Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 23

Straight tube coupler ⌀70 mm to ⌀68 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube junction ⌀70 mm to ⌀49 mm in STL 3D format. Final length of this adapter is 110 mm. The larger-diameter tube has a thickness of 5 mm and a sleeve length of 50 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 40 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Tubing adapter ⌀70 mm to ⌀34 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The axes of the tubes are off-center by 3 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Tube connector ⌀70 mm to ⌀45 mm in STL format. Total length of this connector is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 5 mm as well. The ends are rounded on the inside to ease the connection.

Inline fitting ⌀70 mm to ⌀60 mm in STL format. Length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 20 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Straight tube adapter ⌀70 mm to ⌀64 mm in STL 3D format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 20 mm. The ends have a fillet on the outside to ease the connection.

Inline tube adapter ⌀70 mm to ⌀55 mm in STL 3D format. Total length of this sleeve is 57 mm. The larger-diameter tube has a thickness of 2.4 mm and a sleeve length of 22 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm. The two axes of the tubes are offset by 5 mm. The ends have a fillet to make tube connection easier.

Inline tube reducer ⌀70 mm to ⌀32 mm in STL format. Length of this sleeve is 62 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 32 mm, the smaller one of 20 mm. The ends are raw.

Inline tube coupler ⌀70 mm to ⌀32 mm in STL 3D format. Total length of this adapter is 52 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 32 mm, the smaller one of 10 mm. The ends have no fillet.

Straight tube connector ⌀70 mm to ⌀63 mm in STL format. Total length of this sleeve is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube reducer ⌀70 mm to ⌀61 mm in STL format. Length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet.

Inline sleeve ⌀70 mm to ⌀43 mm in STL format. Total length of this junction is 149 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the outside to make tube connection easier.

Inline tube coupler ⌀70 mm to ⌀65 mm in STL 3D format. Total length of this connector is 120 mm. The larger-diameter tube has a thickness of 5 mm and a sleeve length of 50 mm. The smaller-diameter tube has a thickness of 9 mm and a length of 50 mm as well. The ends are rounded on the outside to facilitate the connection of the two tubes.

Tube reducer ⌀70 mm to ⌀50 mm in STL format. Total length of this junction is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 30 mm. The ends are not rounded.

Straight tubing adapter ⌀70 mm to ⌀50 mm in STL 3D format. Total length of this fitting is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 30 mm. The ends are raw.

Inline fitting ⌀70 mm to ⌀40 mm in STL format. Length of this sleeve is 57 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Inline tube reducer ⌀71 mm to ⌀30 mm in STL 3D format. Length of this fitting is 86 mm. The thickness of the tubes is identical: 3.2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 26 mm. The ends feature a fillet.

Tube junction ⌀71 mm to ⌀41 mm in STL 3D format. Total length of this reducer is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 1 mm. The ends are raw.

Inline tube coupler ⌀71 mm to ⌀55 mm in STL format. Total length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline fitting ⌀71 mm to ⌀68 mm in STL format. Total length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline sleeve ⌀71 mm to ⌀50 mm in STL 3D format. Final length of this adapter is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the outside to ease the connection.

Straight tube connector ⌀71 mm to ⌀65 mm in STL 3D format. Length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet on the outside.

Inline tube reducer ⌀71 mm to ⌀40 mm in STL 3D format. Final length of this sleeve is 15 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 5 mm as well. The ends have no fillet.

Inline tubing adapter ⌀71 mm to ⌀38 mm in STL 3D format. Final length of this junction is 50 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.

Tube reducer ⌀72 mm to ⌀33 mm in STL format. Length of this connector is 48 mm. The thickness of the tubes is identical: 3.2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 8 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Inline tube coupler ⌀72 mm to ⌀46 mm in STL format. Total length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded on the outside to make tube connection easier.

Tubing adapter ⌀72 mm to ⌀61 mm in STL 3D format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Inline tubing adapter ⌀72 mm to ⌀65 mm in STL 3D format. Length of this coupler is 49 mm. The larger-diameter tube has a thickness of 3 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm as well. The ends have a fillet on the outside.

Tubing adapter ⌀73 mm to ⌀68 mm in STL format. Length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are not rounded.

Tube reducer ⌀73 mm to ⌀51 mm in STL format. Length of this coupler is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are raw.