?>

Custom Pipe elbow STL file 45° ⌀OD: 156 mm ⌀ID: 152 mm thickness: 2 mm 📦#3292

STL Download STL 1
Create a new model:
from scratch search for a model
File of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 156 mm and an internal diameter of 152 mm. The tube thickness is therefore 2 mm. The ends feature fillets to make it easier to assemble.
Generation date: 2025-11-15
3D Model Pipe elbow STL file 45° ⌀OD: 156 mm ⌀ID: 152 mm thickness: 2 mm

3D model download

Free
  • pipe-elbow-ouD156mm-inD152mm-d_model3292-nb0_dd{id}.stl : 2 Mo
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 156 mm (≃6.14 in)
#2 inner diameter 152 mm (≃5.98 in)
#3 angle 45 °
#4 end fillets yes
Metadata Value
Tube wall thickness 2 mm (≃0.08 in)
illustration of the parameters
Parameter overview

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL file 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm (📦 #1418)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 180 mm and an internal diameter of 160 mm. This results in a tube thickness of 10 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 180 mm
inner diameter 160 mm
angle 45 °
end fillets yes

Tube elbow STL 3D file 45° ⌀OD: 180 mm ⌀ID: 177 mm thickness: 1.5 mm (📦 #3163)

1 object(s) - format STL
Tube elbow STL 3D file 45° ⌀OD: 180 mm ⌀ID: 177 mm thickness: 1.5 mm
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 180 mm and an internal diameter of 177 mm. This results in a tube thickness of 1.5 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 180 mm
inner diameter 177 mm
angle 45 °
end fillets yes

Tubing elbow STL file 90° ⌀OD: 150 mm ⌀ID: 146 mm thickness: 2 mm (📦 #3062)

1 object(s) - format STL
Tubing elbow STL file 90° ⌀OD: 150 mm ⌀ID: 146 mm thickness: 2 mm
File of an elbow with a 90° angle in STL format. This elbow features an outer diameter of 150 mm and an inner diameter of 146 mm. The tube thickness is therefore 2 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 150 mm
inner diameter 146 mm
angle 90 °
end fillets yes

Tube elbow STL file 90° ⌀OD: 150 mm ⌀ID: 145 mm thickness: 2.5 mm (📦 #3143)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 150 mm ⌀ID: 145 mm thickness: 2.5 mm
File of an elbow with a 90° angle in STL format. This elbow has an external diameter of 150 mm and an internal diameter of 145 mm. This results in a tube thickness of 2.5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 150 mm
inner diameter 145 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 99.8 mm ⌀ID: 97.8 mm thickness: 1 mm (📦 #2100)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 99.8 mm ⌀ID: 97.8 mm thickness: 1 mm
Model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 99.8 mm and an inner diameter of 97.8 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 99.8 mm
inner diameter 97.8 mm
angle 90 °
end fillets yes

Tubing elbow STL file 45° ⌀OD: 92.5 mm ⌀ID: 86.5 mm thickness: 3 mm (📦 #2893)

1 object(s) - format STL
Tubing elbow STL file 45° ⌀OD: 92.5 mm ⌀ID: 86.5 mm thickness: 3 mm
Model of an elbow with a 45° angle in STL format. This pipe elbow has an outer diameter of 92.5 mm and an inner diameter of 86.5 mm. The tube thickness is therefore 3 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 92.5 mm
inner diameter 86.5 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1417)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 160 mm
inner diameter 155 mm
angle 70 °
end fillets no

Tube elbow STL file 45° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm (📦 #3114)

1 object(s) - format STL
Tube elbow STL file 45° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm
3D file of a pipe elbow with a 45° angle in STL format. This elbow has an external diameter of 181 mm and an internal diameter of 176 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 181 mm
inner diameter 176 mm
angle 45 °
end fillets no

Pipe elbow STL file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1636)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 90 mm
inner diameter 82 mm
angle 45 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 128 mm ⌀ID: 124 mm thickness: 2 mm (📦 #3314)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 128 mm ⌀ID: 124 mm thickness: 2 mm
3D file of a pipe elbow with a 45° angle in STL format. This elbow has an external diameter of 128 mm and an internal diameter of 124 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 128 mm
inner diameter 124 mm
angle 45 °
end fillets no

Tube elbow STL 3D file 90° ⌀OD: 96 mm ⌀ID: 90 mm thickness: 3 mm (📦 #2591)

1 object(s) - format STL
Tube elbow STL 3D file 90° ⌀OD: 96 mm ⌀ID: 90 mm thickness: 3 mm
3D file of an elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 96 mm and an internal diameter of 90 mm. This results in a tube thickness of 3 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 96 mm
inner diameter 90 mm
angle 90 °
end fillets yes

Tubing elbow STL file 30° ⌀OD: 129 mm ⌀ID: 125 mm thickness: 2 mm (📦 #3329)

1 object(s) - format STL
Tubing elbow STL file 30° ⌀OD: 129 mm ⌀ID: 125 mm thickness: 2 mm
File of a tubing elbow with a 30° angle in STL format. This pipe elbow has an external diameter of 129 mm and an internal diameter of 125 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 129 mm
inner diameter 125 mm
angle 30 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1549)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 160 mm
inner diameter 155 mm
angle 90 °
end fillets no

Pipe elbow STL file 45° ⌀OD: 124 mm ⌀ID: 120 mm thickness: 2 mm (📦 #3305)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 124 mm ⌀ID: 120 mm thickness: 2 mm
3D file of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 124 mm and an internal diameter of 120 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 124 mm
inner diameter 120 mm
angle 45 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm (📦 #1462)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 85 mm. This results in a tube thickness of 2.5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 90 mm
inner diameter 85 mm
angle 90 °
end fillets yes

Tube elbow STL file 90° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm (📦 #3116)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 181 mm and an inner diameter of 176 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 181 mm
inner diameter 176 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 88 mm ⌀ID: 84 mm thickness: 2 mm (📦 #2387)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 88 mm ⌀ID: 84 mm thickness: 2 mm
3D file of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 88 mm and an internal diameter of 84 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 88 mm
inner diameter 84 mm
angle 90 °
end fillets yes

Pipe elbow STL file 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm (📦 #1490)

1 object(s) - format STL
Pipe elbow STL file 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
3D file of a pipe elbow with a 1° angle in STL format. This pipe elbow features an outer diameter of 123 mm and an inner diameter of 120 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 123 mm
inner diameter 120 mm
angle 1 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 78 mm ⌀ID: 76 mm thickness: 1 mm (📦 #2246)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 78 mm ⌀ID: 76 mm thickness: 1 mm
Model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 78 mm and an internal diameter of 76 mm. The tube thickness is therefore 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 78 mm
inner diameter 76 mm
angle 45 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 109.5 mm ⌀ID: 102.7 mm thickness: 3.4 mm (📦 #2085)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 109.5 mm ⌀ID: 102.7 mm thickness: 3.4 mm
3D file of an elbow with a 45° angle in STL format. This elbow features an external diameter of 109.5 mm and an internal diameter of 102.7 mm. This results in a tube thickness of 3.4 mm.
Parameter Value Unit
outer diameter 109.5 mm
inner diameter 102.7 mm
angle 45 °
end fillets no

Tube elbow STL file 45° ⌀OD: 76 mm ⌀ID: 73 mm thickness: 1.5 mm (📦 #3256)

1 object(s) - format STL
Tube elbow STL file 45° ⌀OD: 76 mm ⌀ID: 73 mm thickness: 1.5 mm
3D file of an elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 76 mm and an internal diameter of 73 mm. This results in a tube thickness of 1.5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 76 mm
inner diameter 73 mm
angle 45 °
end fillets yes

Tube elbow STL file 90° ⌀OD: 210 mm ⌀ID: 160 mm thickness: 25 mm (📦 #3287)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 210 mm ⌀ID: 160 mm thickness: 25 mm
3D model of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 210 mm and an internal diameter of 160 mm. This results in a tube thickness of 25 mm.
Parameter Value Unit
outer diameter 210 mm
inner diameter 160 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm (📦 #1353)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 120 mm and an inner diameter of 110 mm. This results in a tube thickness of 5 mm.
Parameter Value Unit
outer diameter 120 mm
inner diameter 110 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 15° ⌀OD: 77 mm ⌀ID: 75 mm thickness: 1 mm (📦 #2278)

1 object(s) - format STL
Pipe elbow STL 3D file 15° ⌀OD: 77 mm ⌀ID: 75 mm thickness: 1 mm
File of a pipe elbow with a 15° angle in STL format. This elbow has an outer diameter of 77 mm and an inner diameter of 75 mm. The tube thickness is therefore 1 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 77 mm
inner diameter 75 mm
angle 15 °
end fillets yes

Tube elbow STL 3D file 90° ⌀OD: 81 mm ⌀ID: 77 mm thickness: 2 mm (📦 #3121)

1 object(s) - format STL
Tube elbow STL 3D file 90° ⌀OD: 81 mm ⌀ID: 77 mm thickness: 2 mm
3D model of a tubing elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 81 mm and an inner diameter of 77 mm. The tube thickness is therefore 2 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 81 mm
inner diameter 77 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm (📦 #1446)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 77 mm. The tube thickness is therefore 1.5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 77 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 76 mm thickness: 2 mm (📦 #2209)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 76 mm thickness: 2 mm
3D model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 80 mm and an internal diameter of 76 mm. The tube thickness is therefore 2 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 76 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm (📦 #1469)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm
Model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 75 mm. The tube thickness is therefore 2.5 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 75 mm
angle 90 °
end fillets yes

Tube elbow STL 3D file 15° ⌀OD: 104 mm ⌀ID: 100 mm thickness: 2 mm (📦 #3254)

1 object(s) - format STL
Tube elbow STL 3D file 15° ⌀OD: 104 mm ⌀ID: 100 mm thickness: 2 mm
3D model of an elbow with a 15° angle in STL format. This elbow features an outer diameter of 104 mm and an inner diameter of 100 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 104 mm
inner diameter 100 mm
angle 15 °
end fillets no

Pipe elbow STL 3D file 35° ⌀OD: 100 mm ⌀ID: 95 mm thickness: 2.5 mm (📦 #2168)

1 object(s) - format STL
Pipe elbow STL 3D file 35° ⌀OD: 100 mm ⌀ID: 95 mm thickness: 2.5 mm
3D model of an elbow with a 35° angle in STL format. This elbow has an external diameter of 100 mm and an internal diameter of 95 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 100 mm
inner diameter 95 mm
angle 35 °
end fillets no