Custom Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 107×52 mm, thickness 3 mm 📦#5451

STL Download STL 1
Create a new model expert
from scratch search for a model
Model in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 107×52 mm. The shell thickness is 3 mm and the total length is 100 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Generation date: 2025-12-28
3D Model Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 107×52 mm, thickness 3 mm

3D model download

Free
  • round-to-rectangular-adapter-d_model5451-nb0_dd{id}.stl : 1.3 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Round to rectangular adapter template, with the following values:
Parameter Value
#1 cylinder outer diameter 100 mm (≃3 15/16 in)
#2 cylinder inlet length 20 mm (≃0.79 in)
#3 rectangle internal length 107 mm (≃4.21 in)
#4 rectangle internal height 52 mm (≃2 1/16 in)
#5 rectangle inlet length 20 mm (≃0.79 in)
#6 offset Z 0 mm (0 in)
#7 offset Y 0 mm (0 in)
#8 total length 100 mm (≃3 15/16 in)
#9 thickness 3 mm (≃1/8 in)
#10 chamfer chamfers on the outside
of the cylindrical tube
and on the inside of
the rectangular tube
Metadata Value
Cylinder internal diameter 94 mm (≃3 11/16 in)
illustration of the parameters
Parameter overview

  • If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
  • The stop at the bottom of the rectangular section has a width equal to half the thickness.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 cylinder outer diameter diaC
#2 cylinder inlet length lentC
#3 rectangle internal length lenIR
#4 rectangle internal height heiIR
#5 rectangle inlet length lentR
#6 offset Z ofsZ
#7 offset Y ofsY
#8 total length lenT
#9 thickness thi
#10 chamfer cha

Related 3D models

To search for a model based on your own parameters, go to the template page Round to rectangular adapter 

Round-to-Rectangular Tube Adapter STL 3D file ⌀107 mm to 110×54 mm, thickness 3 mm (📦 #2839)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀107 mm to 110×54 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular adapter with an external diameter of ⌀107 mm and a rectangular section with internal dimensions 110×54 mm. The wall thickness is 3 mm and the total length is 80 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 107 mm
cylinder inlet length 30 mm
rectangle internal length 110 mm
rectangle internal height 54 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀103 mm to 150×50 mm, thickness 3 mm (📦 #7382)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀103 mm to 150×50 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀103 mm and a rectangular section with inner dimensions 150×50 mm. The wall thickness is 3 mm and the total length is 70 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 103 mm
cylinder inlet length 20 mm
rectangle internal length 150 mm
rectangle internal height 50 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 70 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 60×60 mm, thickness 3 mm (📦 #1511)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 60×60 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 120 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 20 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 120 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 60×60 mm, thickness 3 mm (📦 #1485)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 60×60 mm, thickness 3 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 112.5×50.8 mm, thickness 3 mm (📦 #2073)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 112.5×50.8 mm, thickness 3 mm
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 112.5×50.8 mm. The wall thickness is 3 mm and the overall length is 88 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 38 mm
rectangle internal length 112.5 mm
rectangle internal height 50.8 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 88 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀62 mm to 110×54 mm, thickness 3 mm (📦 #2840)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀62 mm to 110×54 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀62 mm and a rectangular section with internal dimensions 110×54 mm. The wall thickness is 3 mm and the overall length is 80 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 62 mm
cylinder inlet length 30 mm
rectangle internal length 110 mm
rectangle internal height 54 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 100×100 mm, thickness 3 mm (📦 #1756)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 100×100 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular adapter with an external diameter of ⌀110 mm and a rectangular section with internal dimensions 100×100 mm. The shell thickness is 3 mm and the total length is 80 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 110 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 100 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1504)

1 object(s) - format STL (5.0/5) 4 vote(s)
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 80×80 mm, thickness 3 mm
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 119×85 mm, thickness 3 mm (📦 #2243)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 119×85 mm, thickness 3 mm
Download this 3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀110 mm and a rectangular section with internal dimensions 119×85 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 110 mm
cylinder inlet length 10 mm
rectangle internal length 119 mm
rectangle internal height 85 mm
rectangle inlet length 10 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀148 mm to 145.0×70 mm, thickness 3 mm (📦 #2301)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀148 mm to 145.0×70 mm, thickness 3 mm
Model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀148 mm and a rectangular section with internal dimensions 145.0×70 mm. The wall thickness is 3 mm and the total length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 148 mm
cylinder inlet length 25 mm
rectangle internal length 145.0 mm
rectangle internal height 70 mm
rectangle inlet length 25 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm (📦 #9839)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀75 mm and a rectangular section with inner dimensions 150×30 mm. The wall thickness is 3 mm and the overall length is 150 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 25 mm
rectangle internal length 150 mm
rectangle internal height 30 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 150 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀63 mm to 80×80 mm, thickness 3 mm (📦 #2067)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀63 mm to 80×80 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀63 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 63 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm + offset (📦 #1983)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀75 mm and a rectangular section with inner dimensions 150×30 mm. The shell thickness is 3 mm and the total length is 150 mm. The adapter has an offset of 3 mm along the Y axis and 3 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 25 mm
rectangle internal length 150 mm
rectangle internal height 30 mm
rectangle inlet length 30 mm
offset Z 3 mm
offset Y 3 mm
total length 150 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀70 mm to 60×35 mm, thickness 3 mm (📦 #4556)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀70 mm to 60×35 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀70 mm and a rectangular section with inner dimensions 60×35 mm. The wall thickness is 3 mm and the total length is 100 mm. A chamfer is present on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 70 mm
cylinder inlet length 15 mm
rectangle internal length 60 mm
rectangle internal height 35 mm
rectangle inlet length 10 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀56 mm to 80×80 mm, thickness 3 mm (📦 #1845)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀56 mm to 80×80 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀56 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 56 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 110×55 mm, thickness 2 mm + offset (📦 #2320)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 110×55 mm, thickness 2 mm + offset
Download this model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 110×55 mm. The wall thickness is 2 mm and the total length is 63 mm. The adapter has an offset of 8 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 8 mm
offset Y 0 mm
total length 63 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 76×76 mm, thickness 3 mm (📦 #5627)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 76×76 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀80 mm and a rectangular section with internal dimensions 76×76 mm. The wall thickness is 3 mm and the total length is 50 mm. A chamfer is present on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 25 mm
rectangle internal length 76 mm
rectangle internal height 76 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 106×49 mm, thickness 2 mm (📦 #6737)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 106×49 mm, thickness 2 mm
Download this 3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 106×49 mm. The wall thickness is 2 mm and the total length is 90 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 30 mm
rectangle internal length 106 mm
rectangle internal height 49 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 90 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀35 mm to 84.9×35 mm, thickness 3 mm (📦 #6212)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀35 mm to 84.9×35 mm, thickness 3 mm
File in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀35 mm and a rectangular section with inner dimensions 84.9×35 mm. The wall thickness is 3 mm and the overall length is 100 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 35 mm
cylinder inlet length 25 mm
rectangle internal length 84.9 mm
rectangle internal height 35 mm
rectangle inlet length 25 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀48.5 mm to 80×80 mm, thickness 3 mm (📦 #6760)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀48.5 mm to 80×80 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀48.5 mm and a rectangular section with internal dimensions 80×80 mm. The shell thickness is 3 mm and the overall length is 90 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 48.5 mm
cylinder inlet length 25 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 40 mm
offset Z 0 mm
offset Y 0 mm
total length 90 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset (📦 #2323)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀108.7 mm and a rectangular section with internal dimensions 110×55 mm. The shell thickness is 2 mm and the total length is 67 mm. The adapter has an offset of 13 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 108.7 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 13 mm
offset Y 0 mm
total length 67 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 60×60 mm, thickness 2 mm (📦 #1919)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 60×60 mm, thickness 2 mm
Download this 3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 2 mm and the overall length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀83 mm to 79×40 mm, thickness 2 mm (📦 #9212)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀83 mm to 79×40 mm, thickness 2 mm
Download this model in STL format of a round-to-rectangular adapter with an external diameter of ⌀83 mm and a rectangular section with internal dimensions 79×40 mm. The shell thickness is 2 mm and the overall length is 80 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 83 mm
cylinder inlet length 35 mm
rectangle internal length 79 mm
rectangle internal height 40 mm
rectangle inlet length 25 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀30 mm to 84.9×35 mm, thickness 3 mm (📦 #6214)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀30 mm to 84.9×35 mm, thickness 3 mm
Model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀30 mm and a rectangular section with inner dimensions 84.9×35 mm. The shell thickness is 3 mm and the total length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 30 mm
cylinder inlet length 25 mm
rectangle internal length 84.9 mm
rectangle internal height 35 mm
rectangle inlet length 25 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 60×40 mm, thickness 3 mm + offset (📦 #1475)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 60×40 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×40 mm. The shell thickness is 3 mm and the overall length is 100 mm. The adapter has an offset of 10 mm along the Y axis and 10 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 40 mm
rectangle inlet length 30 mm
offset Z 10 mm
offset Y 10 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀30 mm to 82.3×32.7 mm, thickness 3 mm (📦 #6218)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀30 mm to 82.3×32.7 mm, thickness 3 mm
Download this 3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀30 mm and a rectangular section with inner dimensions 82.3×32.7 mm. The shell thickness is 3 mm and the overall length is 100 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 30 mm
cylinder inlet length 25 mm
rectangle internal length 82.3 mm
rectangle internal height 32.7 mm
rectangle inlet length 25 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀72 mm to 100×36 mm, thickness 2 mm (📦 #4797)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀72 mm to 100×36 mm, thickness 2 mm
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀72 mm and a rectangular section with inner dimensions 100×36 mm. The shell thickness is 2 mm and the total length is 100 mm. A chamfer is applied on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 72 mm
cylinder inlet length 25 mm
rectangle internal length 100 mm
rectangle internal height 36 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀77 mm to 80×50 mm, thickness 2 mm + offset (📦 #8623)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀77 mm to 80×50 mm, thickness 2 mm + offset
3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀77 mm and a rectangular section with inner dimensions 80×50 mm. The shell thickness is 2 mm and the overall length is 60 mm. The adapter has an offset of 10 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 77 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 50 mm
rectangle inlet length 20 mm
offset Z 10 mm
offset Y 0 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...