Inline tube adapter 3D Files - Side A outer diameter 200 to 250 mm | page 3

Straight tubing adapter ⌀230 mm to ⌀210 mm in STL format. Total length of this reducer is 20 mm. The thickness of the tubes is identical: 20 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are raw.

Tube reducer ⌀230 mm to ⌀8 mm in STL format. Total length of this connector is 44 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 24 mm, the smaller one of 15 mm. The axes of the tubes are offset by 80 mm. The ends are not rounded.

Straight tube reducer ⌀230 mm to ⌀12 mm in STL 3D format. Length of this adapter is 47 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 24 mm, the smaller one of 18 mm. The two axes of the tubes are offset by 65 mm. The ends have a fillet to make tube connection easier.

Straight tube fitting ⌀230 mm to ⌀18 mm in STL format. Final length of this sleeve is 51 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 22 mm, the smaller one of 24 mm. The two axes of the tubes are off-center by 65 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Diameter adapter ⌀230 mm to ⌀24 mm in STL 3D format. Length of this connector is 52 mm. The larger-diameter tube has a thickness of 3 mm and a length of 23 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 24 mm. The two axes of the tubes are off-center by 70 mm. The ends are rounded.

Tube reducer ⌀235 mm to ⌀210 mm in STL format. Total length of this adapter is 20 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 5 mm. The ends are not rounded.

Straight tube connector ⌀240 mm to ⌀106 mm in STL format. Length of this fitting is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 70 mm as well. The ends are raw.

Inline tube junction ⌀245 mm to ⌀106 mm in STL format. Final length of this reducer is 145 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 5 mm. The ends have no fillet.

Straight tube connector ⌀245 mm to ⌀106 mm in STL format. Final length of this sleeve is 145 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 70 mm as well. The ends are raw.

Tube coupler ⌀245 mm to ⌀210 mm in STL format. Final length of this coupler is 15 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 5 mm as well. The ends are not rounded.

Inline tubing adapter ⌀245 mm to ⌀210 mm in STL format. Total length of this fitting is 15 mm. The thickness of the tubes is identical: 12 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 5 mm as well. The ends are raw.