Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 9

Tubing reducer ⌀120 mm to ⌀32 mm in STL 3D format. Total length of this reducer is 109 mm. The larger-diameter tube has a thickness of 3 mm and a length of 29 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm. The ends have a fillet on the inside.

Straight tube coupler ⌀120 mm to ⌀80 mm in STL 3D format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 20 mm. The ends are not rounded.

Straight tubing adapter ⌀120 mm to ⌀80 mm in STL format. Total length of this adapter is 147 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 70 mm as well. The ends are not rounded.

Inline tubing adapter ⌀120 mm to ⌀56 mm in STL format. Final length of this connector is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 60 mm. The two axes of the tubes are off-center by 6 mm. The ends feature an internal fillet to make tube connection easier.

Tube reducer ⌀120 mm to ⌀56 mm in STL 3D format. Total length of this adapter is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 60 mm. The axes of the tubes are offset by 30 mm. The ends feature an internal fillet to make tube connection easier.

Tube fitting ⌀121 mm to ⌀78 mm in STL format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are offset by 21.4 mm. The ends have a fillet on the outside to ease the connection.

Straight tube adapter ⌀121 mm to ⌀110 mm in STL format. Length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube reducer ⌀122 mm to ⌀78 mm in STL format. Final length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Straight tube coupler ⌀122 mm to ⌀92 mm in STL 3D format. Final length of this adapter is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Tube connector ⌀122 mm to ⌀92 mm in STL format. Length of this fitting is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline sleeve ⌀122 mm to ⌀74 mm in STL 3D format. Total length of this sleeve is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are raw.

Inline sleeve ⌀122 mm to ⌀74 mm in STL 3D format. Final length of this coupler is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are raw.

Diameter adapter ⌀122 mm to ⌀75 mm in STL 3D format. Final length of this adapter is 30 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are off-center by 23.4 mm. The ends are raw.

Straight tube connector ⌀122 mm to ⌀81 mm in STL 3D format. Final length of this reducer is 67 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube fitting ⌀123 mm to ⌀58 mm in STL format. Length of this sleeve is 85 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends are not rounded.

Inline tube junction ⌀123 mm to ⌀58 mm in STL 3D format. Final length of this junction is 70 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends feature a fillet to make tube connection easier.

Straight tube adapter ⌀123 mm to ⌀58 mm in STL format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Inline tube junction ⌀123 mm to ⌀93 mm in STL 3D format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 24 mm. The ends are raw.

Tube coupler ⌀123 mm to ⌀94 mm in STL format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 24 mm. The ends are raw.

Tube fitting ⌀123 mm to ⌀92 mm in STL 3D format. Length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tube reducer ⌀123 mm to ⌀93 mm in STL format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Inline fitting ⌀123 mm to ⌀92 mm in STL format. Length of this fitting is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Straight tubing adapter ⌀123 mm to ⌀110 mm in STL 3D format. Final length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Straight sleeve ⌀124 mm to ⌀103 mm in STL format. Total length of this coupler is 120 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded to make tube connection easier.

Inline tube coupler ⌀124 mm to ⌀119 mm in STL format. Total length of this adapter is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends are not rounded.

Tubing reducer ⌀124 mm to ⌀102 mm in STL 3D format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Tube reducer ⌀124 mm to ⌀96 mm in STL 3D format. Final length of this fitting is 151 mm. The larger-diameter tube has a thickness of 3 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 9 mm and a length of 63 mm. The ends feature an internal fillet.

Inline tube junction ⌀125 mm to ⌀100 mm in STL 3D format. Length of this junction is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 1 mm. The ends are not rounded.

Straight tube connector ⌀125 mm to ⌀124 mm in STL 3D format. Final length of this connector is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends have no fillet.

Inline fitting ⌀125 mm to ⌀109 mm in STL 3D format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to ease the connection.