Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 7

Inline tube adapter ⌀195 mm to ⌀130 mm in STL format. Length of this connector is 190 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 80 mm, the smaller one of 50 mm. The axes of the tubes are offset by 25.4 mm. The ends are rounded to make tube connection easier.

Diameter adapter ⌀195 mm to ⌀127 mm in STL format. Total length of this junction is 90 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tube coupler ⌀196 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.0 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 34 mm. The ends are raw.

Inline fitting ⌀198 mm to ⌀56 mm in STL 3D format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Inline tubing adapter ⌀198 mm to ⌀154 mm in STL 3D format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Straight tube fitting ⌀198 mm to ⌀153 mm in STL format. Total length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The ends are not rounded.

Tube coupler ⌀198 mm to ⌀105 mm in STL format. Final length of this reducer is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 20 mm. The ends feature an internal fillet.

Tube reducer ⌀198 mm to ⌀197 mm in STL 3D format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Inline fitting ⌀198 mm to ⌀139 mm in STL format. Final length of this coupler is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.

Straight sleeve ⌀198 mm to ⌀145 mm in STL format. Total length of this junction is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.

Straight tube fitting ⌀198 mm to ⌀138 mm in STL 3D format. Final length of this junction is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.

Straight tube adapter ⌀198 mm to ⌀148 mm in STL 3D format. Final length of this sleeve is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are raw.

Inline tube junction ⌀198 mm to ⌀150 mm in STL format. Final length of this connector is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Tubing adapter ⌀199 mm to ⌀141 mm in STL 3D format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The two axes of the tubes are off-center by 14 mm. The ends have no fillet.

Tubing reducer ⌀199 mm to ⌀149 mm in STL format. Total length of this coupler is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.