O-ring 3D Files - Inner diameter (ID) 0.1 to 20 mm | page 5

Model(s) 121 to 150 of 153

O-ring STL file ID 16.5 × CS 1.8 mm (📦 #1594)

1 object(s) - format STL
O-ring STL file ID 16.5 × CS 1.8 mm
STL model of rubber ring with dimensions ID (inner diameter) 16.5 mm by section thickness 1.8  mm. Outer diameter (OD, for outer diameter) corresponds to 20.1 mm.
Parameter Value Unit
inner diameter (ID) 16.5 mm
cross section (CS) 1.8 mm

O'ring STL file ID 16.5 × CS 1.7 mm (📦 #2884)

1 object(s) - format STL
o'ring STL file ID 16.5 × CS 1.7 mm
3D model in STL format of circular seal with dimensions Internal diameter 16.5 mm × section thickness 1.7  mm. The outer diameter corresponds to 19.9 mm.
Parameter Value Unit
inner diameter (ID) 16.5 mm
cross section (CS) 1.7 mm

O'ring STL 3D file ID 16.6 × CS 1.9 mm (📦 #3231)

1 object(s) - format STL
o'ring STL 3D file ID 16.6 × CS 1.9 mm
3D model in STL format of rubber ring with ID 16.6 mm by section thickness 1.9  mm. Final diameter resulting is 20.4 mm.
Parameter Value Unit
inner diameter (ID) 16.6 mm
cross section (CS) 1.9 mm

O-ring STL 3D file ID 16.6 × CS 3.4 mm (📦 #8761)

1 object(s) - format STL
O-ring STL 3D file ID 16.6 × CS 3.4 mm
3D file in STL format of rubber ring with dimensions Inner diameter 16.6 mm / thickness 3.4  mm. The outer diameter corresponds to 23.4 mm.
Parameter Value Unit
inner diameter (ID) 16.6 mm
cross section (CS) 3.4 mm

O-ring STL file ID 17 × CS 2.5 mm (📦 #1019)

1 object(s) - format STL
O-ring STL file ID 17 × CS 2.5 mm
File of rubber ring with ID (inner diameter) 17 mm / CS 2.5  mm. Outer diameter (OD) resulting corresponds to 22 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 17 × CS 4 mm (📦 #1262)

1 object(s) - format STL
O-ring STL 3D file ID 17 × CS 4 mm
File of sealing ring with Internal diameter 17 mm by CS 4  mm. Outer diameter (OD, for outer diameter) resulting is therefore 25 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 4 mm

O'ring STL file ID 17 × CS 1.5 mm (📦 #1559)

1 object(s) - format STL
o'ring STL file ID 17 × CS 1.5 mm
Model of sealing ring with Inner diameter (ID) 17 mm by CS (cross section) 1.5  mm. Final diameter is 20 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 1.5 mm

O-ring STL file ID 17 × CS 3 mm (📦 #3838)

1 object(s) - format STL
O-ring STL file ID 17 × CS 3 mm
3D file of O-ring (torus-shaped seal) with dimensions Inner diameter 17 mm by section thickness 3  mm. External diameter (OD) is 23 mm.
Parameter Value Unit
inner diameter (ID) 17 mm
cross section (CS) 3 mm

O-ring STL file ID 17.1 × CS 3 mm (📦 #9414)

1 object(s) - format STL
O-ring STL file ID 17.1 × CS 3 mm
Model of O-ring with ID 17.1 mm by CS 3  mm. Outer diameter (OD) resulting corresponds to 23.1 mm.
Parameter Value Unit
inner diameter (ID) 17.1 mm
cross section (CS) 3 mm

O-ring STL file ID 17.4 × CS 3.5 mm (📦 #3505)

1 object(s) - format STL
O-ring STL file ID 17.4 × CS 3.5 mm
STL model of sealing ring with ID 17.4 mm / CS (cross section) 3.5  mm. The outer diameter is 24.4 mm.
Parameter Value Unit
inner diameter (ID) 17.4 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 17.5 × CS 7 mm (📦 #8765)

1 object(s) - format STL
O-ring STL 3D file ID 17.5 × CS 7 mm
STL file of circular seal with dimensions Internal diameter (ID) 17.5 mm × CS 7  mm. Final diameter corresponds to 31.5 mm.
Parameter Value Unit
inner diameter (ID) 17.5 mm
cross section (CS) 7 mm

O-ring STL file ID 17.6 × CS 1.8 mm (📦 #1593)

1 object(s) - format STL
O-ring STL file ID 17.6 × CS 1.8 mm
File of O-ring with ID (inner diameter) 17.6 mm / thickness 1.8  mm. Outer diameter (OD) resulting is 21.2 mm.
Parameter Value Unit
inner diameter (ID) 17.6 mm
cross section (CS) 1.8 mm

O-ring STL file ID 17.6 × CS 2 mm (📦 #8194)

1 object(s) - format STL
O-ring STL file ID 17.6 × CS 2 mm
Model of circular seal with Internal diameter 17.6 mm by CS (cross section) 2  mm. Outer diameter (OD, for outer diameter) corresponds to 21.6 mm.
Parameter Value Unit
inner diameter (ID) 17.6 mm
cross section (CS) 2 mm

O-ring STL file ID 17.7 × CS 1.9 mm (📦 #8259)

1 object(s) - format STL
O-ring STL file ID 17.7 × CS 1.9 mm
3D model in STL format of sealing ring with dimensions Internal diameter (ID) 17.7 mm × CS (cross section) 1.9  mm. Final diameter corresponds to 21.5 mm.
Parameter Value Unit
inner diameter (ID) 17.7 mm
cross section (CS) 1.9 mm

O'ring STL 3D file ID 17.7 × CS 2.5 mm (📦 #8534)

1 object(s) - format STL
o'ring STL 3D file ID 17.7 × CS 2.5 mm
3D model of O-ring with Internal diameter 17.7 mm × CS 2.5  mm. Final diameter resulting is 22.7 mm.
Parameter Value Unit
inner diameter (ID) 17.7 mm
cross section (CS) 2.5 mm

O-ring STL file ID 17.8 × CS 2 mm (📦 #2739)

1 object(s) - format STL
O-ring STL file ID 17.8 × CS 2 mm
3D file of sealing ring with ID 17.8 mm × CS 2  mm. Final diameter is 21.8 mm.
Parameter Value Unit
inner diameter (ID) 17.8 mm
cross section (CS) 2 mm

O-ring STL file ID 17.8 × CS 1.8 mm (📦 #3317)

1 object(s) - format STL
O-ring STL file ID 17.8 × CS 1.8 mm
3D file in STL format of sealing ring with Inner diameter (ID) 17.8 mm × CS (cross section) 1.8  mm. Final diameter resulting is therefore 21.4 mm.
Parameter Value Unit
inner diameter (ID) 17.8 mm
cross section (CS) 1.8 mm

O-ring STL 3D file ID 17.9 × CS 1.4 mm (📦 #9421)

1 object(s) - format STL
O-ring STL 3D file ID 17.9 × CS 1.4 mm
3D file in STL format of sealing ring with dimensions ID (inner diameter) 17.9 mm × CS (cross section) 1.4  mm. Outer diameter (OD, for outer diameter) resulting corresponds to 20.7 mm.
Parameter Value Unit
inner diameter (ID) 17.9 mm
cross section (CS) 1.4 mm

O-ring STL file ID 18 × CS 4.6 mm (📦 #1216)

1 object(s) - format STL
O-ring STL file ID 18 × CS 4.6 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 18 mm by CS (cross section) 4.6  mm. The outer diameter is 27.2 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 4.6 mm

O-ring STL 3D file ID 18 × CS 5 mm (📦 #4471)

1 object(s) - format STL
O-ring STL 3D file ID 18 × CS 5 mm
3D file of circular seal with ID 18 mm by CS 5  mm. Outer diameter (OD, for outer diameter) is 28 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 5 mm

O-ring STL 3D file ID 18 × CS 3 mm (📦 #8136)

1 object(s) - format STL
O-ring STL 3D file ID 18 × CS 3 mm
Model of circular seal with ID 18 mm / CS (cross section) 3  mm. Outer diameter (OD, for outer diameter) is 24 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 3 mm

O-ring STL 3D file ID 18 × CS 1.8 mm (📦 #8256)

1 object(s) - format STL
O-ring STL 3D file ID 18 × CS 1.8 mm
3D file of rubber ring with Inner diameter 18 mm × section thickness 1.8  mm. External diameter (OD) is 21.6 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 1.8 mm

O-ring STL 3D file ID 18 × CS 1.5 mm (📦 #8958)

1 object(s) - format STL
O-ring STL 3D file ID 18 × CS 1.5 mm
File of O-ring with dimensions ID (inner diameter) 18 mm / section thickness 1.5  mm. Final diameter is 21 mm.
Parameter Value Unit
inner diameter (ID) 18 mm
cross section (CS) 1.5 mm

O'ring STL file ID 18.2 × CS 2.5 mm (📦 #2737)

1 object(s) - format STL
o'ring STL file ID 18.2 × CS 2.5 mm
STL model of circular seal with ID (inner diameter) 18.2 mm × CS 2.5  mm. Outer diameter (OD, for outer diameter) is therefore 23.2 mm.
Parameter Value Unit
inner diameter (ID) 18.2 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 18.2 × CS 2 mm (📦 #3316)

1 object(s) - format STL
O-ring STL 3D file ID 18.2 × CS 2 mm
Model of rubber ring with Internal diameter (ID) 18.2 mm / CS (cross section) 2  mm. Outer diameter (OD) corresponds to 22.2 mm.
Parameter Value Unit
inner diameter (ID) 18.2 mm
cross section (CS) 2 mm

O-ring STL 3D file ID 18.2 × CS 7 mm (📦 #8764)

1 object(s) - format STL
O-ring STL 3D file ID 18.2 × CS 7 mm
Model of O-ring with Inner diameter 18.2 mm × thickness 7  mm. Outer diameter (OD) is therefore 32.2 mm.
Parameter Value Unit
inner diameter (ID) 18.2 mm
cross section (CS) 7 mm

O-ring STL 3D file ID 18.3 × CS 3.6 mm (📦 #4440)

1 object(s) - format STL
O-ring STL 3D file ID 18.3 × CS 3.6 mm
3D file in STL format of O-ring (torus-shaped seal) with dimensions Inner diameter (ID) 18.3 mm by CS 3.6  mm. The outer diameter resulting corresponds to 25.5 mm.
Parameter Value Unit
inner diameter (ID) 18.3 mm
cross section (CS) 3.6 mm

O'ring STL file ID 18.3 × CS 1.4 mm (📦 #9420)

1 object(s) - format STL
o'ring STL file ID 18.3 × CS 1.4 mm
STL file of O-ring with dimensions Internal diameter 18.3 mm by CS (cross section) 1.4  mm. Final diameter is 21.1 mm.
Parameter Value Unit
inner diameter (ID) 18.3 mm
cross section (CS) 1.4 mm

O'ring STL 3D file ID 18.5 × CS 7 mm (📦 #8762)

1 object(s) - format STL
o'ring STL 3D file ID 18.5 × CS 7 mm
File of circular seal with dimensions ID (inner diameter) 18.5 mm / thickness 7  mm. Outer diameter (OD) corresponds to 32.5 mm.
Parameter Value Unit
inner diameter (ID) 18.5 mm
cross section (CS) 7 mm

O'ring STL 3D file ID 18.5 × CS 1.4 mm (📦 #9415)

1 object(s) - format STL
o'ring STL 3D file ID 18.5 × CS 1.4 mm
File of O-ring with dimensions ID 18.5 mm × CS (cross section) 1.4  mm. Outer diameter (OD) resulting corresponds to 21.3 mm.
Parameter Value Unit
inner diameter (ID) 18.5 mm
cross section (CS) 1.4 mm
Can't find the right model? Create it with your specs