Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 11

Straight tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Total length of this reducer is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 20 mm as well. The ends are rounded on the outside to ease the connection.

Tube junction ⌀50 mm to ⌀40 mm in STL 3D format. Length of this coupler is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Straight tube fitting ⌀50 mm to ⌀40 mm in STL format. Length of this reducer is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet to ease the connection.

Tube fitting ⌀50 mm to ⌀30 mm in STL format. Final length of this reducer is 95 mm. The larger-diameter tube has a thickness of 5 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends have a fillet to facilitate the connection of the two tubes.

Tube connector ⌀50 mm to ⌀39 mm in STL 3D format. Total length of this fitting is 390 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 300 mm. The two axes of the tubes are off-center by 5 mm. The ends have a fillet on the outside.

Straight tube coupler ⌀50 mm to ⌀45 mm in STL 3D format. Length of this adapter is 90 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline tube adapter ⌀50 mm to ⌀49 mm in STL 3D format. Length of this fitting is 200 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 100 mm, the smaller one of 90 mm. The ends have a fillet on the inside.

Inline tube adapter ⌀50 mm to ⌀6 mm in STL 3D format. Length of this fitting is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 15 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.

Straight tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Total length of this coupler is 108 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 60 mm. The ends have no fillet.

Diameter adapter ⌀50 mm to ⌀46 mm in STL format. Final length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 35 mm. The ends are not rounded.

Tube junction ⌀50 mm to ⌀49 mm in STL 3D format. Final length of this adapter is 57 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 26 mm, the smaller one of 26 mm as well. The ends are raw.

Tube junction ⌀50 mm to ⌀40 mm in STL format. Final length of this coupler is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends have no fillet.

Tubing adapter ⌀50 mm to ⌀32 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Inline tube adapter ⌀50 mm to ⌀45 mm in STL format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 30 mm. The ends have no fillet.

Tubing adapter ⌀50 mm to ⌀29 mm in STL format. Final length of this adapter is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 30 mm. The ends are raw.

Inline tube reducer ⌀50 mm to ⌀25 mm in STL format. Length of this reducer is 30 mm. The larger-diameter tube has a thickness of 5 mm and a sleeve length of 10 mm. The smaller-diameter tube has a thickness of 10 mm and a length of 10 mm as well. The ends have no fillet.

Tube reducer ⌀50 mm to ⌀30 mm in STL format. Final length of this connector is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 30 mm. The ends are not rounded.

Tube junction ⌀50 mm to ⌀25 mm in STL format. Final length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to ease the connection.

Tube reducer ⌀50 mm to ⌀32 mm in STL 3D format. Total length of this fitting is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are rounded on the outside to make tube connection easier.

Inline tube reducer ⌀50 mm to ⌀40 mm in STL 3D format. Final length of this fitting is 43 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 15 mm as well. The ends are not rounded.

Inline tube junction ⌀50 mm to ⌀45 mm in STL 3D format. Final length of this connector is 95 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 50 mm. The ends are not rounded.

Tube reducer ⌀50 mm to ⌀20 mm in STL format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet.

Inline tube coupler ⌀50 mm to ⌀20 mm in STL 3D format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 20 mm. The ends are raw.

Straight tube reducer ⌀50 mm to ⌀20 mm in STL 3D format. Total length of this connector is 26 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 8 mm, the smaller one of 8 mm as well. The ends have a fillet.

Tube coupler ⌀51 mm to ⌀35 mm in STL format. Final length of this reducer is 75 mm. The larger-diameter tube has a thickness of 6 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 30 mm as well. The ends are rounded to ease the connection.

Tube reducer ⌀51 mm to ⌀35 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet.

Inline tubing adapter ⌀51 mm to ⌀32 mm in STL 3D format. Length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Diameter adapter ⌀51 mm to ⌀47 mm in STL format. Total length of this sleeve is 30 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends are rounded.

Inline tubing adapter ⌀51 mm to ⌀48 mm in STL format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Inline fitting ⌀52 mm to ⌀45 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 50 mm. The ends have no fillet.