 3D file format. This model has an internal diameter of ⌀90 mm and an external diameter of ⌀120 mm. The thickness is 15 mm. No finish is applied.
Parameter Value Unit
inner diameter 90 mm
outer diameter 120 mm
thickness 15 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm + fillet (📦 #3012)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 112 mm thickness: 16 mm + fillet
File of washer / gasket in STL file format. This part features an internal diameter of ⌀100 mm and an external diameter of ⌀112 mm. The part thickness is 16 mm. A fillet is applied on the internal diameter with a value of 0.1 mm.
Parameter Value Unit
inner diameter 100 mm
outer diameter 112 mm
thickness 16 mm
finish fillet
finish position inner
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #1718)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 70 mm ⌀OD: 86 mm thickness: 10 mm + chamfers
File of flat gasket / washer in STL file format. This model has an inner diameter of ⌀70 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
Parameter Value Unit
inner diameter 70 mm
outer diameter 86 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers (📦 #1817)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfers
3D model of gasket / washer in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The part thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 1 mm. These finishes are applied on both sides.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 1 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers (📦 #1712)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + chamfers
Download this 3D model of flat gasket / washer in STL format. This part features an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 4.9 mm

Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 120 mm thickness: 15 mm + chamfer (📦 #1716)

1 object(s) - format STL (5.0/5) 2 vote(s)
Washer / Flat Gasket STL file ⌀ID: 100 mm ⌀OD: 120 mm thickness: 15 mm + chamfer
3D model of gasket / washer in STL format. This model features an inner diameter of ⌀100 mm and an outer diameter of ⌀120 mm. The part thickness is 15 mm. A chamfer is applied on the inner diameter with a value of 9 mm.
Parameter Value Unit
inner diameter 100 mm
outer diameter 120 mm
thickness 15 mm
finish chamfer
finish position inner
sides one side
finish value 9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers (📦 #2284)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 86 mm thickness: 10 mm + chamfers
File of washer / flat gasket in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀86 mm. The total thickness is 10 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 3.9 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 86 mm
thickness 10 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.9 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets (📦 #1711)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 10 mm + fillets
3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The part thickness is 10 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 4.9 mm. These finishes are applied on the top and bottom.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 10 mm
finish fillet
finish position inner + oute...
sides two sides
finish value 4.9 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers
Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 74 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 3.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers (📦 #1820)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers
Model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀75 mm. The total thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 75 mm
thickness 5 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets (📦 #1710)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillets
Download this file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀60 mm and an external diameter of ⌀80 mm. The part thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position inner + oute...
sides one side
finish value 4 mm

Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet (📦 #1709)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 80 mm thickness: 8 mm + fillet
Model of flat gasket / washer in STL format. This part has an inner diameter of ⌀60 mm and an outer diameter of ⌀80 mm. The total thickness is 8 mm. A fillet is present on the outer diameter with a value of 2 mm.
Parameter Value Unit
inner diameter 60 mm
outer diameter 80 mm
thickness 8 mm
finish fillet
finish position outer
sides one side
finish value 2 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets (📦 #1818)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + fillets
Download this 3D file of washer / flat gasket in STL 3D file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 3.4 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 3.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer (📦 #1813)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 71 mm thickness: 5 mm + chamfer
Download this 3D file of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀57 mm and an external diameter of ⌀71 mm. The thickness is 5 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
Parameter Value Unit
inner diameter 57 mm
outer diameter 71 mm
thickness 5 mm
finish chamfer
finish position inner
sides one side
finish value 1 mm