Round air vent grill 3D Files - Male diameter 150 to 200 mm | page 1

Model(s) 1 to 30 of 49

Round air vent STL file ∅ 150 mm, slat angle: 10° with central reinforcement (📦 #1281)

1 object(s) - format STL (4.3/5) 4 vote(s)
Round air vent STL file ∅ 150 mm, slat angle: 10° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its male diameter measures 150 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This aeration grille has a flange of 10 mm. The total diameter of the model is 170 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 150 mm, slat angle: 45° (📦 #1287)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 45°
3D design of a round air vent for air circulation in STL format. Its male diameter is 150 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent cover features a thin flange of 5 mm. The full diameter of the model is 160 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #1322)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement
3D design of a round vent cover for ventilation in STL format. Its male diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the whole structure. This ventilation grille has a thin flange of 3 mm. The full diameter of this model is 156 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 3 mm
central reinforcement yes

Round air vent STL 3D file ∅ 150 mm, slat angle: 30° (📦 #1707)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 30°
3D model of a round air vent for air circulation in STL format. Its male diameter is 150 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. This aeration grille features a thin flange of 5 mm. The overall diameter of this model is 160 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL 3D file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #2492)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 40° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its insertion diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the slats. This 3D vent grille features a flange of 7 mm. The total diameter of the model is 164 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 7 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement (📦 #2925)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 40° with central reinforcement
3D file of a round air vent for air circulation in STL format. Its male diameter measures 150 mm. The slats have an angle of 40° and a low thickness of 1.6 mm. A central reinforcement secures the whole structure. This aeration grille has a prominent flange of 20 mm. The total diameter of this model is 190 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 40 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 45° with central reinforcement (📦 #3747)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 45° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 150 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the whole structure. This aeration grille features a prominent flange of 20 mm. The full diameter of this model is 190 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 150 mm, slat angle: 44° with central reinforcement (📦 #3920)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 44° with central reinforcement
3D file of a round grille for ventilation in STL format. Its insertion diameter is 150 mm. The slats have an angle of 44° and a high thickness of 2 mm. A central reinforcement secures the whole structure. This 3D aeration grille features a prominent flange of 12 mm. The overall diameter of the model is 174 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 44 °
slat thickness 2 mm
flange width 12 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 10° (📦 #3971)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 10°
Model of a round grille for air circulation in STL format. Its insertion diameter measures 150 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. This vent cover features a collar of 10 mm. The total diameter of the model is 170 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement no

Round air vent STL file ∅ 150 mm, slat angle: 20° (📦 #4091)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 20°
Design of a round vent cover for ventilation in STL format. Its insertion diameter measures 150 mm. The slats have a slight angle of 20° and a low thickness of 1.4 mm. This 3D vent grille has a thin flange of 5 mm. The overall diameter of the model is 160 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 20 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement no

Round air vent STL 3D file ∅ 150 mm, slat angle: 15° with central reinforcement (📦 #4162)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 15° with central reinforcement
3D model of a round air vent for ventilation in STL format. Its insertion diameter is 150 mm. The slats have a slight angle of 15° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the whole structure. This vent cover features a prominent flange of 20 mm. The overall diameter of this model is 190 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 15 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 20° with central reinforcement (📦 #4431)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 20° with central reinforcement
3D file of a round air vent for air circulation in STL format. Its insertion diameter is 150 mm. The slats have a slight angle of 20° and a low thickness of 1.4 mm. A centered vertical reinforcement strengthens the slats. This 3D ventilation grille has a thin flange of 5 mm. The total diameter of this model is 160 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 20 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 150 mm, slat angle: 60° with central reinforcement (📦 #4805)

1 object(s) - format STL
Round air vent STL 3D file ∅ 150 mm, slat angle: 60° with central reinforcement
File of a round vent cover for air circulation in STL format. Its male diameter is 150 mm. The slats have a steep angle of 60° and a high thickness of 2 mm. A centered vertical reinforcement secures the whole structure. This 3D aeration grille has a collar of 10 mm. The overall diameter of this model is 170 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 60 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 30° with central reinforcement (📦 #9691)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 30° with central reinforcement
Design of a round air vent for ventilation in STL format. Its male diameter is 150 mm. The slats have a slight angle of 30° and a low thickness of 1.4 mm. A central reinforcement strengthens the whole structure. This vent cover features a collar of 10 mm. The total diameter of the model is 170 mm.
Parameter Value Unit
male diameter 150 mm
slat angle 30 °
slat thickness 1.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 150 mm, slat angle: 10° with central reinforcement (📦 #9700)

1 object(s) - format STL
Round air vent STL file ∅ 150 mm, slat angle: 10° with central reinforcement
Model of a round vent cover for ventilation in STL format. Its male diameter measures 150 mm. The slats have a slight angle of 10° and a low thickness of 1.4 mm. A central reinforcement secures the slats. This 3D vent cover has no flange.
Parameter Value Unit
male diameter 150 mm
slat angle 10 °
slat thickness 1.4 mm
flange width 0 mm
central reinforcement yes

Round air vent STL 3D file ∅ 152 mm, slat angle: 45° with central reinforcement (📦 #1293)

1 object(s) - format STL (5.0/5) 4 vote(s)
Round air vent STL 3D file ∅ 152 mm, slat angle: 45° with central reinforcement
3D file of a round vent cover for ventilation in STL format. Its male diameter measures 152 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the slats. This 3D vent cover has a thin flange of 3 mm. The overall diameter of this model is 158 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 45 °
slat thickness 2 mm
flange width 3 mm
central reinforcement yes

Round air vent STL file ∅ 152 mm, slat angle: 50° with central reinforcement (📦 #1298)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 50° with central reinforcement
Design of a round vent cover for ventilation in STL format. Its male diameter is 152 mm. The slats have a steep angle of 50° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the whole structure. This vent grille features a thin flange of 3 mm. The total diameter of the model is 158 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 50 °
slat thickness 2 mm
flange width 3 mm
central reinforcement yes

Round air vent STL 3D file ∅ 152 mm, slat angle: 45° (📦 #1335)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL 3D file ∅ 152 mm, slat angle: 45°
Design of a round air vent for ventilation in STL format. Its insertion diameter measures 152 mm. The slats have an angle of 45° and a high thickness of 2 mm. This 3D aeration grille features a thin flange of 3 mm. The overall diameter of this model is 158 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 45 °
slat thickness 2 mm
flange width 3 mm
central reinforcement no

Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement (📦 #1441)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter is 152 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A vertical reinforcement strengthens the whole structure. This vent cover features a thin flange of 5 mm. The overall diameter of this model is 162 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 30 °
slat thickness 2.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement (📦 #1481)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement
File of a round vent cover for air circulation in STL format. Its insertion diameter measures 152 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the whole structure. This 3D aeration grille features a collar of 10 mm. The overall diameter of the model is 172 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 152 mm, slat angle: 60° with central reinforcement (📦 #3690)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 60° with central reinforcement
3D model of a round air vent for air circulation in STL format. Its insertion diameter measures 152 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. A vertical reinforcement secures the whole structure. This aeration grille features no flange.
Parameter Value Unit
male diameter 152 mm
slat angle 60 °
slat thickness 2.4 mm
flange width 0 mm
central reinforcement yes

Round air vent STL file ∅ 152 mm, slat angle: 13° (📦 #3784)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 13°
3D design of a round vent cover for ventilation in STL format. Its male diameter measures 152 mm. The slats have a slight angle of 13° and a low thickness of 1.6 mm. This 3D aeration grille has a thin flange of 5 mm. The full diameter of the model is 162 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 13 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no

Round air vent STL file ∅ 152 mm, slat angle: 60° with central reinforcement (📦 #8286)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 60° with central reinforcement
3D file of a round vent cover for air circulation in STL format. Its insertion diameter measures 152 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. A central reinforcement secures the slats. This 3D vent cover features a prominent flange of 15 mm. The full diameter of this model is 182 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 60 °
slat thickness 2.4 mm
flange width 15 mm
central reinforcement yes

Round air vent STL 3D file ∅ 153.5 mm, slat angle: 10° with central reinforcement (📦 #10122)

1 object(s) - format STL
Round air vent STL 3D file ∅ 153.5 mm, slat angle: 10° with central reinforcement
Model of a round air vent for ventilation in STL format. Its male diameter is 153.5 mm. The slats have a slight angle of 10° and a low thickness of 1.4 mm. A vertical reinforcement reinforces the slats. This vent grille features a thin flange of 2 mm. The overall diameter of this model is 157.5 mm.
Parameter Value Unit
male diameter 153.5 mm
slat angle 10 °
slat thickness 1.4 mm
flange width 2 mm
central reinforcement yes

Round air vent STL file ∅ 153.5 mm, slat angle: 40° with central reinforcement (📦 #10139)

1 object(s) - format STL
Round air vent STL file ∅ 153.5 mm, slat angle: 40° with central reinforcement
3D model of a round grille for air circulation in STL format. Its insertion diameter measures 153.5 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. A vertical reinforcement reinforces the whole structure. This 3D ventilation grille has a thin flange of 2 mm. The overall diameter of the model is 157.5 mm.
Parameter Value Unit
male diameter 153.5 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 2 mm
central reinforcement yes

Round air vent STL 3D file ∅ 153.5 mm, slat angle: 45° with central reinforcement (📦 #10140)

1 object(s) - format STL
Round air vent STL 3D file ∅ 153.5 mm, slat angle: 45° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its insertion diameter measures 153.5 mm. The slats have an angle of 45° and a low thickness of 1.4 mm. A centered vertical reinforcement reinforces the whole structure. This aeration grille has a thin flange of 2 mm. The full diameter of the model is 157.5 mm.
Parameter Value Unit
male diameter 153.5 mm
slat angle 45 °
slat thickness 1.4 mm
flange width 2 mm
central reinforcement yes

Round air vent STL 3D file ∅ 154 mm, slat angle: 45° with central reinforcement (📦 #1887)

1 object(s) - format STL
Round air vent STL 3D file ∅ 154 mm, slat angle: 45° with central reinforcement
Design of a round grille for ventilation in STL format. Its insertion diameter measures 154 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This ventilation grille features a flange of 10 mm. The overall diameter of this model is 174 mm.
Parameter Value Unit
male diameter 154 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 155 mm, slat angle: 45° with central reinforcement (📦 #1416)

1 object(s) - format STL
Round air vent STL file ∅ 155 mm, slat angle: 45° with central reinforcement
Model of a round vent cover for ventilation in STL format. Its male diameter measures 155 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A vertical reinforcement secures the slats. This 3D ventilation grille has a prominent flange of 20 mm. The full diameter of this model is 195 mm.
Parameter Value Unit
male diameter 155 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 155 mm, slat angle: 30° with central reinforcement (📦 #4114)

1 object(s) - format STL
Round air vent STL 3D file ∅ 155 mm, slat angle: 30° with central reinforcement
3D file of a round air vent for air circulation in STL format. Its insertion diameter measures 155 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement strengthens the whole structure. This 3D aeration grille has a prominent flange of 20 mm. The overall diameter of the model is 195 mm.
Parameter Value Unit
male diameter 155 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes

Round air vent STL file ∅ 155 mm, slat angle: 30° with central reinforcement (📦 #7603)

1 object(s) - format STL
Round air vent STL file ∅ 155 mm, slat angle: 30° with central reinforcement
File of a round air vent for air circulation in STL format. Its male diameter measures 155 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A vertical reinforcement reinforces the slats. This 3D vent grille has a thin flange of 5 mm. The overall diameter of the model is 165 mm.
Parameter Value Unit
male diameter 155 mm
slat angle 30 °
slat thickness 2.4 mm
flange width 5 mm
central reinforcement yes
Can't find the right model? Create it with your specs