Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 4

Straight tube coupler ⌀155 mm to ⌀90 mm in STL 3D format. Total length of this connector is 160 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The two axes of the tubes are off-center by 25.4 mm. The ends are not rounded.

Straight tube adapter ⌀155 mm to ⌀90 mm in STL 3D format. Length of this coupler is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 25.4 mm. The ends have no fillet.

Tubing adapter ⌀155 mm to ⌀90 mm in STL 3D format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The axes of the tubes are off-center by 25.4 mm. The ends have no fillet.

Inline tube junction ⌀155 mm to ⌀103 mm in STL format. Final length of this reducer is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 25.4 mm. The ends have a fillet to facilitate the connection of the two tubes.

Tubing reducer ⌀155 mm to ⌀103 mm in STL 3D format. Length of this reducer is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are rounded to make tube connection easier.

Inline tubing adapter ⌀155 mm to ⌀105 mm in STL 3D format. Final length of this coupler is 205 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 40 mm. The two axes of the tubes are off-center by 23.9 mm. The ends feature a fillet to make tube connection easier.

Tube connector ⌀155 mm to ⌀130 mm in STL format. Final length of this connector is 85 mm. The larger-diameter tube has a thickness of 2 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.

Tube junction ⌀155 mm to ⌀130 mm in STL format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.

Tube fitting ⌀155 mm to ⌀129 mm in STL 3D format. Length of this connector is 85 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube adapter ⌀155 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 30 mm. The ends are raw.

Tube adapter ⌀155 mm to ⌀93 mm in STL format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 40 mm. The ends are rounded on the inside to facilitate the connection of the two tubes.

Straight tube connector ⌀155 mm to ⌀135 mm in STL format. Length of this adapter is 95 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 30 mm. The ends are rounded on the inside to make tube connection easier.

Tube coupler ⌀156 mm to ⌀98 mm in STL format. Final length of this fitting is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube junction ⌀156 mm to ⌀100 mm in STL format. Total length of this fitting is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline tube reducer ⌀156 mm to ⌀101 mm in STL 3D format. Length of this sleeve is 250 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 150 mm. The ends are raw.

Straight tube coupler ⌀156 mm to ⌀99 mm in STL 3D format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Straight tube fitting ⌀156 mm to ⌀100 mm in STL 3D format. Final length of this adapter is 208 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 23 mm, the smaller one of 35 mm. The axes of the tubes are off-center by 22 mm. The ends have no fillet.

Tube connector ⌀156 mm to ⌀100 mm in STL 3D format. Final length of this sleeve is 208 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 23 mm, the smaller one of 35 mm. The two axes of the tubes are offset by 27.9 mm. The ends have no fillet.

Inline fitting ⌀156 mm to ⌀149 mm in STL format. Total length of this coupler is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Tube connector ⌀157 mm to ⌀117 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight sleeve ⌀157 mm to ⌀100 mm in STL 3D format. Final length of this sleeve is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.

Tubing adapter ⌀157 mm to ⌀123 mm in STL format. Length of this junction is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 50 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Tube fitting ⌀157 mm to ⌀125 mm in STL format. Length of this sleeve is 124 mm. The larger-diameter tube has a thickness of 3 mm and a length of 50 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 49 mm. The ends have no fillet.

Tube fitting ⌀157 mm to ⌀128 mm in STL format. Final length of this junction is 85 mm. The larger-diameter tube has a thickness of 2 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.

Tube adapter ⌀158 mm to ⌀118 mm in STL format. Final length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline fitting ⌀158 mm to ⌀118 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Diameter adapter ⌀158 mm to ⌀96 mm in STL 3D format. Total length of this junction is 152 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Inline tube adapter ⌀158 mm to ⌀148 mm in STL 3D format. Final length of this sleeve is 135 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 50 mm. The ends are raw.

Straight tube fitting ⌀158 mm to ⌀157 mm in STL 3D format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tubing adapter ⌀158 mm to ⌀99 mm in STL format. Total length of this junction is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.