Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 13

Tube reducer ⌀50 mm to ⌀32 mm in STL 3D format. Total length of this fitting is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the outside to make tube connection easier.

Inline tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Final length of this fitting is 43 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends are not rounded.

Inline tube junction ⌀50 mm to ⌀45 mm in STL 3D format. Final length of this connector is 95 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends are not rounded.

Tube reducer ⌀50 mm to ⌀20 mm in STL format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet.

Inline tube coupler ⌀50 mm to ⌀20 mm in STL 3D format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 20 mm. The ends are raw.

Straight tube reducer ⌀50 mm to ⌀20 mm in STL 3D format. Total length of this connector is 26 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 8 mm, the smaller one of 8 mm as well. The ends have a fillet.

Inline tube coupler ⌀50 mm to ⌀45 mm in STL format. Total length of this junction is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tubing adapter ⌀50 mm to ⌀22 mm in STL format. Total length of this junction is 36 mm. The larger-diameter tube has a thickness of 3 mm and a length of 12 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm as well. The axes of the tubes are offset by 2 mm. The ends are raw.

Tube adapter ⌀50 mm to ⌀40 mm in STL format. Total length of this junction is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 30 mm. The ends are raw.

Tube coupler ⌀51 mm to ⌀35 mm in STL format. Final length of this reducer is 75 mm. The larger-diameter tube has a thickness of 6 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm as well. The ends are rounded to ease the connection.

Tube reducer ⌀51 mm to ⌀35 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet.

Inline tubing adapter ⌀51 mm to ⌀32 mm in STL 3D format. Length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Diameter adapter ⌀51 mm to ⌀47 mm in STL format. Total length of this sleeve is 30 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends are rounded.

Inline tubing adapter ⌀51 mm to ⌀48 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Tubing reducer ⌀51 mm to ⌀21 mm in STL format. Length of this coupler is 36 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 12 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm as well. The axes of the tubes are off-center by 2 mm. The ends have no fillet.

Straight tube reducer ⌀51 mm to ⌀20 mm in STL format. Final length of this sleeve is 36 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 12 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm as well. The axes of the tubes are offset by 2 mm. The ends are raw.

Straight tubing adapter ⌀51 mm to ⌀38 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Inline fitting ⌀52 mm to ⌀45 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends have no fillet.

Tube junction ⌀52 mm to ⌀25 mm in STL 3D format. Final length of this junction is 105 mm. The larger-diameter tube has a thickness of 6 mm and a sleeve length of 40 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends have a fillet to make tube connection easier.

Straight tubing adapter ⌀52 mm to ⌀24 mm in STL 3D format. Total length of this fitting is 40 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 10 mm. The ends feature an internal fillet to facilitate the connection of the two tubes.

Straight tube coupler ⌀52 mm to ⌀20 mm in STL format. Length of this coupler is 36 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 12 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 12 mm as well. The two axes of the tubes are off-center by 2 mm. The ends are not rounded.

Straight tube fitting ⌀53 mm to ⌀45 mm in STL 3D format. Final length of this reducer is 100 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are raw.

Straight tube fitting ⌀53 mm to ⌀35 mm in STL 3D format. Length of this adapter is 100 mm. The larger-diameter tube has a thickness of 4 mm and a length of 45 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 40 mm. The ends are not rounded.

Tube coupler ⌀53 mm to ⌀46 mm in STL 3D format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 60 mm. The ends are raw.

Tube adapter ⌀53 mm to ⌀40 mm in STL 3D format. Final length of this sleeve is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.

Tube fitting ⌀54 mm to ⌀45 mm in STL format. Total length of this reducer is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends are raw.

Inline tube junction ⌀54 mm to ⌀53 mm in STL 3D format. Length of this sleeve is 85 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 54 mm, the smaller one of 26 mm. The ends are raw.

Inline sleeve ⌀54 mm to ⌀44 mm in STL format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Tubing reducer ⌀54 mm to ⌀39 mm in STL 3D format. Length of this connector is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are rounded on the inside.

Tube reducer ⌀54 mm to ⌀25 mm in STL 3D format. Length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The axes of the tubes are off-center by 10 mm. The ends have a fillet to make tube connection easier.