O-ring 3D Files - Inner diameter (ID) 20 to 40 mm | page 3

Model(s) 61 to 79 of 79

O-ring STL file ID 34 × CS 3.6 mm (📦 #3234)

1 object(s) - format STL
O-ring STL file ID 34 × CS 3.6 mm
3D file of circular seal with Internal diameter 34 mm / thickness 3.6  mm. Final diameter resulting is 41.2 mm.
Parameter Value Unit
inner diameter (ID) 34 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 34 × CS 2 mm (📦 #7277)

1 object(s) - format STL
O-ring STL 3D file ID 34 × CS 2 mm
3D file of circular seal with Internal diameter (ID) 34 mm / thickness 2  mm. Final diameter is 38 mm.
Parameter Value Unit
inner diameter (ID) 34 mm
cross section (CS) 2 mm

O-ring STL file ID 34 × CS 8 mm (📦 #7348)

1 object(s) - format STL
O-ring STL file ID 34 × CS 8 mm
3D file in STL format of rubber ring with Internal diameter 34 mm / CS 8  mm. External diameter (OD) resulting is 50 mm.
Parameter Value Unit
inner diameter (ID) 34 mm
cross section (CS) 8 mm

O-ring STL file ID 35 × CS 5 mm (📦 #2716)

1 object(s) - format STL
O-ring STL file ID 35 × CS 5 mm
3D file in STL format of sealing ring with dimensions Inner diameter 35 mm × thickness 5  mm. Final diameter resulting is 45 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 5 mm

O'ring STL file ID 35 × CS 4.5 mm (📦 #5441)

1 object(s) - format STL
o'ring STL file ID 35 × CS 4.5 mm
3D model of rubber ring with Inner diameter (ID) 35 mm × section thickness 4.5  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 44 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 4.5 mm

O-ring STL file ID 35 × CS 1 mm (📦 #7278)

1 object(s) - format STL
O-ring STL file ID 35 × CS 1 mm
Model of O-ring with ID 35 mm / thickness 1  mm. The outer diameter resulting is therefore 37 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 1 mm

O-ring STL file ID 35 × CS 0.5 mm (📦 #7280)

1 object(s) - format STL
O-ring STL file ID 35 × CS 0.5 mm
3D file in STL format of rubber ring with ID (inner diameter) 35 mm by section thickness 0.5  mm. Outer diameter (OD) resulting is therefore 36 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 0.5 mm

O-ring STL 3D file ID 35 × CS 0.8 mm (📦 #7281)

1 object(s) - format STL
O-ring STL 3D file ID 35 × CS 0.8 mm
File of sealing ring with dimensions ID 35 mm / CS (cross section) 0.8  mm. Outer diameter (OD) corresponds to 36.6 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 0.8 mm

O-ring STL 3D file ID 35 × CS 3 mm (📦 #9914)

1 object(s) - format STL
O-ring STL 3D file ID 35 × CS 3 mm
Model of circular seal with Inner diameter 35 mm × CS (cross section) 3  mm. The outer diameter is 41 mm.
Parameter Value Unit
inner diameter (ID) 35 mm
cross section (CS) 3 mm

O-ring STL file ID 35.5 × CS 2.6 mm (📦 #7757)

1 object(s) - format STL
O-ring STL file ID 35.5 × CS 2.6 mm
3D model in STL format of circular seal with ID (inner diameter) 35.5 mm by CS (cross section) 2.6  mm. Final diameter is therefore 40.7 mm.
Parameter Value Unit
inner diameter (ID) 35.5 mm
cross section (CS) 2.6 mm

O-ring STL file ID 36 × CS 2 mm (📦 #2163)

1 object(s) - format STL
O-ring STL file ID 36 × CS 2 mm
File of O-ring with Internal diameter (ID) 36 mm × CS (cross section) 2  mm. Outer diameter (OD, for outer diameter) resulting is 40 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 2 mm

O'ring STL 3D file ID 36 × CS 3.5 mm (📦 #2203)

1 object(s) - format STL
o'ring STL 3D file ID 36 × CS 3.5 mm
3D model in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 36 mm / CS (cross section) 3.5  mm. Outer diameter (OD, for outer diameter) corresponds to 43 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.5 mm

O'ring STL file ID 36 × CS 3.6 mm (📦 #2227)

1 object(s) - format STL
o'ring STL file ID 36 × CS 3.6 mm
STL file of O-ring (torus-shaped seal) with ID 36 mm × CS (cross section) 3.6  mm. Final diameter corresponds to 43.2 mm.
Parameter Value Unit
inner diameter (ID) 36 mm
cross section (CS) 3.6 mm

O'ring STL file ID 36.4 × CS 2.6 mm (📦 #1951)

1 object(s) - format STL
o'ring STL file ID 36.4 × CS 2.6 mm
3D model of O-ring with Internal diameter 36.4 mm by CS 2.6  mm. External diameter (OD) resulting is 41.6 mm.
Parameter Value Unit
inner diameter (ID) 36.4 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 36.7 × CS 2.6 mm (📦 #1950)

1 object(s) - format STL
O-ring STL 3D file ID 36.7 × CS 2.6 mm
3D model in STL format of sealing ring with dimensions Inner diameter 36.7 mm / CS 2.6  mm. The outer diameter resulting is 41.9 mm.
Parameter Value Unit
inner diameter (ID) 36.7 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 37.75 × CS 2.62 mm (📦 #1034)

1 object(s) - format STL
O-ring STL 3D file ID 37.75 × CS 2.62 mm
3D file of O-ring (torus-shaped seal) with ID 37.75 mm / CS (cross section) 2.62  mm. Outer diameter (OD, for outer diameter) is therefore 42.99 mm.
Parameter Value Unit
inner diameter (ID) 37.75 mm
cross section (CS) 2.62 mm

O-ring STL file ID 38 × CS 3.5 mm (📦 #4970)

1 object(s) - format STL
O-ring STL file ID 38 × CS 3.5 mm
Model of sealing ring with Inner diameter (ID) 38 mm / section thickness 3.5  mm. Outer diameter (OD) resulting is 45 mm.
Parameter Value Unit
inner diameter (ID) 38 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 38.5 × CS 3 mm (📦 #9916)

1 object(s) - format STL
O-ring STL 3D file ID 38.5 × CS 3 mm
File of circular seal with Internal diameter (ID) 38.5 mm / CS 3  mm. The outer diameter resulting is 44.5 mm.
Parameter Value Unit
inner diameter (ID) 38.5 mm
cross section (CS) 3 mm

O-ring STL file ID 39 × CS 7 mm (📦 #3090)

1 object(s) - format STL
O-ring STL file ID 39 × CS 7 mm
3D file in STL format of circular seal with dimensions ID (inner diameter) 39 mm / thickness 7  mm. Final diameter corresponds to 53 mm.
Parameter Value Unit
inner diameter (ID) 39 mm
cross section (CS) 7 mm
Can't find the right model? Create it with your specs