Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 2

Inline tubing adapter ⌀25 mm to ⌀10 mm in STL 3D format. Total length of this adapter is 45 mm. The larger-diameter tube has a thickness of 2.2 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet to ease the connection.

Tube connector ⌀25 mm to ⌀10 mm in STL 3D format. Final length of this adapter is 45 mm. The larger-diameter tube has a thickness of 2.4 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet.

Tube junction ⌀25 mm to ⌀21 mm in STL format. Total length of this junction is 148 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 72 mm, the smaller one of 71 mm. The ends have no fillet.

Diameter adapter ⌀25 mm to ⌀21 mm in STL 3D format. Total length of this adapter is 137 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 31 mm, the smaller one of 71 mm. The ends have no fillet.

Tube adapter ⌀26 mm to ⌀7 mm in STL format. Total length of this junction is 39 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 14 mm. The ends are raw.

Straight sleeve ⌀26 mm to ⌀10 mm in STL format. Length of this adapter is 45 mm. The larger-diameter tube has a thickness of 2.5 mm and a length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends are rounded on the outside.

Tubing adapter ⌀26 mm to ⌀10 mm in STL format. Length of this junction is 45 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet to make tube connection easier.

Straight tubing adapter ⌀26 mm to ⌀10 mm in STL format. Length of this reducer is 45 mm. The larger-diameter tube has a thickness of 2.4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends feature an external fillet to make tube connection easier.

Inline fitting ⌀26 mm to ⌀10 mm in STL format. Total length of this coupler is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 10 mm. The ends have a fillet on the outside to ease the connection.

Inline tubing adapter ⌀26 mm to ⌀24 mm in STL 3D format. Final length of this reducer is 148 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 29 mm. The ends are not rounded.

Straight tube connector ⌀27 mm to ⌀7 mm in STL format. Length of this coupler is 39 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 14 mm. The ends are raw.

Straight tube adapter ⌀27 mm to ⌀21 mm in STL 3D format. Length of this fitting is 137 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 31 mm, the smaller one of 71 mm. The ends have no fillet.

Straight tube coupler ⌀27 mm to ⌀21 mm in STL 3D format. Total length of this sleeve is 395 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 300 mm. The ends have no fillet.

Inline tube junction ⌀27 mm to ⌀23 mm in STL format. Length of this junction is 162 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 31 mm, the smaller one of 71 mm. The ends have no fillet.

Tube junction ⌀27 mm to ⌀23 mm in STL format. Length of this fitting is 192 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 61 mm, the smaller one of 71 mm. The ends are raw.

Inline tubing adapter ⌀28 mm to ⌀10 mm in STL 3D format. Final length of this adapter is 72 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm. The two axes of the tubes are off-center by 5 mm. The ends are rounded on the outside to ease the connection.

Diameter adapter ⌀28 mm to ⌀10 mm in STL format. Final length of this fitting is 72 mm. The larger-diameter tube has a thickness of 3 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm. The ends are rounded on the outside to ease the connection.

Inline tube coupler ⌀30 mm to ⌀26 mm in STL format. Total length of this connector is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 30 mm. The ends have no fillet.

Inline tube coupler ⌀30 mm to ⌀17 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded to make tube connection easier.

Inline tube coupler ⌀30 mm to ⌀18 mm in STL format. Final length of this reducer is 60 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 30 mm. The ends have a fillet on the outside to make tube connection easier.

Straight tube reducer ⌀32 mm to ⌀25 mm in STL 3D format. Length of this junction is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends have no fillet.

Inline tube reducer ⌀32 mm to ⌀15 mm in STL format. Length of this adapter is 50 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.

Tube coupler ⌀32 mm to ⌀15 mm in STL format. Length of this junction is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.

Tube fitting ⌀32 mm to ⌀15 mm in STL format. Length of this junction is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.

Straight tube connector ⌀32 mm to ⌀15 mm in STL format. Total length of this fitting is 19 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a length of 7 mm, the smaller one of 7 mm as well. The ends have a fillet on the inside.

Straight tube adapter ⌀32 mm to ⌀15 mm in STL 3D format. Length of this reducer is 21 mm. The thickness of the tubes is identical: 3.5 mm. The larger-diameter tube has a sleeve length of 7 mm, the smaller one of 7 mm as well. The ends feature an external fillet.

Diameter adapter ⌀33 mm to ⌀19 mm in STL 3D format. Total length of this fitting is 56 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 19 mm, the smaller one of 10 mm. The two axes of the tubes are offset by 6.1 mm. The ends are raw.

Straight tube coupler ⌀33 mm to ⌀10 mm in STL 3D format. Length of this connector is 95 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.

Tube junction ⌀33 mm to ⌀10 mm in STL 3D format. Final length of this fitting is 250 mm. The larger-diameter tube has a thickness of 2.9 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 230 mm. The ends have no fillet.

Inline fitting ⌀33 mm to ⌀10 mm in STL format. Final length of this reducer is 260 mm. The larger-diameter tube has a thickness of 2.9 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 230 mm. The ends are not rounded.