Custom Pipe elbow STL file 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm 📦#1425

STL Download STL 4
Create a new model easy
from scratch search for a model
File of an elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 250 mm and an inner diameter of 240 mm. The tube thickness is therefore 5 mm.
Generation date: 2025-08-26
3D Model Pipe elbow STL file 90° ⌀OD: 250 mm ⌀ID: 240 mm thickness: 5 mm

3D model download

Free
  • pipe-elbow-ouD250mm-inD240mm-d_model1425-nb0_dd{id}.stl : 861.4 Ko
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 250 mm (≃9.84 in)
#2 inner diameter 240 mm (≃9 7/16 in)
#3 angle 90 °
#4 end fillets no
Metadata Value
Tube wall thickness 5 mm (≃3/16 in)
illustration of the parameters
Parameter overview

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL file 90° ⌀OD: 210 mm ⌀ID: 200 mm thickness: 5 mm (📦 #5390)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 210 mm ⌀ID: 200 mm thickness: 5 mm
Model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 210 mm and an internal diameter of 200 mm. This results in a tube thickness of 5 mm.
Parameter Value Unit
outer diameter 210 mm
inner diameter 200 mm
angle 90 °
end fillets no

Tube elbow STL file 45° ⌀OD: 230 mm ⌀ID: 210 mm thickness: 10 mm (📦 #7716)

1 object(s) - format STL
Tube elbow STL file 45° ⌀OD: 230 mm ⌀ID: 210 mm thickness: 10 mm
3D model of an elbow with a 45° angle in STL format. This elbow has an external diameter of 230 mm and an internal diameter of 210 mm. The tube thickness is therefore 10 mm.
Parameter Value Unit
outer diameter 230 mm
inner diameter 210 mm
angle 45 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm (📦 #1611)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an external diameter of 300 mm and an internal diameter of 280 mm. The tube thickness is therefore 10 mm.
Parameter Value Unit
outer diameter 300 mm
inner diameter 280 mm
angle 90 °
end fillets no

Tube elbow STL 3D file 90° ⌀OD: 200 mm ⌀ID: 196 mm thickness: 2 mm (📦 #8010)

1 object(s) - format STL
Tube elbow STL 3D file 90° ⌀OD: 200 mm ⌀ID: 196 mm thickness: 2 mm
File of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 200 mm and an inner diameter of 196 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 200 mm
inner diameter 196 mm
angle 90 °
end fillets no

Tube elbow STL file 90° ⌀OD: 210 mm ⌀ID: 160 mm thickness: 25 mm (📦 #3287)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 210 mm ⌀ID: 160 mm thickness: 25 mm
3D model of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 210 mm and an internal diameter of 160 mm. This results in a tube thickness of 25 mm.
Parameter Value Unit
outer diameter 210 mm
inner diameter 160 mm
angle 90 °
end fillets no

Tube elbow STL file 90° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm (📦 #3116)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm
3D model of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 181 mm and an inner diameter of 176 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 181 mm
inner diameter 176 mm
angle 90 °
end fillets no

Tube elbow STL file 45° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm (📦 #3114)

1 object(s) - format STL
Tube elbow STL file 45° ⌀OD: 181 mm ⌀ID: 176 mm thickness: 2.5 mm
3D file of a pipe elbow with a 45° angle in STL format. This elbow has an external diameter of 181 mm and an internal diameter of 176 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 181 mm
inner diameter 176 mm
angle 45 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm (📦 #1612)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 300 mm ⌀ID: 280 mm thickness: 10 mm
Model of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 300 mm and an inner diameter of 280 mm. The tube thickness is therefore 10 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 300 mm
inner diameter 280 mm
angle 90 °
end fillets yes

Tubing elbow STL file 90° ⌀OD: 200 mm ⌀ID: 198.2 mm thickness: 0.90000000000001 mm (📦 #8075)

1 object(s) - format STL
Tubing elbow STL file 90° ⌀OD: 200 mm ⌀ID: 198.2 mm thickness: 0.90000000000001 mm
3D model of a tubing elbow with a 90° angle in STL format. This elbow has an outer diameter of 200 mm and an inner diameter of 198.2 mm. The tube thickness is therefore 0.90000000000001 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 200 mm
inner diameter 198.2 mm
angle 90 °
end fillets yes

Tube elbow STL 3D file 57° ⌀OD: 200 mm ⌀ID: 198 mm thickness: 1 mm (📦 #7162)

1 object(s) - format STL
Tube elbow STL 3D file 57° ⌀OD: 200 mm ⌀ID: 198 mm thickness: 1 mm
3D model of a tubing elbow with a 57° angle in STL format. This pipe elbow features an external diameter of 200 mm and an internal diameter of 198 mm. The tube thickness is therefore 1 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 200 mm
inner diameter 198 mm
angle 57 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1549)

1 object(s) - format STL (5.0/5) 1 vote(s)
Pipe elbow STL file 90° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 160 mm
inner diameter 155 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm (📦 #1417)

1 object(s) - format STL
Pipe elbow STL 3D file 70° ⌀OD: 160 mm ⌀ID: 155 mm thickness: 2.5 mm
File of an elbow with a 70° angle in STL format. This pipe elbow features an outer diameter of 160 mm and an inner diameter of 155 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 160 mm
inner diameter 155 mm
angle 70 °
end fillets no

Tube elbow STL file 90° ⌀OD: 156 mm ⌀ID: 150 mm thickness: 3 mm (📦 #4078)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 156 mm ⌀ID: 150 mm thickness: 3 mm
3D model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 156 mm and an internal diameter of 150 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 156 mm
inner diameter 150 mm
angle 90 °
end fillets no

Tubing elbow STL file 90° ⌀OD: 153 mm ⌀ID: 150 mm thickness: 1.5 mm (📦 #9479)

1 object(s) - format STL
Tubing elbow STL file 90° ⌀OD: 153 mm ⌀ID: 150 mm thickness: 1.5 mm
Model of an elbow with a 90° angle in STL format. This elbow features an outer diameter of 153 mm and an inner diameter of 150 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 153 mm
inner diameter 150 mm
angle 90 °
end fillets no

Tube elbow STL 3D file 45° ⌀OD: 180 mm ⌀ID: 177 mm thickness: 1.5 mm (📦 #3163)

1 object(s) - format STL
Tube elbow STL 3D file 45° ⌀OD: 180 mm ⌀ID: 177 mm thickness: 1.5 mm
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow has an external diameter of 180 mm and an internal diameter of 177 mm. This results in a tube thickness of 1.5 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 180 mm
inner diameter 177 mm
angle 45 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 144 mm ⌀ID: 141 mm thickness: 1.5 mm (📦 #9480)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 144 mm ⌀ID: 141 mm thickness: 1.5 mm
Model of an elbow with a 90° angle in STL format. This elbow features an external diameter of 144 mm and an internal diameter of 141 mm. This results in a tube thickness of 1.5 mm.
Parameter Value Unit
outer diameter 144 mm
inner diameter 141 mm
angle 90 °
end fillets no

Tube elbow STL file 30° ⌀OD: 154 mm ⌀ID: 150 mm thickness: 2 mm (📦 #9728)

1 object(s) - format STL
Tube elbow STL file 30° ⌀OD: 154 mm ⌀ID: 150 mm thickness: 2 mm
3D file of a pipe elbow with a 30° angle in STL format. This pipe elbow features an outer diameter of 154 mm and an inner diameter of 150 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 154 mm
inner diameter 150 mm
angle 30 °
end fillets no

Pipe elbow STL file 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm (📦 #1418)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 180 mm ⌀ID: 160 mm thickness: 10 mm
3D model of a pipe elbow with a 45° angle in STL format. This pipe elbow features an external diameter of 180 mm and an internal diameter of 160 mm. This results in a tube thickness of 10 mm. The ends feature fillets to make it easier to assemble.
Parameter Value Unit
outer diameter 180 mm
inner diameter 160 mm
angle 45 °
end fillets yes

Pipe elbow STL file 60° ⌀OD: 142 mm ⌀ID: 132 mm thickness: 5 mm (📦 #9938)

1 object(s) - format STL
Pipe elbow STL file 60° ⌀OD: 142 mm ⌀ID: 132 mm thickness: 5 mm
3D file of an elbow with a 60° angle in STL format. This elbow features an outer diameter of 142 mm and an inner diameter of 132 mm. The tube thickness is therefore 5 mm.
Parameter Value Unit
outer diameter 142 mm
inner diameter 132 mm
angle 60 °
end fillets no

Tube elbow STL file 90° ⌀OD: 157.3 mm ⌀ID: 154.3 mm thickness: 1.5 mm (📦 #10186)

1 object(s) - format STL
Tube elbow STL file 90° ⌀OD: 157.3 mm ⌀ID: 154.3 mm thickness: 1.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 157.3 mm and an inner diameter of 154.3 mm. The tube thickness is therefore 1.5 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 157.3 mm
inner diameter 154.3 mm
angle 90 °
end fillets yes

Pipe elbow STL file 45° ⌀OD: 165 mm ⌀ID: 160 mm thickness: 2.5 mm (📦 #6426)

1 object(s) - format STL
Pipe elbow STL file 45° ⌀OD: 165 mm ⌀ID: 160 mm thickness: 2.5 mm
3D model of an elbow with a 45° angle in STL format. This elbow features an external diameter of 165 mm and an internal diameter of 160 mm. This results in a tube thickness of 2.5 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 165 mm
inner diameter 160 mm
angle 45 °
end fillets yes

Tubing elbow STL file 90° ⌀OD: 135 mm ⌀ID: 132 mm thickness: 1.5 mm (📦 #8607)

1 object(s) - format STL
Tubing elbow STL file 90° ⌀OD: 135 mm ⌀ID: 132 mm thickness: 1.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow has an external diameter of 135 mm and an internal diameter of 132 mm. This results in a tube thickness of 1.5 mm.
Parameter Value Unit
outer diameter 135 mm
inner diameter 132 mm
angle 90 °
end fillets no

Tube elbow STL file 120° ⌀OD: 140 mm ⌀ID: 132 mm thickness: 4 mm (📦 #9937)

1 object(s) - format STL
Tube elbow STL file 120° ⌀OD: 140 mm ⌀ID: 132 mm thickness: 4 mm
File of a tubing elbow with a 120° angle in STL format. This pipe elbow has an outer diameter of 140 mm and an inner diameter of 132 mm. This results in a tube thickness of 4 mm.
Parameter Value Unit
outer diameter 140 mm
inner diameter 132 mm
angle 120 °
end fillets no

Pipe elbow STL file 70° ⌀OD: 155 mm ⌀ID: 153 mm thickness: 1 mm (📦 #4992)

1 object(s) - format STL
Pipe elbow STL file 70° ⌀OD: 155 mm ⌀ID: 153 mm thickness: 1 mm
Model of a pipe elbow with a 70° angle in STL format. This elbow features an outer diameter of 155 mm and an inner diameter of 153 mm. The tube thickness is therefore 1 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 155 mm
inner diameter 153 mm
angle 70 °
end fillets yes

Tubing elbow STL file 90° ⌀OD: 154 mm ⌀ID: 150 mm thickness: 2 mm (📦 #4366)

1 object(s) - format STL
Tubing elbow STL file 90° ⌀OD: 154 mm ⌀ID: 150 mm thickness: 2 mm
3D file of a tubing elbow with a 90° angle in STL format. This elbow features an outer diameter of 154 mm and an inner diameter of 150 mm. This results in a tube thickness of 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 154 mm
inner diameter 150 mm
angle 90 °
end fillets yes