Round air vent ∅ 180 mm, slat angle: 30° with central reinforcement 📦#1388

3D file of a round air vent for air circulation in STL format. Its male diameter is 180 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement secures the slats. This aeration grille has a prominent flange of 12 mm.

Generation date: 2025-08-20

3D Model Round air vent ∅ 180 mm, slat angle: 30° with central reinforcement

3D model download

Free

Download format: zip : 9 Mo (1 file(s))

round-air-vent-dia180mm-slD30d_model1388-nb0_dd{id}.stl : 9 Mo

STL Mesh quality : 0.1 0.1

License: CC BY-NC-ND - Creative commons

(attribution - non commercial use - no derivatives)

Values for this model

This model was generated by the Round air vent grill template, with the following values:

	Template parameter	Value	Unit	Label
#1	male diameter	180	mm	dia
#2	slat angle	30	°	slD
#3	slat thickness	2	mm	slT
#4	flange width	12	mm	flW
#5	central reinforcement	1	0,1	renf

Representation of the parameters

Related 3D models

To search for a model based on your own parameters, go to the template page Round air vent grill

Round air vent ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1464)

1 object(s) - format STL

3D model Round air vent ∅ 125 mm, slat angle: 45° with central reinforcement

Design of a round air vent for air circulation in STL format. Its insertion diameter measures 125 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D ventilation grille features a collar of 10 mm.

Parameter	Value	Unit
male diameter	125	mm
slat angle	45	°
slat thickness	2	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 170 mm, slat angle: 10° with central reinforcement (📦 #1311)

1 object(s) - format STL

3D model Round air vent ∅ 170 mm, slat angle: 10° with central reinforcement

Design of a round vent cover for air circulation in STL format. Its insertion diameter measures 170 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the whole structure. This ventilation grille features a collar of 10 mm.

Parameter	Value	Unit
male diameter	170	mm
slat angle	10	°
slat thickness	2	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 150 mm, slat angle: 10° with central reinforcement (📦 #1281)

1 object(s) - format STL (4.0/5) 1 vote(s)

3D model Round air vent ∅ 150 mm, slat angle: 10° with central reinforcement

3D file of a round vent cover for ventilation in STL format. Its male diameter measures 150 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement strengthens the whole structure. This 3D ventilation grille features a collar of 10 mm.

Parameter	Value	Unit
male diameter	150	mm
slat angle	10	°
slat thickness	2	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 168 mm, slat angle: 45° with central reinforcement (📦 #1427)

1 object(s) - format STL

3D model Round air vent ∅ 168 mm, slat angle: 45° with central reinforcement

3D model of a round vent cover for air circulation in STL format. Its male diameter measures 168 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the slats. This 3D ventilation grille has a collar of 10 mm.

Parameter	Value	Unit
male diameter	168	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 152 mm, slat angle: 30° with central reinforcement (📦 #1441)

1 object(s) - format STL

3D model Round air vent ∅ 152 mm, slat angle: 30° with central reinforcement

3D design of a round grille for ventilation in STL format. Its male diameter is 152 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A central reinforcement reinforces the slats. This 3D aeration grille has a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	152	mm
slat angle	30	°
slat thickness	2.4	mm
flange width	5	mm
central reinforcement	1	0,1

Round air vent ∅ 152 mm, slat angle: 45° with central reinforcement (📦 #1293)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D model Round air vent ∅ 152 mm, slat angle: 45° with central reinforcement

3D file of a round grille for ventilation in STL format. Its insertion diameter is 152 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the whole structure. This 3D vent cover has a thin flange of 3 mm.

Parameter	Value	Unit
male diameter	152	mm
slat angle	45	°
slat thickness	2	mm
flange width	3	mm
central reinforcement	1	0,1

Round air vent ∅ 250 mm, slat angle: 45° with central reinforcement (📦 #1422)

1 object(s) - format STL

3D model Round air vent ∅ 250 mm, slat angle: 45° with central reinforcement

3D design of a round air vent for ventilation in STL format. Its male diameter is 250 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement strengthens the slats. This 3D aeration grille has a flange of 10 mm.

Parameter	Value	Unit
male diameter	250	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 140 mm, slat angle: 15° with central reinforcement (📦 #1296)

1 object(s) - format STL

3D model Round air vent ∅ 140 mm, slat angle: 15° with central reinforcement

File of a round vent cover for air circulation in STL format. Its male diameter measures 140 mm. The slats have a slight angle of 15° and a low thickness of 1.6 mm. A vertical reinforcement secures the whole structure. This ventilation grille has a collar of 6 mm.

Parameter	Value	Unit
male diameter	140	mm
slat angle	15	°
slat thickness	1.6	mm
flange width	6	mm
central reinforcement	1	0,1

Round air vent ∅ 200 mm, slat angle: 45° with central reinforcement (📦 #1304)

1 object(s) - format STL (5.0/5) 2 vote(s)

3D model Round air vent ∅ 200 mm, slat angle: 45° with central reinforcement

3D file of a round vent cover for air circulation in STL format. Its male diameter measures 200 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the whole structure. This aeration grille has a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	200	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	1	0,1

Round air vent ∅ 300 mm, slat angle: 30° with central reinforcement (📦 #1286)

1 object(s) - format STL (4.5/5) 2 vote(s)

3D model Round air vent ∅ 300 mm, slat angle: 30° with central reinforcement

File of a round grille for ventilation in STL format. Its male diameter measures 300 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A central reinforcement reinforces the slats. This 3D aeration grille features a collar of 10 mm.

Parameter	Value	Unit
male diameter	300	mm
slat angle	30	°
slat thickness	2.4	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 152 mm, slat angle: 50° with central reinforcement (📦 #1298)

1 object(s) - format STL

3D model Round air vent ∅ 152 mm, slat angle: 50° with central reinforcement

File of a round air vent for ventilation in STL format. Its male diameter measures 152 mm. The slats have a steep angle of 50° and a high thickness of 2 mm. A centered vertical reinforcement secures the whole structure. This ventilation grille has a thin flange of 3 mm.

Parameter	Value	Unit
male diameter	152	mm
slat angle	50	°
slat thickness	2	mm
flange width	3	mm
central reinforcement	1	0,1

Round air vent ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #1322)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D model Round air vent ∅ 150 mm, slat angle: 40° with central reinforcement

3D design of a round grille for air circulation in STL format. Its insertion diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A vertical reinforcement secures the whole structure. This 3D aeration grille features a thin flange of 3 mm.

Parameter	Value	Unit
male diameter	150	mm
slat angle	40	°
slat thickness	1.6	mm
flange width	3	mm
central reinforcement	1	0,1

Round air vent ∅ 155 mm, slat angle: 45° with central reinforcement (📦 #1416)

1 object(s) - format STL

3D model Round air vent ∅ 155 mm, slat angle: 45° with central reinforcement

File of a round vent cover for ventilation in STL format. Its male diameter is 155 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A central reinforcement reinforces the slats. This vent grille features a prominent flange of 20 mm.

Parameter	Value	Unit
male diameter	155	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	20	mm
central reinforcement	1	0,1

Round air vent ∅ 168 mm, slat angle: 45° with central reinforcement (📦 #1428)

1 object(s) - format STL

3D model Round air vent ∅ 168 mm, slat angle: 45° with central reinforcement

3D design of a round grille for air circulation in STL format. Its insertion diameter measures 168 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A central reinforcement secures the slats. This vent grille features a flange of 10 mm.

Parameter	Value	Unit
male diameter	168	mm
slat angle	45	°
slat thickness	1.4	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 120 mm, slat angle: 45° with central reinforcement (📦 #1333)

1 object(s) - format STL

3D model Round air vent ∅ 120 mm, slat angle: 45° with central reinforcement

File of a round grille for ventilation in STL format. Its insertion diameter measures 120 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the slats. This 3D vent grille has a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	120	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	1	0,1

Round air vent ∅ 50 mm, slat angle: 45° with central reinforcement (📦 #1436)

1 object(s) - format STL

3D model Round air vent ∅ 50 mm, slat angle: 45° with central reinforcement

3D design of a round air vent for air circulation in STL format. Its male diameter measures 50 mm. The slats have an angle of 45° and a high thickness of 1.8 mm. A vertical reinforcement secures the whole structure. This 3D ventilation grille has a flange of 10 mm.

Parameter	Value	Unit
male diameter	50	mm
slat angle	45	°
slat thickness	1.8	mm
flange width	10	mm
central reinforcement	1	0,1

Round air vent ∅ 118 mm, slat angle: 45° with central reinforcement (📦 #1413)

1 object(s) - format STL

3D model Round air vent ∅ 118 mm, slat angle: 45° with central reinforcement

3D design of a round vent cover for air circulation in STL format. Its insertion diameter measures 118 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A central reinforcement strengthens the whole structure. This 3D vent grille has a prominent flange of 20 mm.

Parameter	Value	Unit
male diameter	118	mm
slat angle	45	°
slat thickness	2.4	mm
flange width	20	mm
central reinforcement	1	0,1

Round air vent ∅ 93.6 mm, slat angle: 30° with central reinforcement (📦 #1327)

1 object(s) - format STL

3D model Round air vent ∅ 93.6 mm, slat angle: 30° with central reinforcement

3D file of a round vent cover for ventilation in STL format. Its insertion diameter measures 93.6 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement reinforces the slats. This ventilation grille features a thin flange of 3 mm.

Parameter	Value	Unit
male diameter	93.6	mm
slat angle	30	°
slat thickness	1.6	mm
flange width	3	mm
central reinforcement	1	0,1

Round air vent ∅ 127 mm, slat angle: 45° with central reinforcement (📦 #1415)

1 object(s) - format STL

3D model Round air vent ∅ 127 mm, slat angle: 45° with central reinforcement

Design of a round air vent for ventilation in STL format. Its male diameter measures 127 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the whole structure. This 3D vent grille features a prominent flange of 20 mm.

Parameter	Value	Unit
male diameter	127	mm
slat angle	45	°
slat thickness	1.5	mm
flange width	20	mm
central reinforcement	1	0,1

Round air vent ∅ 93.7 mm, slat angle: 30° (📦 #1331)

1 object(s) - format STL

3D model Round air vent ∅ 93.7 mm, slat angle: 30°

Model of a round air vent for ventilation in STL format. Its insertion diameter is 93.7 mm. The slats have a slight angle of 30° and a high thickness of 1.8 mm. This 3D aeration grille features a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	93.7	mm
slat angle	30	°
slat thickness	1.8	mm
flange width	5	mm
central reinforcement	0	0,1

Round air vent ∅ 71.2 mm, slat angle: 45° with central reinforcement (📦 #1396)

1 object(s) - format STL

3D model Round air vent ∅ 71.2 mm, slat angle: 45° with central reinforcement

3D model of a round air vent for air circulation in STL format. Its male diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the slats. This 3D ventilation grille features a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	71.2	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	1	0,1

Round air vent ∅ 55 mm, slat angle: 30° with central reinforcement (📦 #1429)

1 object(s) - format STL

3D model Round air vent ∅ 55 mm, slat angle: 30° with central reinforcement

3D file of a round grille for air circulation in STL format. Its insertion diameter measures 55 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille has a prominent flange of 20 mm.

Parameter	Value	Unit
male diameter	55	mm
slat angle	30	°
slat thickness	1.6	mm
flange width	20	mm
central reinforcement	1	0,1

Round air vent ∅ 70 mm, slat angle: 45° with central reinforcement (📦 #1282)

1 object(s) - format STL

3D model Round air vent ∅ 70 mm, slat angle: 45° with central reinforcement

3D file of a round air vent for ventilation in STL format. Its insertion diameter is 70 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement reinforces the slats. This 3D vent grille features a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	70	mm
slat angle	45	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	1	0,1

Round air vent ∅ 60 mm, slat angle: 45° with central reinforcement (📦 #1412)

1 object(s) - format STL (5.0/5) 1 vote(s)

3D model Round air vent ∅ 60 mm, slat angle: 45° with central reinforcement

3D model of a round vent cover for ventilation in STL format. Its male diameter measures 60 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the slats. This aeration grille features a prominent flange of 15 mm.

Parameter	Value	Unit
male diameter	60	mm
slat angle	45	°
slat thickness	1.5	mm
flange width	15	mm
central reinforcement	1	0,1

Round air vent ∅ 152 mm, slat angle: 45° (📦 #1335)

1 object(s) - format STL

3D model Round air vent ∅ 152 mm, slat angle: 45°

Design of a round vent cover for air circulation in STL format. Its insertion diameter measures 152 mm. The slats have an angle of 45° and a high thickness of 2 mm. This 3D vent grille features a thin flange of 3 mm.

Parameter	Value	Unit
male diameter	152	mm
slat angle	45	°
slat thickness	2	mm
flange width	3	mm
central reinforcement	0	0,1

Round air vent ∅ 120 mm, slat angle: 30° (📦 #1329)

1 object(s) - format STL (4.0/5) 1 vote(s)

3D model Round air vent ∅ 120 mm, slat angle: 30°

Design of a round grille for ventilation in STL format. Its insertion diameter measures 120 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This 3D vent cover has a thin flange of 5 mm.

Parameter	Value	Unit
male diameter	120	mm
slat angle	30	°
slat thickness	1.6	mm
flange width	5	mm
central reinforcement	0	0,1