Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 2

Straight tube connector ⌀102 mm to ⌀90 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends feature an external fillet.

Diameter adapter ⌀102 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 50 mm. The ends have no fillet.

Inline sleeve ⌀102 mm to ⌀61 mm in STL 3D format. Final length of this junction is 125 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 15 mm. The ends are raw.

Straight tubing adapter ⌀102 mm to ⌀60 mm in STL format. Length of this reducer is 253 mm. The thickness of the tubes is identical: 4.5 mm. The larger-diameter tube has a length of 89 mm, the smaller one of 88 mm. The ends are raw.

Tube junction ⌀102 mm to ⌀79 mm in STL 3D format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded to ease the connection.

Diameter adapter ⌀102 mm to ⌀67 mm in STL format. Length of this connector is 78 mm. The larger-diameter tube has a thickness of 2.6 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The axes of the tubes are offset by 15 mm. The ends feature a fillet.

Straight tubing adapter ⌀102 mm to ⌀82 mm in STL format. Total length of this fitting is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 10 mm. The two axes of the tubes are offset by 9.9 mm. The ends have no fillet.

Tube junction ⌀102 mm to ⌀80 mm in STL 3D format. Total length of this fitting is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 10 mm. The two axes of the tubes are off-center by 9.9 mm. The ends are not rounded.

Inline tube coupler ⌀103 mm to ⌀90 mm in STL format. Final length of this sleeve is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 70 mm, the smaller one of 50 mm. The ends are not rounded.

Inline tube junction ⌀103 mm to ⌀88 mm in STL format. Total length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends have a fillet on the outside.

Tube adapter ⌀103 mm to ⌀83 mm in STL 3D format. Final length of this sleeve is 105 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 25 mm. The smaller-diameter tube has a thickness of 2.1 mm and a length of 50 mm. The ends have a fillet to make tube connection easier.

Diameter adapter ⌀104 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The two axes of the tubes are offset by 25.4 mm. The ends feature an internal fillet.

Tube adapter ⌀104 mm to ⌀50 mm in STL format. Final length of this junction is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The axes of the tubes are off-center by 26 mm. The ends feature an internal fillet to ease the connection.

Inline tube reducer ⌀104 mm to ⌀50 mm in STL 3D format. Total length of this adapter is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The two axes of the tubes are off-center by 26.9 mm. The ends are rounded on the inside to facilitate the connection of the two tubes.

Inline tube reducer ⌀104 mm to ⌀90 mm in STL format. Total length of this connector is 219 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 89 mm. The ends feature an external fillet to make tube connection easier.

Straight tube connector ⌀104 mm to ⌀90 mm in STL format. Length of this reducer is 180 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 80 mm, the smaller one of 70 mm. The ends have no fillet.

Straight sleeve ⌀104 mm to ⌀92 mm in STL 3D format. Total length of this coupler is 50 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 25 mm. The ends have no fillet.

Tube fitting ⌀104 mm to ⌀60 mm in STL 3D format. Total length of this reducer is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Straight tube adapter ⌀104 mm to ⌀62 mm in STL format. Total length of this connector is 45 mm. The thickness of the tubes is identical: 3.8 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 20 mm. The two axes of the tubes are off-center by 15 mm. The ends have a fillet on the outside.

Straight tube connector ⌀104 mm to ⌀81 mm in STL 3D format. Length of this fitting is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 5 mm. The ends are not rounded.

Straight tube coupler ⌀104 mm to ⌀65 mm in STL 3D format. Total length of this adapter is 85 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2.1 mm and a length of 35 mm. The ends have a fillet to make tube connection easier.

Inline tube coupler ⌀104 mm to ⌀65 mm in STL format. Final length of this adapter is 85 mm. The larger-diameter tube has a thickness of 2.4 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2.1 mm and a length of 35 mm. The ends feature a fillet to ease the connection.

Tube junction ⌀104 mm to ⌀90 mm in STL 3D format. Final length of this reducer is 80 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The ends are not rounded.

Straight sleeve ⌀104 mm to ⌀80 mm in STL format. Final length of this junction is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 10 mm. The axes of the tubes are off-center by 9.9 mm. The ends are raw.

Tube adapter ⌀105 mm to ⌀80 mm in STL 3D format. Length of this connector is 63 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Inline fitting ⌀105 mm to ⌀101 mm in STL format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.

Straight tube coupler ⌀106 mm to ⌀70 mm in STL 3D format. Total length of this sleeve is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Diameter adapter ⌀107 mm to ⌀53 mm in STL format. Total length of this reducer is 65 mm. The larger-diameter tube has a thickness of 3.1 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2.5 mm and a length of 30 mm. The axes of the tubes are off-center by 15 mm. The ends are rounded on the outside to ease the connection.

Tubing reducer ⌀107 mm to ⌀80 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tubing adapter ⌀108 mm to ⌀64 mm in STL format. Length of this coupler is 45 mm. The thickness of the tubes is identical: 8 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The axes of the tubes are off-center by 20 mm. The ends have no fillet.