Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 5

Tube adapter ⌀104 mm to ⌀56 mm in STL format. Final length of this connector is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet.

Tubing reducer ⌀104 mm to ⌀54 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends have a fillet to ease the connection.

Tube adapter ⌀105 mm to ⌀80 mm in STL 3D format. Length of this connector is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Inline fitting ⌀105 mm to ⌀101 mm in STL format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.

Straight tubing adapter ⌀105 mm to ⌀104 mm in STL format. Total length of this adapter is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends feature a fillet to make tube connection easier.

Straight sleeve ⌀105 mm to ⌀8 mm in STL format. Final length of this fitting is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet on the inside to make tube connection easier.

Inline tube coupler ⌀105 mm to ⌀90 mm in STL 3D format. Final length of this junction is 400 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 300 mm, the smaller one of 40 mm. The axes of the tubes are offset by 7.4 mm. The ends are rounded to make tube connection easier.

Tube junction ⌀105 mm to ⌀90 mm in STL 3D format. Total length of this coupler is 115 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 50 mm. The axes of the tubes are offset by 7.4 mm. The ends are rounded on the outside.

Straight tube coupler ⌀105 mm to ⌀95 mm in STL format. Final length of this connector is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 70 mm. The ends are rounded on the inside to make tube connection easier.

Straight tubing adapter ⌀105 mm to ⌀85 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Diameter adapter ⌀105 mm to ⌀63 mm in STL format. Total length of this coupler is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 25 mm. The ends are raw.

Straight tubing adapter ⌀105 mm to ⌀99 mm in STL 3D format. Total length of this fitting is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are not rounded.

Inline fitting ⌀105 mm to ⌀98 mm in STL format. Length of this reducer is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are raw.

Straight tube coupler ⌀105 mm to ⌀11 mm in STL format. Final length of this coupler is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends feature an internal fillet to facilitate the connection of the two tubes.

Straight sleeve ⌀105 mm to ⌀79 mm in STL 3D format. Final length of this adapter is 60 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 25 mm. The ends have no fillet.

Tube coupler ⌀105 mm to ⌀55 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends feature a fillet.

Diameter adapter ⌀105 mm to ⌀56 mm in STL 3D format. Total length of this reducer is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends have a fillet to ease the connection.

Straight tube coupler ⌀106 mm to ⌀70 mm in STL 3D format. Total length of this sleeve is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube adapter ⌀106 mm to ⌀80 mm in STL 3D format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet on the inside to ease the connection.

Inline tubing adapter ⌀106 mm to ⌀89 mm in STL 3D format. Total length of this connector is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 8.4 mm. The ends have no fillet.

Tube reducer ⌀106 mm to ⌀89 mm in STL 3D format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 8.4 mm. The ends are raw.

Straight tube fitting ⌀106 mm to ⌀74 mm in STL 3D format. Total length of this junction is 125 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 60 mm. The ends have no fillet.

Straight sleeve ⌀106 mm to ⌀85 mm in STL format. Final length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tubing adapter ⌀106 mm to ⌀56 mm in STL 3D format. Length of this connector is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends have a fillet.

Diameter adapter ⌀107 mm to ⌀53 mm in STL format. Total length of this reducer is 65 mm. The larger-diameter tube has a thickness of 3.1 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to ease the connection.

Tubing reducer ⌀107 mm to ⌀80 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Straight tube adapter ⌀107 mm to ⌀89 mm in STL format. Total length of this reducer is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The axes of the tubes are offset by 8.9 mm. The ends have no fillet.

Straight tube adapter ⌀107 mm to ⌀100 mm in STL 3D format. Final length of this sleeve is 33 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The ends are raw.

Inline tubing adapter ⌀108 mm to ⌀64 mm in STL format. Length of this coupler is 45 mm. The thickness of the tubes is identical: 8 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The axes of the tubes are off-center by 20 mm. The ends have no fillet.

Tube fitting ⌀108 mm to ⌀93 mm in STL format. Length of this sleeve is 190 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 75 mm. The two axes of the tubes are offset by 7.4 mm. The ends have no fillet.