Custom O-ring STL file ID 35 × CS 0.5 mm 📦#7280
Generation date: 2026-02-15
3D model download
Free- o-ring-ID35mm-CS0.5mm_model728_model7280-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 35 mm (≃1 3/8 in) |
| #2 | cross section (CS) | 0.5 mm (≃0.02 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 36 mm (≃1.42 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL 3D file ID 35 × CS 0.8 mm (📦 #7281)
1 object(s) - format STL
File of sealing ring with dimensions ID 35 mm / CS (cross section) 0.8 mm. Outer diameter (OD) corresponds to 36.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 0.8 | mm |
O-ring STL file ID 35 × CS 1 mm (📦 #7278)
1 object(s) - format STL
Model of O-ring with ID 35 mm / thickness 1 mm. The outer diameter resulting is therefore 37 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 35 | mm |
| cross section (CS) | 1 | mm |
O'ring STL file ID 24.4 × CS 0.5 mm (📦 #7450)
1 object(s) - format STL
3D model of O-ring with dimensions ID 24.4 mm / CS 0.5 mm. Outer diameter (OD) corresponds to 25.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 24.4 | mm |
| cross section (CS) | 0.5 | mm |
O-ring STL file ID 26 × CS 0.2 mm (📦 #2854)
1 object(s) - format STL
File of O-ring with dimensions Inner diameter 26 mm by section thickness 0.2 mm. External diameter (OD) resulting is 26.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 0.2 | mm |
O'ring STL file ID 23.1 × CS 0.6 mm (📦 #7466)
1 object(s) - format STL
3D model of O-ring with Internal diameter (ID) 23.1 mm by thickness 0.6 mm. External diameter (OD) is therefore 24.3 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 23.1 | mm |
| cross section (CS) | 0.6 | mm |
O'ring STL file ID 41.4 × CS 1 mm (📦 #8070)
1 object(s) - format STL
Model of circular seal with dimensions Inner diameter 41.4 mm × CS 1 mm. The outer diameter is 43.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 41.4 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 26 × CS 1 mm (📦 #4597)
1 object(s) - format STL
3D model of circular seal with ID 26 mm / CS (cross section) 1 mm. External diameter (OD) resulting corresponds to 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 48 × CS 1 mm (📦 #7961)
1 object(s) - format STL
File of rubber ring with dimensions Internal diameter 48 mm × CS 1 mm. Outer diameter (OD, for outer diameter) is therefore 50 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 29 × CS 1.5 mm (📦 #3881)
1 object(s) - format STL
File of rubber ring with Inner diameter 29 mm by thickness 1.5 mm. The outer diameter resulting corresponds to 32 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 29 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 28 × CS 1.5 mm (📦 #3886)
1 object(s) - format STL
3D model in STL format of O-ring (torus-shaped seal) with Internal diameter 28 mm / CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 31 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 28 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 15.5 × CS 1 mm (📦 #7322)
1 object(s) - format STL
3D model of rubber ring with Internal diameter (ID) 15.5 mm × CS (cross section) 1 mm. Outer diameter (OD, for outer diameter) resulting is therefore 17.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.5 | mm |
| cross section (CS) | 1 | mm |
O'ring STL file ID 27 × CS 1.5 mm (📦 #3913)
1 object(s) - format STL
3D model of sealing ring with dimensions Internal diameter (ID) 27 mm × CS (cross section) 1.5 mm. Final diameter resulting is 30 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 27 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 43 × CS 1.5 mm (📦 #3908)
1 object(s) - format STL
3D file in STL format of O-ring (torus-shaped seal) with ID (inner diameter) 43 mm by section thickness 1.5 mm. Outer diameter (OD) is 46 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 43 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL file ID 44 × CS 1.5 mm (📦 #3888)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions ID 44 mm by thickness 1.5 mm. Outer diameter (OD, for outer diameter) is therefore 47 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 44 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 26 × CS 1.5 mm (📦 #3912)
1 object(s) - format STL
Model of circular seal with Internal diameter (ID) 26 mm × CS 1.5 mm. The outer diameter resulting is therefore 29 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 26 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 45 × CS 1.5 mm (📦 #1343)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 45 mm by section thickness 1.5 mm. Outer diameter (OD) corresponds to 48 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 45 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 25 × CS 1.5 mm (📦 #3910)
1 object(s) - format STL
STL file of sealing ring with dimensions ID (inner diameter) 25 mm / section thickness 1.5 mm. Outer diameter (OD) resulting is therefore 28 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 25 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 13 × CS 1 mm (📦 #2106)
1 object(s) - format STL
STL model of rubber ring with ID 13 mm / thickness 1 mm. Final diameter resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1 | mm |
O-ring STL file ID 12 × CS 1 mm (📦 #1576)
1 object(s) - format STL
3D file of O-ring with Internal diameter (ID) 12 mm × section thickness 1 mm. Final diameter resulting is therefore 14 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1 | mm |
O-ring STL 3D file ID 20 × CS 1.5 mm (📦 #4449)
1 object(s) - format STL
3D file in STL format of sealing ring with Internal diameter 20 mm × thickness 1.5 mm. External diameter (OD) is 23 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 20 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 18 × CS 1.5 mm (📦 #8958)
1 object(s) - format STL
File of O-ring with dimensions ID (inner diameter) 18 mm / section thickness 1.5 mm. Final diameter is 21 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 18 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL file ID 17 × CS 1.5 mm (📦 #1559)
1 object(s) - format STL
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5 mm. Final diameter is 20 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 17 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 14.2 × CS 1.4 mm (📦 #8146)
1 object(s) - format STL
STL file of sealing ring with dimensions ID 14.2 mm × CS (cross section) 1.4 mm. External diameter (OD) resulting corresponds to 17 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 14.2 | mm |
| cross section (CS) | 1.4 | mm |
O'ring STL 3D file ID 48 × CS 1.7 mm (📦 #2177)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Inner diameter 48 mm by section thickness 1.7 mm. Outer diameter (OD) resulting is 51.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 48 | mm |
| cross section (CS) | 1.7 | mm |
O-ring STL 3D file ID 16 × CS 1.5 mm (📦 #1560)
1 object(s) - format STL
3D file in STL format of circular seal with dimensions Inner diameter 16 mm by CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 16 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL file ID 15.8 × CS 1.5 mm (📦 #2883)
1 object(s) - format STL
Model of circular seal with ID 15.8 mm × CS (cross section) 1.5 mm. The outer diameter resulting is 18.8 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.8 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 15 × CS 1.5 mm (📦 #1561)
1 object(s) - format STL
STL model of sealing ring with Inner diameter 15 mm / thickness 1.5 mm. The outer diameter resulting is therefore 18 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15 | mm |
| cross section (CS) | 1.5 | mm |
O-ring STL 3D file ID 15.8 × CS 1.6 mm (📦 #6383)
1 object(s) - format STL
3D file of circular seal with dimensions Internal diameter 15.8 mm by section thickness 1.6 mm. Outer diameter (OD, for outer diameter) corresponds to 19 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 15.8 | mm |
| cross section (CS) | 1.6 | mm |
O-ring STL 3D file ID 13 × CS 1.5 mm (📦 #4076)
1 object(s) - format STL
STL file of circular seal with Inner diameter (ID) 13 mm / thickness 1.5 mm. Outer diameter (OD) is therefore 16 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 13 | mm |
| cross section (CS) | 1.5 | mm |
O'ring STL file ID 12 × CS 1.5 mm (📦 #1036)
1 object(s) - format STL
File of rubber ring with Inner diameter 12 mm × CS (cross section) 1.5 mm. Outer diameter (OD, for outer diameter) resulting is therefore 15 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 12 | mm |
| cross section (CS) | 1.5 | mm |