Tube adapter STL file ⌀ 92–71 mm (Length: 90 mm) 📦#1371
Generation date: 2025-08-18



3D model download
Free- inline-tube-adapter-lenA10mm-d_model1371-nb0_dd{id}.stl : 3.2 Mo
STL
Mesh quality :
0.05
0.05


(attribution - commercial use allowed)
Safe download
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
Parameter | Value | |
---|---|---|
#1 | side A length | 10 mm |
#2 | side A outer diameter | 92 mm |
#3 | side A thickness | 3 mm |
#4 | side B length | 50 mm |
#5 | side B outer diameter | 71 mm |
#6 | side B thickness | 2 mm |
#7 | transition length | 30 mm |
#8 | axis offset | 9.1 mm |
#9 | ends fillet | no fillet |

Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
Parameter | Label |
---|---|
#1 side A length | lenA |
#2 side A outer diameter | diA |
#3 side A thickness | thA |
#4 side B length | lenB |
#5 side B outer diameter | diB |
#6 side B thickness | thB |
#7 transition length | tra |
#8 axis offset | ofs |
#9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter STL 3D file ⌀ 90–68 mm (Length: 90 mm) (📦 #1188)
1 object(s) - format STL
Tube connector ⌀90 mm to ⌀68 mm in STL 3D format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 10 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 15 | mm |
side A outer diameter | 90 | mm |
side A thickness | 2 | mm |
side B length | 30 | mm |
side B outer diameter | 68 | mm |
side B thickness | 2 | mm |
transition length | 45 | mm |
axis offset | 10 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Straight tube fitting ⌀85 mm to ⌀70 mm in STL 3D format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 7.4 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 85 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 70 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 7.4 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 80 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 70 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 4.9 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 70–42 mm (Length: 87 mm) (📦 #1900)
1 object(s) - format STL
Inline fitting ⌀70 mm to ⌀42 mm in STL 3D format. Final length of this reducer is 87 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 27 mm, the smaller one of 40 mm. The axes of the tubes are off-center by 13.8 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 27 | mm |
side A outer diameter | 70 | mm |
side A thickness | 3 | mm |
side B length | 40 | mm |
side B outer diameter | 42 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 13.8 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 94–60 mm (Length: 80 mm) (📦 #1685)
1 object(s) - format STL
Straight sleeve ⌀94 mm to ⌀60 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 15 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 94 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 60 | mm |
side B thickness | 2 | mm |
transition length | 40 | mm |
axis offset | 15 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 94–80 mm (Length: 80 mm) (📦 #1928)
1 object(s) - format STL
Inline sleeve ⌀94 mm to ⌀80 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The axes of the tubes are off-center by 5.9 mm. The ends are rounded on the outside.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 94 | mm |
side A thickness | 2 | mm |
side B length | 50 | mm |
side B outer diameter | 80 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 5.9 | mm |
ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 70–42 mm (Length: 80 mm) (📦 #1901)
1 object(s) - format STL
Inline tube junction ⌀70 mm to ⌀42 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are offset by 13.8 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 70 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 42 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 13.8 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)
1 object(s) - format STL (4.0/5) 1 vote(s)
Straight sleeve ⌀102 mm to ⌀90 mm in STL 3D format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The two axes of the tubes are offset by 5.9 mm. The ends feature an external fillet to ease the connection.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 102 | mm |
side A thickness | 2 | mm |
side B length | 50 | mm |
side B outer diameter | 90 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 5.9 | mm |
ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 110–80 mm (Length: 78 mm) (📦 #2413)
1 object(s) - format STL
Tube reducer ⌀110 mm to ⌀80 mm in STL format. Final length of this sleeve is 78 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 25 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 40 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 110 | mm |
side A thickness | 4 | mm |
side B length | 40 | mm |
side B outer diameter | 80 | mm |
side B thickness | 2 | mm |
transition length | 13 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm) (📦 #2254)
1 object(s) - format STL
Straight tube adapter ⌀70 mm to ⌀62 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 70 | mm |
side A thickness | 2 | mm |
side B length | 50 | mm |
side B outer diameter | 62 | mm |
side B thickness | 2 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)
1 object(s) - format STL
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 86 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 66 | mm |
side B thickness | 2 | mm |
transition length | 30 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 80 | mm |
side A thickness | 2.5 | mm |
side B length | 30 | mm |
side B outer diameter | 50 | mm |
side B thickness | 2.5 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)
1 object(s) - format STL (5.0/5) 1 vote(s)
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 80 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 50 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)
1 object(s) - format STL
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 76 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 50 | mm |
side B thickness | 3 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 55–50 mm (Length: 75 mm) (📦 #2339)
1 object(s) - format STL
Straight tube coupler ⌀55 mm to ⌀50 mm in STL 3D format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 55 | mm |
side A thickness | 2.5 | mm |
side B length | 50 | mm |
side B outer diameter | 50 | mm |
side B thickness | 2.5 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm) (📦 #1882)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 80 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 60 | mm |
side B thickness | 2 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 100–60 mm (Length: 70 mm) (📦 #1115)
1 object(s) - format STL (4.9/5) 7 vote(s)
Straight tube adapter ⌀100 mm to ⌀60 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to make tube connection easier.
Parameter | Value | Unit |
---|---|---|
side A length | 10 | mm |
side A outer diameter | 100 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 60 | mm |
side B thickness | 2 | mm |
transition length | 40 | mm |
axis offset | 15 | mm |
ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 60–48 mm (Length: 45 mm) (📦 #1973)
1 object(s) - format STL
Inline tube adapter ⌀60 mm to ⌀48 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 10 | mm |
side A outer diameter | 60 | mm |
side A thickness | 3 | mm |
side B length | 20 | mm |
side B outer diameter | 48 | mm |
side B thickness | 3 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 116–100 mm (Length: 90 mm) (📦 #2153)
1 object(s) - format STL
Straight tube fitting ⌀116 mm to ⌀100 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 116 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 100 | mm |
side B thickness | 3 | mm |
transition length | 30 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 85–60 mm (Length: 45 mm) (📦 #1165)
1 object(s) - format STL
Tube coupler ⌀85 mm to ⌀60 mm in STL format. Final length of this connector is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 85 | mm |
side A thickness | 3 | mm |
side B length | 20 | mm |
side B outer diameter | 60 | mm |
side B thickness | 3 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)
1 object(s) - format STL
Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 100 | mm |
side A thickness | 2.5 | mm |
side B length | 30 | mm |
side B outer diameter | 40 | mm |
side B thickness | 2.5 | mm |
transition length | 20 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 54–45 mm (Length: 75 mm) (📦 #2338)
1 object(s) - format STL
Tube fitting ⌀54 mm to ⌀45 mm in STL format. Total length of this reducer is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 54 | mm |
side A thickness | 2.5 | mm |
side B length | 50 | mm |
side B outer diameter | 45 | mm |
side B thickness | 2.5 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 94–80 mm (Length: 50 mm) (📦 #1929)
1 object(s) - format STL
Tube reducer ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 5.9 mm. The ends feature an external fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 94 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 80 | mm |
side B thickness | 2 | mm |
transition length | 10 | mm |
axis offset | 5.9 | mm |
ends fillet | fillet on th... |
Tube adapter STL file ⌀ 52–45 mm (Length: 75 mm) (📦 #2154)
1 object(s) - format STL
Inline fitting ⌀52 mm to ⌀45 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 52 | mm |
side A thickness | 2.5 | mm |
side B length | 50 | mm |
side B outer diameter | 45 | mm |
side B thickness | 2.5 | mm |
transition length | 5 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)
1 object(s) - format STL
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 120 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 60 | mm |
side B thickness | 2 | mm |
transition length | 40 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) (📦 #1440)
1 object(s) - format STL
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
Parameter | Value | Unit |
---|---|---|
side A length | 25 | mm |
side A outer diameter | 81 | mm |
side A thickness | 2.5 | mm |
side B length | 25 | mm |
side B outer diameter | 55 | mm |
side B thickness | 2.5 | mm |
transition length | 30 | mm |
axis offset | 0 | mm |
ends fillet | fillet on th... |
Tube adapter STL 3D file ⌀ 125–100 mm (Length: 70 mm) (📦 #1883)
1 object(s) - format STL
Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 125 | mm |
side A thickness | 2 | mm |
side B length | 25 | mm |
side B outer diameter | 100 | mm |
side B thickness | 2 | mm |
transition length | 25 | mm |
axis offset | 1 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 75–50 mm (Length: 100 mm) (📦 #1238)
1 object(s) - format STL
Tube fitting ⌀75 mm to ⌀50 mm in STL format. Total length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 12.4 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 75 | mm |
side A thickness | 2 | mm |
side B length | 20 | mm |
side B outer diameter | 50 | mm |
side B thickness | 2 | mm |
transition length | 60 | mm |
axis offset | 12.4 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 130–100 mm (Length: 70 mm) (📦 #1996)
1 object(s) - format STL
Tube connector ⌀130 mm to ⌀100 mm in STL format. Final length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are offset by 1 mm. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 20 | mm |
side A outer diameter | 130 | mm |
side A thickness | 2 | mm |
side B length | 25 | mm |
side B outer diameter | 100 | mm |
side B thickness | 2 | mm |
transition length | 25 | mm |
axis offset | 1 | mm |
ends fillet | no fillet |
Tube adapter STL 3D file ⌀ 60–45 mm (Length: 75 mm) (📦 #1234)
1 object(s) - format STL
Diameter adapter ⌀60 mm to ⌀45 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter | Value | Unit |
---|---|---|
side A length | 30 | mm |
side A outer diameter | 60 | mm |
side A thickness | 3 | mm |
side B length | 30 | mm |
side B outer diameter | 45 | mm |
side B thickness | 3 | mm |
transition length | 15 | mm |
axis offset | 0 | mm |
ends fillet | no fillet |