Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 3

Tubing adapter ⌀20 mm to ⌀12 mm in STL 3D format. Length of this adapter is 50 mm. The larger-diameter tube has a thickness of 2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are rounded on the inside to make tube connection easier.

Inline tube reducer ⌀20 mm to ⌀13 mm in STL 3D format. Final length of this connector is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The two axes of the tubes are offset by 3.4 mm. The ends are rounded to facilitate the connection of the two tubes.

Tube coupler ⌀20 mm to ⌀16 mm in STL format. Length of this sleeve is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 20 mm. The ends are raw.

Tubing adapter ⌀21 mm to ⌀9 mm in STL 3D format. Final length of this reducer is 42 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 12 mm. The two axes of the tubes are offset by 3.1 mm. The ends are raw.

Tube fitting ⌀21 mm to ⌀9 mm in STL format. Final length of this coupler is 55 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 25 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The ends are rounded.

Tube reducer ⌀21 mm to ⌀12 mm in STL 3D format. Total length of this coupler is 31 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The ends have no fillet.

Inline tube adapter ⌀21 mm to ⌀13 mm in STL 3D format. Final length of this sleeve is 31 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 10 mm. The ends are not rounded.

Tube junction ⌀22 mm to ⌀12 mm in STL 3D format. Length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 40 mm. The ends are not rounded.

Straight tube coupler ⌀22 mm to ⌀18 mm in STL 3D format. Length of this sleeve is 140 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Straight tubing adapter ⌀22 mm to ⌀19 mm in STL format. Total length of this fitting is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends have no fillet.

Tube junction ⌀22 mm to ⌀14 mm in STL format. Length of this fitting is 31 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The ends are raw.

Straight tube adapter ⌀22 mm to ⌀20 mm in STL format. Total length of this junction is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 15 mm. The ends have no fillet.

Inline tube adapter ⌀22 mm to ⌀13 mm in STL 3D format. Final length of this junction is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 15 mm. The ends are raw.

Straight tube reducer ⌀22 mm to ⌀15 mm in STL 3D format. Total length of this adapter is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Diameter adapter ⌀22 mm to ⌀12 mm in STL format. Length of this junction is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The axes of the tubes are off-center by 4.9 mm. The ends feature an external fillet to facilitate the connection of the two tubes.

Diameter adapter ⌀22 mm to ⌀17 mm in STL 3D format. Total length of this fitting is 55 mm. The larger-diameter tube has a thickness of 2.9 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 15 mm. The ends are rounded on the inside.

Inline tube junction ⌀23 mm to ⌀16 mm in STL format. Final length of this sleeve is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 30 mm. The axes of the tubes are off-center by 2.5 mm. The ends are raw.

Tubing adapter ⌀23 mm to ⌀7 mm in STL 3D format. Final length of this junction is 63 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 7 mm, the smaller one of 38 mm. The ends are not rounded.

Straight sleeve ⌀23 mm to ⌀22 mm in STL 3D format. Length of this coupler is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Straight tube connector ⌀24 mm to ⌀9 mm in STL format. Final length of this reducer is 45 mm. The thickness of the tubes is identical: 2.7 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Tubing adapter ⌀24 mm to ⌀10 mm in STL 3D format. Length of this fitting is 90 mm. The larger-diameter tube has a thickness of 2.8 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.

Straight tube connector ⌀24 mm to ⌀10 mm in STL format. Final length of this fitting is 45 mm. The larger-diameter tube has a thickness of 2.7 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet to make tube connection easier.

Tubing adapter ⌀24 mm to ⌀10 mm in STL 3D format. Total length of this reducer is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 10 mm. The ends have a fillet on the outside to ease the connection.

Tube connector ⌀24 mm to ⌀9 mm in STL 3D format. Total length of this coupler is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are off-center by 4 mm. The ends are raw.

Inline tube junction ⌀24 mm to ⌀23 mm in STL format. Length of this adapter is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.

Straight tube connector ⌀24 mm to ⌀19 mm in STL 3D format. Final length of this junction is 22 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 7 mm. The ends are not rounded.

Inline tubing adapter ⌀24 mm to ⌀17 mm in STL 3D format. Final length of this coupler is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends are raw.

Diameter adapter ⌀24 mm to ⌀14 mm in STL 3D format. Length of this sleeve is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.

Tube fitting ⌀25 mm to ⌀20 mm in STL 3D format. Length of this reducer is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Inline sleeve ⌀25 mm to ⌀7 mm in STL format. Total length of this connector is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The ends have no fillet.