?>

Round air vent STL 3D file ∅ 158 mm, slat angle: 33° with central reinforcement 📦#2554

STL Download STL
Create a new model:
from scratch search for a model
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 158 mm. The slats have an angle of 33° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the whole structure. This 3D vent cover has a prominent flange of 15 mm. The full diameter of the model is 188 mm.
Generation date: 2025-10-18
3D Model Round air vent STL 3D file ∅ 158 mm, slat angle: 33° with central reinforcement

3D model download

Free
  • round-air-vent-dia158mm-slD33d_model2554-nb0_dd{id}.stl : 6.1 Mo
STL Mesh quality : Linear deflection 0.1 Angular deflection 0.1
No compliance warranty No compliance warranty
(attribution - non commercial use - no derivatives)
Safe download

Values for this model

This model was generated by the Round air vent grill template, with the following values:
Parameter Value
#1 male diameter 158 mm
#2 slat angle 33 °
#3 slat thickness 1.6 mm
#4 flange width 15 mm
#5 central reinforcement yes
illustration of the parameters
Representation of the parameters

  • The total thickness of the vent is 25 mm.
  • Whatever the parameters, the slats never overlap. This ensures an optimal airflow. At the same time, the slats form an almost opaque screen along the axis.
  • The slats are actually shaped as parallelograms rather than rectangles. This ensures better printability.
  • The slats and the central reinforcement (if present) feature a 0.40 mm fillet on all edges. This improves airflow and prevents potential whistling.
  • The collar, if present, is 3 mm thick and has a 2 mm fillet for aesthetic purposes.
  • The male insertion area is 3 mm thick and has a 1 mm fillet on both edges to facilitate insertion into the intended slot.
  • The central reinforcement, if present, is 2 mm thick and spans the entire projected width of the slats.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 male diameter dia
#2 slat angle slD
#3 slat thickness slT
#4 flange width flW
#5 central reinforcement renf

Related 3D models

To search for a model based on your own parameters, go to the template page Round air vent grill 

Round air vent STL file ∅ 155 mm, slat angle: 45° with central reinforcement (📦 #1416)

1 object(s) - format STL
Round air vent STL file ∅ 155 mm, slat angle: 45° with central reinforcement
Model of a round vent cover for ventilation in STL format. Its male diameter measures 155 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 20 mm. The full diameter of this model is 195 mm.
Parameter Value Unit
male diameter 155 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 168 mm, slat angle: 45° with central reinforcement (📦 #1427)

1 object(s) - format STL
Round air vent STL 3D file ∅ 168 mm, slat angle: 45° with central reinforcement
3D model of a round grille for air circulation in STL format. Its male diameter measures 168 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement secures the slats. This 3D ventilation grille has a collar of 10 mm. The overall diameter of this model is 188 mm.
Parameter Value Unit
male diameter 168 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 168 mm, slat angle: 45° with central reinforcement (📦 #1428)

1 object(s) - format STL
Round air vent STL 3D file ∅ 168 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its insertion diameter measures 168 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A central reinforcement secures the slats. This ventilation grille has a flange of 10 mm. The full diameter of this model is 188 mm.
Parameter Value Unit
male diameter 168 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 127 mm, slat angle: 45° with central reinforcement (📦 #1415)

1 object(s) - format STL
Round air vent STL file ∅ 127 mm, slat angle: 45° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 127 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the slats. This ventilation grille has a prominent flange of 20 mm. The overall diameter of the model is 167 mm.
Parameter Value Unit
male diameter 127 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 180 mm, slat angle: 30° with central reinforcement (📦 #1388)

1 object(s) - format STL (4.0/5) 1 vote(s)
Round air vent STL file ∅ 180 mm, slat angle: 30° with central reinforcement
File of a round air vent for air circulation in STL format. Its male diameter measures 180 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A vertical reinforcement strengthens the slats. This ventilation grille has a prominent flange of 12 mm. The overall diameter of this model is 204 mm.
Parameter Value Unit
male diameter 180 mm
slat angle 30 °
slat thickness 2 mm
flange width 12 mm
central reinforcement yes

Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1773)

1 object(s) - format STL
Round air vent STL file ∅ 125 mm, slat angle: 45° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 125 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A central reinforcement reinforces the slats. This 3D vent grille has a prominent flange of 20 mm. The overall diameter of this model is 165 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #2492)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 40° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its insertion diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the slats. This 3D vent grille features a flange of 7 mm. The total diameter of the model is 164 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 7 mm
central reinforcement yes

Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement (📦 #1481)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter measures 152 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the whole structure. This 3D aeration grille features a collar of 10 mm. The overall diameter of the model is 172 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 88 mm, slat angle: 45° with central reinforcement (📦 #1829)

1 object(s) - format STL
Round air vent STL file ∅ 88 mm, slat angle: 45° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its male diameter measures 88 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This vent cover features a prominent flange of 15 mm. The full diameter of this model is 118 mm.
Parameter Value Unit
male diameter 88 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 105 mm, slat angle: 45° with central reinforcement (📦 #1491)

1 object(s) - format STL
Round air vent STL file ∅ 105 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter measures 105 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A vertical reinforcement secures the slats. This vent grille has a prominent flange of 20 mm. The overall diameter of this model is 145 mm.
Parameter Value Unit
male diameter 105 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 154 mm, slat angle: 45° with central reinforcement (📦 #1887)

1 object(s) - format STL
Round air vent STL 3D file ∅ 154 mm, slat angle: 45° with central reinforcement
Design of a round grille for ventilation in STL format. Its insertion diameter measures 154 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This ventilation grille features a flange of 10 mm. The overall diameter of this model is 174 mm.
Parameter Value Unit
male diameter 154 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 145 mm, slat angle: 45° with central reinforcement (📦 #2493)

1 object(s) - format STL
Round air vent STL file ∅ 145 mm, slat angle: 45° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 145 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 20 mm. The total diameter of this model is 185 mm.
Parameter Value Unit
male diameter 145 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement (📦 #1989)

1 object(s) - format STL
Round air vent STL file ∅ 125.2 mm, slat angle: 45° with central reinforcement
Model of a round air vent for air circulation in STL format. Its insertion diameter measures 125.2 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the slats. This vent cover has a prominent flange of 20 mm. The full diameter of the model is 165.2 mm.
Parameter Value Unit
male diameter 125.2 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1464)

1 object(s) - format STL
Round air vent STL 3D file ∅ 125 mm, slat angle: 45° with central reinforcement
Model of a round air vent for ventilation in STL format. Its insertion diameter measures 125 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the slats. This 3D vent grille has a collar of 10 mm. The full diameter of the model is 145 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 123 mm, slat angle: 45° with central reinforcement (📦 #1993)

1 object(s) - format STL
Round air vent STL file ∅ 123 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its male diameter is 123 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This aeration grille has a prominent flange of 20 mm. The total diameter of the model is 163 mm.
Parameter Value Unit
male diameter 123 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 115 mm, slat angle: 45° with central reinforcement (📦 #2398)

1 object(s) - format STL
Round air vent STL 3D file ∅ 115 mm, slat angle: 45° with central reinforcement
File of a round air vent for air circulation in STL format. Its insertion diameter measures 115 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This vent grille has a flange of 10 mm. The overall diameter of the model is 135 mm.
Parameter Value Unit
male diameter 115 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 98.5 mm, slat angle: 40° with central reinforcement (📦 #1956)

1 object(s) - format STL
Round air vent STL file ∅ 98.5 mm, slat angle: 40° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its insertion diameter measures 98.5 mm. The slats have an angle of 40° and a high thickness of 2 mm. A central reinforcement reinforces the whole structure. This 3D aeration grille features a flange of 10 mm. The full diameter of the model is 118.5 mm.
Parameter Value Unit
male diameter 98.5 mm
slat angle 40 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2140)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 92 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This 3D vent cover has a flange of 10 mm. The total diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 40° with central reinforcement (📦 #2307)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 40° with central reinforcement
Design of a round vent cover for air circulation in STL format. Its insertion diameter measures 92 mm. The slats have an angle of 40° and a high thickness of 2 mm. A central reinforcement secures the whole structure. This 3D ventilation grille has a collar of 10 mm. The full diameter of this model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 40 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 92 mm, slat angle: 25° with central reinforcement (📦 #2304)

1 object(s) - format STL
Round air vent STL 3D file ∅ 92 mm, slat angle: 25° with central reinforcement
Design of a round air vent for ventilation in STL format. Its male diameter is 92 mm. The slats have a slight angle of 25° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille has a flange of 10 mm. The full diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 25 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1739)

1 object(s) - format STL
Round air vent STL 3D file ∅ 71.2 mm, slat angle: 45° with central reinforcement
Model of a round grille for ventilation in STL format. Its male diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This aeration grille features a collar of 10 mm. The overall diameter of this model is 91.2 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 45° with central reinforcement (📦 #1955)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 45° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter measures 100 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the whole structure. This vent cover has a collar of 10 mm. The overall diameter of this model is 120 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 60 mm, slat angle: 45° with central reinforcement (📦 #1412)

1 object(s) - format STL (5.0/5) 2 vote(s)
Round air vent STL 3D file ∅ 60 mm, slat angle: 45° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter is 60 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement secures the whole structure. This ventilation grille has a prominent flange of 15 mm. The total diameter of the model is 90 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 120 mm, slat angle: 45° with central reinforcement (📦 #1333)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL file ∅ 120 mm, slat angle: 45° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its male diameter measures 120 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This 3D vent cover has a thin flange of 5 mm. The overall diameter of the model is 130 mm.
Parameter Value Unit
male diameter 120 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 140 mm, slat angle: 15° with central reinforcement (📦 #1296)

1 object(s) - format STL
Round air vent STL 3D file ∅ 140 mm, slat angle: 15° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter is 140 mm. The slats have a slight angle of 15° and a low thickness of 1.6 mm. A central reinforcement reinforces the whole structure. This 3D vent cover has a collar of 6 mm. The full diameter of this model is 152 mm.
Parameter Value Unit
male diameter 140 mm
slat angle 15 °
slat thickness 1.6 mm
flange width 6 mm
central reinforcement yes

Round air vent STL file ∅ 200 mm, slat angle: 45° with central reinforcement (📦 #1304)

1 object(s) - format STL (5.0/5) 2 vote(s)
Round air vent STL file ∅ 200 mm, slat angle: 45° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter is 200 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the slats. This vent grille has a thin flange of 5 mm. The total diameter of this model is 210 mm.
Parameter Value Unit
male diameter 200 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 250 mm, slat angle: 45° with central reinforcement (📦 #1422)

1 object(s) - format STL
Round air vent STL 3D file ∅ 250 mm, slat angle: 45° with central reinforcement
3D file of a round vent cover for ventilation in STL format. Its male diameter measures 250 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This 3D aeration grille features a flange of 10 mm. The full diameter of this model is 270 mm.
Parameter Value Unit
male diameter 250 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 55 mm, slat angle: 30° with central reinforcement (📦 #1429)

1 object(s) - format STL
Round air vent STL file ∅ 55 mm, slat angle: 30° with central reinforcement
3D model of a round air vent for ventilation in STL format. Its insertion diameter measures 55 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the slats. This vent grille features a prominent flange of 20 mm. The overall diameter of the model is 95 mm.
Parameter Value Unit
male diameter 55 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 30° with central reinforcement (📦 #2746)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 30° with central reinforcement
Design of a round air vent for air circulation in STL format. Its male diameter measures 100 mm. The slats have a slight angle of 30° and a high thickness of 1.8 mm. A centered vertical reinforcement secures the whole structure. This 3D aeration grille features a thin flange of 5 mm. The full diameter of this model is 110 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 30 °
slat thickness 1.8 mm
flange width 5 mm
central reinforcement yes