Pipe elbow 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm 📦#1612

STL Download STL
Create a new model:
from scratch search for a model
Model of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 300 mm and an inner diameter of 280 mm. The tube thickness is therefore 10 mm. The ends feature fillets to make it easier to insert.
Generation date: 2025-09-07
3D Model Pipe elbow 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm

3D model download

Free
  • pipe-elbow-ouD300mm-inD280mm-d_model1612-nb0_dd{id}.stl : 2.4 Mo
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
(Internal and private use, non-commercial – no distribution – no derivatives)
Please answer the anti-robot question:
🥝🥝🥥🥝🥥🥝🥥🥥🥝

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 300 mm
#2 inner diameter 280 mm
#3 angle 90 °
#4 end fillets yes
illustration of the parameters
Representation of the parameters

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm (📦 #1611)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm
Pipe elbow 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an external diameter of 300 mm and an internal diameter of 280 mm. The tube thickness is therefore 10 mm.
Parameter Value Unit
outer diameter300mm
inner diameter280mm
angle90°
end fillets0

Pipe elbow 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm (📦 #1425)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm
Pipe elbow 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm
File of an elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 250 mm and an inner diameter of 240 mm. The tube thickness is therefore 5 mm.
Parameter Value Unit
outer diameter250mm
inner diameter240mm
angle90°
end fillets0

Pipe elbow 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm (📦 #1418)

1 object(s) - format STL
3D model Pipe elbow 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm
Pipe elbow 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 180 mm and an internal diameter of 160 mm. This results in a tube thickness of 10 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter180mm
inner diameter160mm
angle45°
end fillets1

Pipe elbow 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1549)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
Pipe elbow 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter160mm
inner diameter155mm
angle90°
end fillets0

Pipe elbow 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1417)

1 object(s) - format STL
3D model Pipe elbow 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
Pipe elbow 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter160mm
inner diameter155mm
angle70°
end fillets0

Pipe elbow 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm (📦 #1353)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm
Pipe elbow 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 120 mm and an inner diameter of 110 mm. This results in a tube thickness of 5 mm.
Parameter Value Unit
outer diameter120mm
inner diameter110mm
angle90°
end fillets0

Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm (📦 #1462)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm
Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 85 mm. This results in a tube thickness of 2.5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter90mm
inner diameter85mm
angle90°
end fillets1

Pipe elbow 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm (📦 #1490)

1 object(s) - format STL
3D model Pipe elbow 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
Pipe elbow 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
3D file of a pipe elbow with a 1° angle in STL format. This pipe elbow features an outer diameter of 123 mm and an inner diameter of 120 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter123mm
inner diameter120mm
angle1°
end fillets0

Pipe elbow 180° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm (📦 #1488)

1 object(s) - format STL
3D model Pipe elbow 180° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
Pipe elbow 180° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
3D file of an elbow with a 180° angle in STL format. This pipe elbow features an outer diameter of 123 mm and an inner diameter of 120 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter123mm
inner diameter120mm
angle180°
end fillets0

Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1636)

1 object(s) - format STL
3D model Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter90mm
inner diameter82mm
angle45°
end fillets1

Pipe elbow 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm (📦 #1446)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm
Pipe elbow 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 77 mm. The tube thickness is therefore 1.5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter80mm
inner diameter77mm
angle90°
end fillets1

Pipe elbow 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm (📦 #1469)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm
Pipe elbow 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm
Model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 75 mm. The tube thickness is therefore 2.5 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter80mm
inner diameter75mm
angle90°
end fillets1

Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1445)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Pipe elbow 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 90° angle in STL format. This elbow has an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter90mm
inner diameter82mm
angle90°
end fillets0

Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1370)

1 object(s) - format STL
3D model Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Pipe elbow 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an outer diameter of 90 mm and an inner diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter90mm
inner diameter82mm
angle45°
end fillets0

Pipe elbow 90° ⌀OD: 54 mm ⌀ID: 50 mm thickness: 2 mm (📦 #1642)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 54 mm ⌀ID: 50 mm thickness: 2 mm
Pipe elbow 90° ⌀OD: 54 mm ⌀ID: 50 mm thickness: 2 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 54 mm and an internal diameter of 50 mm. This results in a tube thickness of 2 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter54mm
inner diameter50mm
angle90°
end fillets1

Pipe elbow 90° ⌀OD: 50 mm ⌀ID: 44 mm thickness: 3 mm (📦 #1494)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 50 mm ⌀ID: 44 mm thickness: 3 mm
Pipe elbow 90° ⌀OD: 50 mm ⌀ID: 44 mm thickness: 3 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 50 mm and an internal diameter of 44 mm. This results in a tube thickness of 3 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter50mm
inner diameter44mm
angle90°
end fillets1

Pipe elbow 60° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm (📦 #1376)

1 object(s) - format STL
3D model Pipe elbow 60° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm
Pipe elbow 60° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm
Model of a pipe elbow with a 60° angle in STL format. This pipe elbow has an external diameter of 45 mm and an internal diameter of 43 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter45mm
inner diameter43mm
angle60°
end fillets1

Pipe elbow 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm (📦 #1375)

1 object(s) - format STL
3D model Pipe elbow 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm
Pipe elbow 37° ⌀OD: 48 mm ⌀ID: 44 mm thickness: 2 mm
3D file of an elbow with a 37° angle in STL format. This elbow has an external diameter of 48 mm and an internal diameter of 44 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter48mm
inner diameter44mm
angle37°
end fillets1

Pipe elbow 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm (📦 #1374)

1 object(s) - format STL
3D model Pipe elbow 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm
Pipe elbow 30° ⌀OD: 60 mm ⌀ID: 58 mm thickness: 1 mm
3D model of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 60 mm and an inner diameter of 58 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter60mm
inner diameter58mm
angle30°
end fillets0

Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1580)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 40 mm and an internal diameter of 34 mm. The tube thickness is therefore 3 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle90°
end fillets1

Pipe elbow 170° ⌀OD: 45 mm ⌀ID: 41 mm thickness: 2 mm (📦 #1386)

1 object(s) - format STL
3D model Pipe elbow 170° ⌀OD: 45 mm ⌀ID: 41 mm thickness: 2 mm
Pipe elbow 170° ⌀OD: 45 mm ⌀ID: 41 mm thickness: 2 mm
Model of an elbow with a 170° angle in STL format. This elbow has an external diameter of 45 mm and an internal diameter of 41 mm. This results in a tube thickness of 2 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter45mm
inner diameter41mm
angle170°
end fillets1

Pipe elbow 80° ⌀OD: 50 mm ⌀ID: 16 mm thickness: 17 mm (📦 #1554)

1 object(s) - format STL
3D model Pipe elbow 80° ⌀OD: 50 mm ⌀ID: 16 mm thickness: 17 mm
Pipe elbow 80° ⌀OD: 50 mm ⌀ID: 16 mm thickness: 17 mm
Model of a pipe elbow with an 80° angle in STL format. This pipe elbow features an external diameter of 50 mm and an internal diameter of 16 mm. The tube thickness is therefore 17 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter50mm
inner diameter16mm
angle80°
end fillets1

Pipe elbow 120° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm (📦 #1438)

1 object(s) - format STL
3D model Pipe elbow 120° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm
Pipe elbow 120° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm
Model of a pipe elbow with a 120° angle in STL format. This elbow features an external diameter of 34 mm and an internal diameter of 30 mm. The tube thickness is therefore 2 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter34mm
inner diameter30mm
angle120°
end fillets1

Pipe elbow 60° ⌀OD: 32 mm ⌀ID: 28 mm thickness: 2 mm (📦 #1381)

1 object(s) - format STL
3D model Pipe elbow 60° ⌀OD: 32 mm ⌀ID: 28 mm thickness: 2 mm
Pipe elbow 60° ⌀OD: 32 mm ⌀ID: 28 mm thickness: 2 mm
Model of a pipe elbow with a 60° angle in STL format. This pipe elbow has an outer diameter of 32 mm and an inner diameter of 28 mm. The tube thickness is therefore 2 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter32mm
inner diameter28mm
angle60°
end fillets1

Pipe elbow 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm (📦 #1363)

1 object(s) - format STL
3D model Pipe elbow 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm
Pipe elbow 30° ⌀OD: 50 mm ⌀ID: 46 mm thickness: 2 mm
Model of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 50 mm and an inner diameter of 46 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter50mm
inner diameter46mm
angle30°
end fillets0

Pipe elbow 170° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm (📦 #1392)

1 object(s) - format STL
3D model Pipe elbow 170° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm
Pipe elbow 170° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm
File of an elbow with a 170° angle in STL format. This elbow features an external diameter of 40 mm and an internal diameter of 36 mm. The tube thickness is therefore 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter40mm
inner diameter36mm
angle170°
end fillets1

Pipe elbow 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm (📦 #1552)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm
Pipe elbow 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 43 mm and an inner diameter of 39.2 mm. This results in a tube thickness of 1.9 mm.
Parameter Value Unit
outer diameter43mm
inner diameter39.2mm
angle90°
end fillets0

Pipe elbow 90° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm (📦 #1402)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm
Pipe elbow 90° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm
Model of a pipe elbow with a 90° angle in STL format. This elbow has an external diameter of 30 mm and an internal diameter of 24 mm. The tube thickness is therefore 3 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter30mm
inner diameter24mm
angle90°
end fillets1

Pipe elbow 70° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm (📦 #1357)

1 object(s) - format STL
3D model Pipe elbow 70° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm
Pipe elbow 70° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm
3D model of a pipe elbow with a 70° angle in STL format. This elbow features an external diameter of 30 mm and an internal diameter of 24 mm. This results in a tube thickness of 3 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter30mm
inner diameter24mm
angle70°
end fillets1

Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1367)

1 object(s) - format STL
3D model Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
Pipe elbow 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter40mm
inner diameter34mm
angle90°
end fillets0