?>

Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 119×85 mm, thickness 3 mm 📦#2243

STL Download STL
Create a new model:
from scratch search for a model
Download this 3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀110 mm and a rectangular section with internal dimensions 119×85 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Generation date: 2025-10-06
3D Model Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 119×85 mm, thickness 3 mm

3D model download

Free
  • round-to-rectangular-adapter-d_model2243-nb0_dd{id}.stl : 1.8 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Round to rectangular adapter template, with the following values:
Parameter Value
#1 cylinder outer diameter 110 mm
#2 cylinder inlet length 10 mm
#3 rectangle internal length 119 mm
#4 rectangle internal height 85 mm
#5 rectangle inlet length 10 mm
#6 offset Z 0 mm
#7 offset Y 0 mm
#8 total length 50 mm
#9 thickness 3 mm
#10 chamfer chamfers on the outside
of the cylindrical tube
and on the inside of
the rectangular tube
illustration of the parameters
Representation of the parameters

  • If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
  • The stop at the bottom of the rectangular section has a width equal to half the thickness.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 cylinder outer diameter diaC
#2 cylinder inlet length lentC
#3 rectangle internal length lenIR
#4 rectangle internal height heiIR
#5 rectangle inlet length lentR
#6 offset Z ofsZ
#7 offset Y ofsY
#8 total length lenT
#9 thickness thi
#10 chamfer cha

Related 3D models

To search for a model based on your own parameters, go to the template page Round to rectangular adapter 

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1504)

1 object(s) - format STL (5.0/5) 2 vote(s)
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 80×80 mm, thickness 3 mm
Download this file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀63 mm to 80×80 mm, thickness 3 mm (📦 #2067)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀63 mm to 80×80 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀63 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 63 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀56 mm to 80×80 mm, thickness 3 mm (📦 #1845)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀56 mm to 80×80 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀56 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the overall length is 50 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 56 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 100×100 mm, thickness 3 mm (📦 #1756)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 100×100 mm, thickness 3 mm
Download this model in STL format of a round-to-rectangular adapter with an external diameter of ⌀110 mm and a rectangular section with internal dimensions 100×100 mm. The shell thickness is 3 mm and the total length is 80 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 110 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 100 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀148 mm to 145.0×70 mm, thickness 3 mm (📦 #2301)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀148 mm to 145.0×70 mm, thickness 3 mm
Model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀148 mm and a rectangular section with internal dimensions 145.0×70 mm. The wall thickness is 3 mm and the total length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 148 mm
cylinder inlet length 25 mm
rectangle internal length 145.0 mm
rectangle internal height 70 mm
rectangle inlet length 25 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 60×60 mm, thickness 3 mm (📦 #1511)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀120 mm to 60×60 mm, thickness 3 mm
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 120 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 20 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 120 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1528)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 80×80 mm, thickness 3 mm
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with internal dimensions 80×80 mm. The wall thickness is 3 mm and the total length is 50 mm. A chamfer is present on the outside of the cylindrical end to ease insertion.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 110×55 mm, thickness 2 mm + offset (📦 #2320)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 110×55 mm, thickness 2 mm + offset
Download this model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 110×55 mm. The wall thickness is 2 mm and the total length is 63 mm. The adapter has an offset of 8 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 8 mm
offset Y 0 mm
total length 63 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 60×60 mm, thickness 3 mm (📦 #1485)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀80 mm to 60×60 mm, thickness 3 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀80 mm and a rectangular section with inner dimensions 60×60 mm. The shell thickness is 3 mm and the overall length is 100 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 112.5×50.8 mm, thickness 3 mm (📦 #2073)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 112.5×50.8 mm, thickness 3 mm
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 112.5×50.8 mm. The wall thickness is 3 mm and the overall length is 88 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 38 mm
rectangle internal length 112.5 mm
rectangle internal height 50.8 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 88 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset (📦 #2323)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀108.7 mm and a rectangular section with internal dimensions 110×55 mm. The shell thickness is 2 mm and the total length is 67 mm. The adapter has an offset of 13 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 108.7 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 13 mm
offset Y 0 mm
total length 67 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀75 mm to 99×101 mm, thickness 2 mm (📦 #1847)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀75 mm to 99×101 mm, thickness 2 mm
Download this 3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀75 mm and a rectangular section with inner dimensions 99×101 mm. The wall thickness is 2 mm and the total length is 65 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 25 mm
rectangle internal length 99 mm
rectangle internal height 101 mm
rectangle inlet length 16 mm
offset Z 0 mm
offset Y 0 mm
total length 65 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 100×45 mm, thickness 2 mm (📦 #1907)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 100×45 mm, thickness 2 mm
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀58 mm and a rectangular section with internal dimensions 100×45 mm. The shell thickness is 2 mm and the overall length is 50 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 58 mm
cylinder inlet length 10 mm
rectangle internal length 100 mm
rectangle internal height 45 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀78 mm to 120×120 mm, thickness 2 mm (📦 #1849)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀78 mm to 120×120 mm, thickness 2 mm
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀78 mm and a rectangular section with internal dimensions 120×120 mm. The shell thickness is 2 mm and the total length is 100 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 78 mm
cylinder inlet length 20 mm
rectangle internal length 120 mm
rectangle internal height 120 mm
rectangle inlet length 20 mm
offset Z 0 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 150×50 mm, thickness 2 mm + offset (📦 #1787)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 150×50 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with internal dimensions 150×50 mm. The shell thickness is 2 mm and the total length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 15 mm
rectangle internal length 150 mm
rectangle internal height 50 mm
rectangle inlet length 10 mm
offset Z 17.5 mm
offset Y 0 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀73 mm to 151×151 mm, thickness 2 mm + offset (📦 #2354)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀73 mm to 151×151 mm, thickness 2 mm + offset
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀73 mm and a rectangular section with inner dimensions 151×151 mm. The wall thickness is 2 mm and the total length is 50 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 73 mm
cylinder inlet length 15 mm
rectangle internal length 151 mm
rectangle internal height 151 mm
rectangle inlet length 5 mm
offset Z 2 mm
offset Y 2 mm
total length 50 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀73 mm to 151×151 mm, thickness 2 mm + offset (📦 #2353)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀73 mm to 151×151 mm, thickness 2 mm + offset
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀73 mm and a rectangular section with inner dimensions 151×151 mm. The shell thickness is 2 mm and the total length is 50 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 73 mm
cylinder inlet length 5 mm
rectangle internal length 151 mm
rectangle internal height 151 mm
rectangle inlet length 15 mm
offset Z 2 mm
offset Y 2 mm
total length 50 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀73 mm to 151×151 mm, thickness 2 mm + offset (📦 #2351)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀73 mm to 151×151 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀73 mm and a rectangular section with internal dimensions 151×151 mm. The wall thickness is 2 mm and the overall length is 60 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 73 mm
cylinder inlet length 15 mm
rectangle internal length 151 mm
rectangle internal height 151 mm
rectangle inlet length 15 mm
offset Z 2 mm
offset Y 2 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀73 mm to 151×151 mm, thickness 2 mm + offset (📦 #2350)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀73 mm to 151×151 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀73 mm and a rectangular section with internal dimensions 151×151 mm. The wall thickness is 2 mm and the total length is 50 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 73 mm
cylinder inlet length 20 mm
rectangle internal length 151 mm
rectangle internal height 151 mm
rectangle inlet length 5 mm
offset Z 2 mm
offset Y 2 mm
total length 50 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 100×50 mm, thickness 3 mm + offset (📦 #1966)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 100×50 mm, thickness 3 mm + offset
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 100×50 mm. The shell thickness is 3 mm and the total length is 100 mm. The adapter has an offset of 3 mm along the Y axis and 3 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 50 mm
rectangle inlet length 30 mm
offset Z 3 mm
offset Y 3 mm
total length 100 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀126.0 mm to 120×70 mm, thickness 3 mm (📦 #2232)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀126.0 mm to 120×70 mm, thickness 3 mm
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀126.0 mm and a rectangular section with inner dimensions 120×70 mm. The wall thickness is 3 mm and the overall length is 50 mm.
Parameter Value Unit
cylinder outer diameter 126.0 mm
cylinder inlet length 15 mm
rectangle internal length 120 mm
rectangle internal height 70 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 60×40 mm, thickness 3 mm + offset (📦 #1475)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀120 mm to 60×40 mm, thickness 3 mm + offset
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×40 mm. The shell thickness is 3 mm and the overall length is 100 mm. The adapter has an offset of 10 mm along the Y axis and 10 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 120 mm
cylinder inlet length 30 mm
rectangle internal length 60 mm
rectangle internal height 40 mm
rectangle inlet length 30 mm
offset Z 10 mm
offset Y 10 mm
total length 100 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀70 mm to 60×30 mm, thickness 2 mm (📦 #1510)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀70 mm to 60×30 mm, thickness 2 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀70 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 2 mm and the total length is 80 mm. A chamfer is present on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 70 mm
cylinder inlet length 10 mm
rectangle internal length 60 mm
rectangle internal height 30 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀90 mm to 50×150 mm, thickness 2 mm + offset (📦 #2292)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀90 mm to 50×150 mm, thickness 2 mm + offset
Model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀90 mm and a rectangular section with internal dimensions 50×150 mm. The wall thickness is 2 mm and the total length is 100 mm. The adapter has an offset of 2 mm along the Y axis and 2 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 90 mm
cylinder inlet length 10 mm
rectangle internal length 50 mm
rectangle internal height 150 mm
rectangle inlet length 10 mm
offset Z 2 mm
offset Y 2 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm + offset (📦 #1983)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀75 mm and a rectangular section with inner dimensions 150×30 mm. The shell thickness is 3 mm and the total length is 150 mm. The adapter has an offset of 3 mm along the Y axis and 3 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 25 mm
rectangle internal length 150 mm
rectangle internal height 30 mm
rectangle inlet length 30 mm
offset Z 3 mm
offset Y 3 mm
total length 150 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀65 mm to 60×30 mm, thickness 2 mm (📦 #1509)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀65 mm to 60×30 mm, thickness 2 mm
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀65 mm and a rectangular section with inner dimensions 60×30 mm. The wall thickness is 2 mm and the overall length is 80 mm. A chamfer is present on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 65 mm
cylinder inlet length 10 mm
rectangle internal length 60 mm
rectangle internal height 30 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 80×80 mm, thickness 3 mm (📦 #1527)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀80 mm to 80×80 mm, thickness 3 mm
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀80 mm and a rectangular section with inner dimensions 80×80 mm. The shell thickness is 3 mm and the overall length is 50 mm.
Parameter Value Unit
cylinder outer diameter 80 mm
cylinder inlet length 15 mm
rectangle internal length 80 mm
rectangle internal height 80 mm
rectangle inlet length 15 mm
offset Z 0 mm
offset Y 0 mm
total length 50 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀126 mm to 145×69.5 mm, thickness 3 mm + offset (📦 #2102)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀126 mm to 145×69.5 mm, thickness 3 mm + offset
Download this 3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀126 mm and a rectangular section with inner dimensions 145×69.5 mm. The wall thickness is 3 mm and the total length is 64.5 mm. The adapter has an offset of 8.0 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 126 mm
cylinder inlet length 20 mm
rectangle internal length 145 mm
rectangle internal height 69.5 mm
rectangle inlet length 11 mm
offset Z 8.0 mm
offset Y 0 mm
total length 64.5 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀60 mm to 60×30 mm, thickness 2 mm (📦 #1508)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀60 mm to 60×30 mm, thickness 2 mm
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀60 mm and a rectangular section with internal dimensions 60×30 mm. The wall thickness is 2 mm and the total length is 80 mm. A chamfer is present on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 10 mm
rectangle internal length 60 mm
rectangle internal height 30 mm
rectangle inlet length 5 mm
offset Z 0 mm
offset Y 0 mm
total length 80 mm
thickness 2 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀99.5 mm to 170×100 mm, thickness 2 mm (📦 #1696)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀99.5 mm to 170×100 mm, thickness 2 mm
Download this file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀99.5 mm and a rectangular section with inner dimensions 170×100 mm. The wall thickness is 2 mm and the overall length is 120 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 99.5 mm
cylinder inlet length 30 mm
rectangle internal length 170 mm
rectangle internal height 100 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 120 mm
thickness 2 mm
chamfer chamfers on ...