?>

Pipe elbow STL file 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm 📦#1418

STL Download STL
Create a new model:
from scratch search for a model
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 180 mm and an internal diameter of 160 mm. This results in a tube thickness of 10 mm. The ends feature fillets to make it easier to assemble.
Generation date: 2025-08-25
3D Model Pipe elbow STL file 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm

3D model download

Free
  • pipe-elbow-ouD180mm-inD160mm-d_model1418-nb0_dd{id}.stl : 2 Mo
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 180 mm
#2 inner diameter 160 mm
#3 angle 45 °
#4 end fillets yes
illustration of the parameters
Representation of the parameters

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL 3D file 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1417)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 160 mm
inner diameter 155 mm
angle 70 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1549)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 160 mm
inner diameter 155 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 99.8 mm ⌀ID: 97.8 mm thickness: 1 mm (📦 #2100)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 99.8 mm ⌀ID: 97.8 mm thickness: 1 mm
Model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 99.8 mm and an inner diameter of 97.8 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 99.8 mm
inner diameter 97.8 mm
angle 90 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1636)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 90 mm
inner diameter 82 mm
angle 45 °
end fillets yes

Pipe elbow STL file 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm (📦 #1490)

1 object(s) - format STL
Pipe elbow STL file 1° ⌀OD: 123 mm ⌀ID: 120 mm thickness: 1.5 mm
3D file of a pipe elbow with a 1° angle in STL format. This pipe elbow features an outer diameter of 123 mm and an inner diameter of 120 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 123 mm
inner diameter 120 mm
angle 1 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm (📦 #1462)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 85 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 90 mm and an internal diameter of 85 mm. This results in a tube thickness of 2.5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 90 mm
inner diameter 85 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 88 mm ⌀ID: 84 mm thickness: 2 mm (📦 #2387)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 88 mm ⌀ID: 84 mm thickness: 2 mm
3D file of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 88 mm and an internal diameter of 84 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 88 mm
inner diameter 84 mm
angle 90 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 109.5 mm ⌀ID: 102.7 mm thickness: 3.4 mm (📦 #2085)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 109.5 mm ⌀ID: 102.7 mm thickness: 3.4 mm
3D file of an elbow with a 45° angle in STL format. This elbow features an external diameter of 109.5 mm and an internal diameter of 102.7 mm. This results in a tube thickness of 3.4 mm.
Parameter Value Unit
outer diameter 109.5 mm
inner diameter 102.7 mm
angle 45 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm (📦 #1353)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 120 mm ⌀ID: 110 mm thickness: 5 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 120 mm and an inner diameter of 110 mm. This results in a tube thickness of 5 mm.
Parameter Value Unit
outer diameter 120 mm
inner diameter 110 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 78 mm ⌀ID: 76 mm thickness: 1 mm (📦 #2246)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 78 mm ⌀ID: 76 mm thickness: 1 mm
Model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 78 mm and an internal diameter of 76 mm. The tube thickness is therefore 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 78 mm
inner diameter 76 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 15° ⌀OD: 77 mm ⌀ID: 75 mm thickness: 1 mm (📦 #2278)

1 object(s) - format STL
Pipe elbow STL 3D file 15° ⌀OD: 77 mm ⌀ID: 75 mm thickness: 1 mm
File of a pipe elbow with a 15° angle in STL format. This elbow has an outer diameter of 77 mm and an inner diameter of 75 mm. The tube thickness is therefore 1 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 77 mm
inner diameter 75 mm
angle 15 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm (📦 #1446)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 80 mm ⌀ID: 77 mm thickness: 1.5 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 77 mm. The tube thickness is therefore 1.5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 77 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 35° ⌀OD: 100 mm ⌀ID: 95 mm thickness: 2.5 mm (📦 #2168)

1 object(s) - format STL
Pipe elbow STL 3D file 35° ⌀OD: 100 mm ⌀ID: 95 mm thickness: 2.5 mm
3D model of an elbow with a 35° angle in STL format. This elbow has an external diameter of 100 mm and an internal diameter of 95 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 100 mm
inner diameter 95 mm
angle 35 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 76 mm thickness: 2 mm (📦 #2209)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 76 mm thickness: 2 mm
3D model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 80 mm and an internal diameter of 76 mm. The tube thickness is therefore 2 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 76 mm
angle 90 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm (📦 #1469)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 80 mm ⌀ID: 75 mm thickness: 2.5 mm
Model of an elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 80 mm and an internal diameter of 75 mm. The tube thickness is therefore 2.5 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 80 mm
inner diameter 75 mm
angle 90 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 76.2 mm ⌀ID: 60 mm thickness: 8.1 mm (📦 #2077)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 76.2 mm ⌀ID: 60 mm thickness: 8.1 mm
Model of an elbow with a 45° angle in STL format. This elbow has an outer diameter of 76.2 mm and an inner diameter of 60 mm. This results in a tube thickness of 8.1 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 76.2 mm
inner diameter 60 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 98 mm ⌀ID: 94 mm thickness: 2 mm (📦 #2099)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 98 mm ⌀ID: 94 mm thickness: 2 mm
File of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 98 mm and an inner diameter of 94 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 98 mm
inner diameter 94 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 88.9 mm ⌀ID: 44 mm thickness: 22.45 mm (📦 #2074)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 88.9 mm ⌀ID: 44 mm thickness: 22.45 mm
Model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an outer diameter of 88.9 mm and an inner diameter of 44 mm. The tube thickness is therefore 22.45 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 88.9 mm
inner diameter 44 mm
angle 45 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm (📦 #2174)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm
File of an elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 70 mm and an internal diameter of 60 mm. The tube thickness is therefore 5 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 70 mm
inner diameter 60 mm
angle 45 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm (📦 #1425)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm
File of an elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 250 mm and an inner diameter of 240 mm. The tube thickness is therefore 5 mm.
Parameter Value Unit
outer diameter 250 mm
inner diameter 240 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1370)

1 object(s) - format STL (5.0/5) 1 vote(s)
Pipe elbow STL 3D file 45° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an outer diameter of 90 mm and an inner diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter 90 mm
inner diameter 82 mm
angle 45 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm (📦 #2175)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 70 mm ⌀ID: 60 mm thickness: 5 mm
3D file of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 70 mm and an internal diameter of 60 mm. This results in a tube thickness of 5 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 70 mm
inner diameter 60 mm
angle 90 °
end fillets yes

Pipe elbow STL file 1° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1706)

1 object(s) - format STL
Pipe elbow STL file 1° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
Model of a pipe elbow with a 1° angle in STL format. This elbow features an outer diameter of 90 mm and an inner diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter 90 mm
inner diameter 82 mm
angle 1 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm (📦 #1445)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 90 mm ⌀ID: 82 mm thickness: 4 mm
3D model of an elbow with a 90° angle in STL format. This elbow has an external diameter of 90 mm and an internal diameter of 82 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter 90 mm
inner diameter 82 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 64 mm ⌀ID: 58 mm thickness: 3 mm (📦 #2431)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 64 mm ⌀ID: 58 mm thickness: 3 mm
File of a pipe elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 64 mm and an internal diameter of 58 mm. This results in a tube thickness of 3 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 64 mm
inner diameter 58 mm
angle 90 °
end fillets yes

Pipe elbow STL 3D file 150° ⌀OD: 89 mm ⌀ID: 85 mm thickness: 2 mm (📦 #1850)

1 object(s) - format STL
Pipe elbow STL 3D file 150° ⌀OD: 89 mm ⌀ID: 85 mm thickness: 2 mm
Model of an elbow with a 150° angle in STL format. This pipe elbow features an external diameter of 89 mm and an internal diameter of 85 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 89 mm
inner diameter 85 mm
angle 150 °
end fillets yes

Pipe elbow STL 3D file 45° ⌀OD: 76.2 mm ⌀ID: 34 mm thickness: 21.1 mm (📦 #2075)

1 object(s) - format STL
Pipe elbow STL 3D file 45° ⌀OD: 76.2 mm ⌀ID: 34 mm thickness: 21.1 mm
3D file of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 76.2 mm and an internal diameter of 34 mm. This results in a tube thickness of 21.1 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 76.2 mm
inner diameter 34 mm
angle 45 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 81 mm ⌀ID: 80 mm thickness: 0.5 mm (📦 #2373)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 81 mm ⌀ID: 80 mm thickness: 0.5 mm
File of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 81 mm and an inner diameter of 80 mm. The tube thickness is therefore 0.5 mm.
Parameter Value Unit
outer diameter 81 mm
inner diameter 80 mm
angle 90 °
end fillets no

Pipe elbow STL file 80° ⌀OD: 57.2 mm ⌀ID: 49.2 mm thickness: 4 mm (📦 #2147)

1 object(s) - format STL
Pipe elbow STL file 80° ⌀OD: 57.2 mm ⌀ID: 49.2 mm thickness: 4 mm
File of a pipe elbow with an 80° angle in STL format. This elbow has an external diameter of 57.2 mm and an internal diameter of 49.2 mm. The tube thickness is therefore 4 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 57.2 mm
inner diameter 49.2 mm
angle 80 °
end fillets yes