?>

Round-to-Rectangular Tube Adapter STL file ⌀300 mm to 120×100 mm, thickness 2 mm + offset 📦#1937

STL Download STL
Create a new model:
from scratch search for a model
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀300 mm and a rectangular section with inner dimensions 120×100 mm. The wall thickness is 2 mm and the total length is 300 mm. The adapter has an offset of 40 mm along the Y axis and 40 mm along the Z axis.
Generation date: 2025-09-22
3D Model Round-to-Rectangular Tube Adapter STL file ⌀300 mm to 120×100 mm, thickness 2 mm + offset

3D model download

Free
  • round-to-rectangular-adapter-d_model1937-nb0_dd{id}.stl : 2.8 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Round to rectangular adapter template, with the following values:
Parameter Value
#1 cylinder outer diameter 300 mm
#2 cylinder inlet length 100 mm
#3 rectangle internal length 120 mm
#4 rectangle internal height 100 mm
#5 rectangle inlet length 100 mm
#6 offset Z 40 mm
#7 offset Y 40 mm
#8 total length 300 mm
#9 thickness 2 mm
#10 chamfer no chamfer
illustration of the parameters
Representation of the parameters

  • If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
  • The stop at the bottom of the rectangular section has a width equal to half the thickness.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 cylinder outer diameter diaC
#2 cylinder inlet length lentC
#3 rectangle internal length lenIR
#4 rectangle internal height heiIR
#5 rectangle inlet length lentR
#6 offset Z ofsZ
#7 offset Y ofsY
#8 total length lenT
#9 thickness thi
#10 chamfer cha

Related 3D models

To search for a model based on your own parameters, go to the template page Round to rectangular adapter 

Round-to-Rectangular Tube Adapter STL file ⌀154 mm to 80×50 mm, thickness 2 mm + offset (📦 #1652)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀154 mm to 80×50 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀154 mm and a rectangular section with internal dimensions 80×50 mm. The wall thickness is 2 mm and the overall length is 175 mm. The adapter has an offset of 25 mm along the Y axis and 25 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 154 mm
cylinder inlet length 35 mm
rectangle internal length 80 mm
rectangle internal height 50 mm
rectangle inlet length 75 mm
offset Z 25 mm
offset Y 25 mm
total length 175 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀108 mm to 297×67 mm, thickness 3 mm + offset (📦 #1771)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀108 mm to 297×67 mm, thickness 3 mm + offset
Download this 3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀108 mm and a rectangular section with internal dimensions 297×67 mm. The wall thickness is 3 mm and the total length is 250 mm. The adapter has an offset of 25 mm along the Y axis.
Parameter Value Unit
cylinder outer diameter 108 mm
cylinder inlet length 100 mm
rectangle internal length 297 mm
rectangle internal height 67 mm
rectangle inlet length 100 mm
offset Z 0 mm
offset Y 25 mm
total length 250 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 80×50 mm, thickness 3 mm + offset (📦 #1571)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 80×50 mm, thickness 3 mm + offset
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀150 mm and a rectangular section with internal dimensions 80×50 mm. The wall thickness is 3 mm and the overall length is 150 mm. The adapter has an offset of 25 mm along the Y axis and 25 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 50 mm
rectangle internal length 80 mm
rectangle internal height 50 mm
rectangle inlet length 50 mm
offset Z 25 mm
offset Y 25 mm
total length 150 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀76 mm to 160×25 mm, thickness 3 mm + offset (📦 #2258)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀76 mm to 160×25 mm, thickness 3 mm + offset
Model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀76 mm and a rectangular section with inner dimensions 160×25 mm. The shell thickness is 3 mm and the overall length is 250 mm. The adapter has an offset of 25 mm along the Y axis and 25 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 76 mm
cylinder inlet length 50 mm
rectangle internal length 160 mm
rectangle internal height 25 mm
rectangle inlet length 100 mm
offset Z 25 mm
offset Y 25 mm
total length 250 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 135×75 mm, thickness 2 mm + offset (📦 #1975)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 135×75 mm, thickness 2 mm + offset
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 135×75 mm. The shell thickness is 2 mm and the overall length is 160 mm. The adapter has an offset of 30 mm along the Y axis and 30 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 35 mm
rectangle internal length 135 mm
rectangle internal height 75 mm
rectangle inlet length 60 mm
offset Z 30 mm
offset Y 30 mm
total length 160 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 120×40 mm, thickness 2 mm + offset (📦 #1938)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 120×40 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 120×40 mm. The shell thickness is 2 mm and the total length is 175 mm. The adapter has an offset of 25 mm along the Y axis and 25 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 35 mm
rectangle internal length 120 mm
rectangle internal height 40 mm
rectangle inlet length 75 mm
offset Z 25 mm
offset Y 25 mm
total length 175 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀300 mm to 50×100 mm, thickness 2 mm (📦 #1976)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀300 mm to 50×100 mm, thickness 2 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀300 mm and a rectangular section with inner dimensions 50×100 mm. The wall thickness is 2 mm and the total length is 200 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 300 mm
cylinder inlet length 100 mm
rectangle internal length 50 mm
rectangle internal height 100 mm
rectangle inlet length 50 mm
offset Z 0 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀90 mm to 80×80 mm, thickness 2 mm + offset (📦 #2048)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀90 mm to 80×80 mm, thickness 2 mm + offset
Model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀90 mm and a rectangular section with inner dimensions 80×80 mm. The shell thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 25 mm along the Y axis.
Parameter Value Unit
cylinder outer diameter 90 mm
cylinder inlet length 50 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 50 mm
offset Z 0 mm
offset Y 25 mm
total length 150 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀204 mm to 300×60 mm, thickness 3 mm + offset (📦 #2083)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀204 mm to 300×60 mm, thickness 3 mm + offset
3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀204 mm and a rectangular section with internal dimensions 300×60 mm. The wall thickness is 3 mm and the total length is 148 mm. The adapter has an offset of 44 mm along the Y axis and 44 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 204 mm
cylinder inlet length 10 mm
rectangle internal length 300 mm
rectangle internal height 60 mm
rectangle inlet length 50 mm
offset Z 44 mm
offset Y 44 mm
total length 148 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀180 mm to 180×50 mm, thickness 3 mm (📦 #1915)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀180 mm to 180×50 mm, thickness 3 mm
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀180 mm and a rectangular section with inner dimensions 180×50 mm. The wall thickness is 3 mm and the overall length is 250 mm.
Parameter Value Unit
cylinder outer diameter 180 mm
cylinder inlet length 80 mm
rectangle internal length 180 mm
rectangle internal height 50 mm
rectangle inlet length 50 mm
offset Z 0 mm
offset Y 0 mm
total length 250 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀206 mm to 300×60 mm, thickness 3 mm + offset (📦 #2084)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀206 mm to 300×60 mm, thickness 3 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀206 mm and a rectangular section with inner dimensions 300×60 mm. The wall thickness is 3 mm and the overall length is 220 mm. The adapter has an offset of 44 mm along the Y axis and 44 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 206 mm
cylinder inlet length 10 mm
rectangle internal length 300 mm
rectangle internal height 60 mm
rectangle inlet length 50 mm
offset Z 44 mm
offset Y 44 mm
total length 220 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 105×50 mm, thickness 2 mm + offset (📦 #1653)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 105×50 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀80 mm and a rectangular section with internal dimensions 105×50 mm. The wall thickness is 2 mm and the total length is 150 mm. The adapter has an offset of 25 mm along the Y axis.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 50 mm
rectangle internal length 105 mm
rectangle internal height 50 mm
rectangle inlet length 50 mm
offset Z 0 mm
offset Y 25 mm
total length 150 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 30×30 mm, thickness 4 mm + offset (📦 #1848)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 30×30 mm, thickness 4 mm + offset
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀80 mm and a rectangular section with inner dimensions 30×30 mm. The shell thickness is 4 mm and the overall length is 240 mm. The adapter has an offset of 20 mm along the Y axis and 20 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 100 mm
rectangle internal length 30 mm
rectangle internal height 30 mm
rectangle inlet length 100 mm
offset Z 20 mm
offset Y 20 mm
total length 240 mm
thickness 4 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀125 mm to 110×110 mm, thickness 3 mm + offset (📦 #1782)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀125 mm to 110×110 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀125 mm and a rectangular section with internal dimensions 110×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 125 mm
cylinder inlet length 60 mm
rectangle internal length 110 mm
rectangle internal height 110 mm
rectangle inlet length 60 mm
offset Z 40 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀128 mm to 60×110 mm, thickness 3 mm + offset (📦 #1783)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀128 mm to 60×110 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀128 mm and a rectangular section with internal dimensions 60×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 128 mm
cylinder inlet length 60 mm
rectangle internal length 60 mm
rectangle internal height 110 mm
rectangle inlet length 60 mm
offset Z 40 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀250 mm to 250×150 mm, thickness 3 mm + offset (📦 #2131)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀250 mm to 250×150 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀250 mm and a rectangular section with internal dimensions 250×150 mm. The shell thickness is 3 mm and the total length is 165 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 250 mm
cylinder inlet length 50 mm
rectangle internal length 250 mm
rectangle internal height 150 mm
rectangle inlet length 80 mm
offset Z 15 mm
offset Y 0 mm
total length 165 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀260 mm to 100×50 mm, thickness 3 mm + offset (📦 #1540)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀260 mm to 100×50 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀260 mm and a rectangular section with internal dimensions 100×50 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 50 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end to ease insertion.
Parameter Value Unit
cylinder outer diameter 260 mm
cylinder inlet length 25 mm
rectangle internal length 100 mm
rectangle internal height 50 mm
rectangle inlet length 50 mm
offset Z 50 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 100×25 mm, thickness 2 mm + offset (📦 #2161)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 100×25 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 100×25 mm. The shell thickness is 2 mm and the overall length is 250 mm. The adapter has an offset of 50 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 50 mm
rectangle internal length 100 mm
rectangle internal height 25 mm
rectangle inlet length 100 mm
offset Z 50 mm
offset Y 0 mm
total length 250 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 120×120 mm, thickness 3 mm + offset (📦 #1799)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 120×120 mm, thickness 3 mm + offset
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀120 mm and a rectangular section with internal dimensions 120×120 mm. The shell thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 50 mm
rectangle internal length 120 mm
rectangle internal height 120 mm
rectangle inlet length 100 mm
offset Z 2 mm
offset Y 2 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀128 mm to 60×110 mm, thickness 3 mm + offset (📦 #1784)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀128 mm to 60×110 mm, thickness 3 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀128 mm and a rectangular section with inner dimensions 60×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis. A chamfer is present on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 128 mm
cylinder inlet length 60 mm
rectangle internal length 60 mm
rectangle internal height 110 mm
rectangle inlet length 60 mm
offset Z 40 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀76.2 mm to 200×50.8 mm, thickness 4 mm + offset (📦 #2134)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀76.2 mm to 200×50.8 mm, thickness 4 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀76.2 mm and a rectangular section with internal dimensions 200×50.8 mm. The shell thickness is 4 mm and the overall length is 166 mm. The adapter has an offset of 20 mm along the Y axis.
Parameter Value Unit
cylinder outer diameter 76.2 mm
cylinder inlet length 76 mm
rectangle internal length 200 mm
rectangle internal height 50.8 mm
rectangle inlet length 50 mm
offset Z 0 mm
offset Y 20 mm
total length 166 mm
thickness 4 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 120×120 mm, thickness 2 mm (📦 #1800)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 120×120 mm, thickness 2 mm
Download this model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀120 mm and a rectangular section with internal dimensions 120×120 mm. The shell thickness is 2 mm and the overall length is 200 mm. A chamfer is applied on the outside of the cylindrical end to ease insertion.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 50 mm
rectangle internal length 120 mm
rectangle internal height 120 mm
rectangle inlet length 100 mm
offset Z 0 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀124 mm to 180×180 mm, thickness 2 mm + offset (📦 #2164)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀124 mm to 180×180 mm, thickness 2 mm + offset
Download this 3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀124 mm and a rectangular section with inner dimensions 180×180 mm. The wall thickness is 2 mm and the total length is 100 mm. The adapter has an offset of 20 mm along the Y axis and 20 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 124 mm
cylinder inlet length 40 mm
rectangle internal length 180 mm
rectangle internal height 180 mm
rectangle inlet length 20 mm
offset Z 20 mm
offset Y 20 mm
total length 100 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀132 mm to 114×58 mm, thickness 3 mm + offset (📦 #2417)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀132 mm to 114×58 mm, thickness 3 mm + offset
Model in STL format of a round-to-rectangular adapter with an external diameter of ⌀132 mm and a rectangular section with inner dimensions 114×58 mm. The wall thickness is 3 mm and the total length is 220 mm. The adapter has an offset of 35 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 132 mm
cylinder inlet length 50 mm
rectangle internal length 114 mm
rectangle internal height 58 mm
rectangle inlet length 99 mm
offset Z 35 mm
offset Y 0 mm
total length 220 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 250×50 mm, thickness 2 mm + offset (📦 #2138)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 250×50 mm, thickness 2 mm + offset
Download this 3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀120 mm and a rectangular section with inner dimensions 250×50 mm. The wall thickness is 2 mm and the total length is 165 mm. The adapter has an offset of 30 mm along the Y axis and 10 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 5 mm
rectangle internal length 250 mm
rectangle internal height 50 mm
rectangle inlet length 60 mm
offset Z 10 mm
offset Y 30 mm
total length 165 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀105 mm to 297×67 mm, thickness 3 mm (📦 #1613)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀105 mm to 297×67 mm, thickness 3 mm
3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀105 mm and a rectangular section with internal dimensions 297×67 mm. The wall thickness is 3 mm and the overall length is 250 mm.
Parameter Value Unit
cylinder outer diameter 105 mm
cylinder inlet length 100 mm
rectangle internal length 297 mm
rectangle internal height 67 mm
rectangle inlet length 100 mm
offset Z 0 mm
offset Y 0 mm
total length 250 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀200 mm to 200×60 mm, thickness 2 mm + offset (📦 #2071)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀200 mm to 200×60 mm, thickness 2 mm + offset
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀200 mm and a rectangular section with inner dimensions 200×60 mm. The shell thickness is 2 mm and the overall length is 200 mm. The adapter has an offset of 45 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 200 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 45 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 198×98 mm, thickness 2 mm (📦 #1970)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 198×98 mm, thickness 2 mm
File in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀150 mm and a rectangular section with internal dimensions 198×98 mm. The shell thickness is 2 mm and the overall length is 152 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 75 mm
rectangle internal length 198 mm
rectangle internal height 98 mm
rectangle inlet length 50 mm
offset Z 0 mm
offset Y 0 mm
total length 152 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀210 mm to 200×60 mm, thickness 3 mm + offset (📦 #1539)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀210 mm to 200×60 mm, thickness 3 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀210 mm and a rectangular section with inner dimensions 200×60 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 210 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer