Custom Tubing adapter STL 3D file ⌀ 70–45 mm (Length: 15 mm) 📦#4703

Tube adapter ⌀64 mm to ⌀54 mm in STL 3D format. Total length of this adapter is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are rounded on the inside.

Inline tube adapter ⌀57 mm to ⌀51 mm in STL 3D format. Final length of this reducer is 30 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Straight tube fitting ⌀76 mm to ⌀50 mm in STL 3D format. Length of this fitting is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.

Inline sleeve ⌀78 mm to ⌀50 mm in STL format. Length of this sleeve is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to ease the connection.

Inline tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Total length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to make tube connection easier.

Straight sleeve ⌀80 mm to ⌀52 mm in STL 3D format. Final length of this connector is 28 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 8 mm, the smaller one of 10 mm. The ends have a fillet on the outside.

Straight tube fitting ⌀62 mm to ⌀52 mm in STL format. Length of this junction is 33 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 8 mm, the smaller one of 15 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Straight tubing adapter ⌀69 mm to ⌀60 mm in STL format. Length of this fitting is 58 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet on the inside.

Diameter adapter ⌀51 mm to ⌀47 mm in STL format. Total length of this sleeve is 30 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends are rounded.

Inline tube adapter ⌀69 mm to ⌀60 mm in STL format. Final length of this coupler is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the inside.

Straight tube connector ⌀59 mm to ⌀50 mm in STL format. Length of this sleeve is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the inside to facilitate the connection of the two tubes.

Inline tube adapter ⌀50 mm to ⌀6 mm in STL 3D format. Length of this fitting is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 15 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Straight tube reducer ⌀50 mm to ⌀20 mm in STL 3D format. Total length of this connector is 26 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 8 mm, the smaller one of 8 mm as well. The ends have a fillet.

Straight tube connector ⌀83 mm to ⌀73 mm in STL 3D format. Total length of this reducer is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends are rounded to facilitate the connection of the two tubes.

Tube connector ⌀36 mm to ⌀19 mm in STL 3D format. Length of this adapter is 26 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 8 mm. The ends are rounded on the inside to facilitate the connection of the two tubes.

Inline tube reducer ⌀35 mm to ⌀18 mm in STL 3D format. Final length of this fitting is 26 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 8 mm. The ends are rounded on the inside to ease the connection.

Tube junction ⌀50 mm to ⌀40 mm in STL 3D format. Length of this coupler is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Tubing adapter ⌀79 mm to ⌀77 mm in STL 3D format. Length of this sleeve is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are rounded on the outside to facilitate the connection of the two tubes.

Straight tube connector ⌀38 mm to ⌀19 mm in STL format. Final length of this fitting is 50 mm. The larger-diameter tube has a thickness of 2.9 mm and a sleeve length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The ends have a fillet on the inside to ease the connection.

Straight sleeve ⌀88 mm to ⌀76 mm in STL 3D format. Total length of this sleeve is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are rounded on the inside.

Tubing reducer ⌀47 mm to ⌀42 mm in STL 3D format. Final length of this junction is 48 mm. The larger-diameter tube has a thickness of 2.2 mm and a sleeve length of 25 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 13 mm. The ends have a fillet to ease the connection.

Tube fitting ⌀32 mm to ⌀15 mm in STL format. Length of this junction is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.

Inline tube reducer ⌀80 mm to ⌀50 mm in STL format. Total length of this coupler is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to make tube connection easier.

Tube reducer ⌀70 mm to ⌀61 mm in STL format. Length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet.

Diameter adapter ⌀70 mm to ⌀69 mm in STL 3D format. Length of this sleeve is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Tube junction ⌀88 mm to ⌀70 mm in STL 3D format. Length of this fitting is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to ease the connection.

Inline sleeve ⌀38 mm to ⌀34 mm in STL 3D format. Length of this connector is 28 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends have a fillet to make tube connection easier.

Tube coupler ⌀32 mm to ⌀15 mm in STL format. Length of this junction is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.