?>

Custom Rectangular pipe adapter STL 3D file 110x110 mm to 80x80 mm – transition: 20 mm 📦#3644

STL Download STL 3
Create a new model:
from scratch search for a model
Rectangular tube adapter downloadable as STL 3D file. Side A uses an internal cross-section of 110x110 mm (square), whereas side B is 80x80 mm (square). Both side A and side B sleeves share the same insertion length of 30 mm. The transition section runs for 20 mm and the overall length is 80 mm, sleeves included. The internal edges at the ends are chamfered to help guide the duct during insertion.
Generation date: 2025-11-25
3D Model Rectangular pipe adapter STL 3D file 110x110 mm to 80x80 mm – transition: 20 mm

3D model download

Free
  • rectangular-to-rectangular-duc_model3644-nb0_dd{id}.stl : 2 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - non commercial use - no derivatives)
Safe download

Photos of the model once printed

Rectangular pipe adapter STL 3D file 110x110 mm to 80x80 mm – transition: 20 mm

Values for this model

This model was generated by the Rectangular-to-rectangular duct adapter template, with the following values:
Parameter Value
#1 side A internal width 110 mm (≃4.33 in)
#2 side A internal height 110 mm (≃4.33 in)
#3 sleeve length on side A 30 mm (≃1 3/16 in)
#4 side B internal width 80 mm (≃3.15 in)
#5 side B internal height 80 mm (≃3.15 in)
#6 sleeve length on side B 30 mm (≃1 3/16 in)
#7 thickness 3 mm (≃1/8 in)
#8 transition length 20 mm (≃0.79 in)
#9 Y offset 0 mm (0 in)
#10 Z offset 0 mm (0 in)
#11 end chamfers inside
Metadata Value
external width on side A 116 mm (≃4 9/16 in)
external height on side A 116 mm (≃4 9/16 in)
external width on side B 86 mm (≃3 3/8 in)
external height on side B 86 mm (≃3 3/8 in)
total length 80 mm (≃3.15 in)
illustration of the parameters
Parameter overview

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A internal width widRA
#2 side A internal height heiRA
#3 sleeve length on side A lenSA
#4 side B internal width widRB
#5 side B internal height heiRB
#6 sleeve length on side B lenSB
#7 thickness thi
#8 transition length tra
#9 Y offset ofsY
#10 Z offset ofsZ
#11 end chamfers cha

Related 3D models

To search for a model based on your own parameters, go to the template page Rectangular-to-rectangular duct adapter 

Rectangular duct adapter STL 3D file 200x90 mm to 80x80 mm – transition: 60 mm (📦 #3870)

1 object(s) - format STL
Rectangular duct adapter STL 3D file 200x90 mm to 80x80 mm – transition: 60 mm
Rectangular duct sleeve downloadable as STL 3D file. The internal cross-section on side A is 200x90 mm (rectangular), while side B is 80x80 mm (square). The insertion length on side A is 40 mm, while on side B it is 30 mm. Between the two sleeves, the transition section adds 60 mm, giving an overall length of 130 mm. Wall thickness is generous (4 mm). The ends are left without chamfers, with sharp inner and outer edges.
Parameter Value Unit
side A internal width 200 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 80 mm
side B internal height 80 mm
sleeve length on side B 30 mm
thickness 4 mm
transition length 60 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular pipe adapter STL 3D file 60x60 mm to 60x60 mm – transition: 60 mm (📦 #3738)

1 object(s) - format STL
Rectangular pipe adapter STL 3D file 60x60 mm to 60x60 mm – transition: 60 mm
Rectangular duct transition downloadable as STL 3D file. Both ends have the same internal cross-section, 60x60 mm, with a square shape. The sleeve insertion length is the same on both sides, 20 mm. The transition section runs for 60 mm and the overall length is 100 mm, sleeves included. The shell is thick, with a wall thickness of 4 mm. No chamfers are applied at the ends; both inner and outer edges remain sharp. An offset of 30 mm along the Y axis is applied to side B with respect to side A.
Parameter Value Unit
side A internal width 60 mm
side A internal height 60 mm
sleeve length on side A 20 mm
side B internal width 60 mm
side B internal height 60 mm
sleeve length on side B 20 mm
thickness 4 mm
transition length 60 mm
Y offset 30 mm
Z offset 0 mm
end chamfers none

Rectangular tube adapter STL file 100x40 mm to 80x80 mm – transition: 80 mm (📦 #3771)

1 object(s) - format STL
Rectangular tube adapter STL file 100x40 mm to 80x80 mm – transition: 80 mm
Rectangular duct fitting exported as STL 3D file. Side A offers an internal cross-section of 100x40 mm (rectangular) and side B uses 80x80 mm (square). The sleeve insertion length is the same on both sides, 30 mm. The transition section runs for 80 mm and the overall length is 140 mm, sleeves included. Inner and outer edges at both ends are left unchamfered. Side B is offset by 30 mm along the Y axis and 30 mm along the Z axis relative to side A.
Parameter Value Unit
side A internal width 100 mm
side A internal height 40 mm
sleeve length on side A 30 mm
side B internal width 80 mm
side B internal height 80 mm
sleeve length on side B 30 mm
thickness 3 mm
transition length 80 mm
Y offset 30 mm
Z offset 30 mm
end chamfers none

Rectangle-to-rectangle duct adapter STL 3D file 90x90 mm to 200x90 mm – transition: 100 mm (📦 #3788)

1 object(s) - format STL
Rectangle-to-rectangle duct adapter STL 3D file 90x90 mm to 200x90 mm – transition: 100 mm
Rectangular tube adapter exported as STL 3D file. Side A uses an internal cross-section of 90x90 mm (square), whereas side B is 200x90 mm (rectangular). The sleeve insertion length is the same on both sides, 40 mm. The transition section between the two sides is 100 mm long, for an overall length of 180 mm (side A sleeve, transition and side B sleeve). The shell is very thick, with 6 mm wall thickness. The internal edges at the ends are chamfered to help guide the duct during insertion. Side B is offset by 50 mm along the Y axis relative to side A.
Parameter Value Unit
side A internal width 90 mm
side A internal height 90 mm
sleeve length on side A 40 mm
side B internal width 200 mm
side B internal height 90 mm
sleeve length on side B 40 mm
thickness 6 mm
transition length 100 mm
Y offset 50 mm
Z offset 0 mm
end chamfers inside

Rectangular duct adapter STL 3D file 100x20 mm to 80x20 mm – transition: 20 mm (📦 #3876)

1 object(s) - format STL
Rectangular duct adapter STL 3D file 100x20 mm to 80x20 mm – transition: 20 mm
Rectangular duct connector downloadable as STL 3D file. Side A uses an internal cross-section of 100x20 mm (rectangular), whereas side B is 80x20 mm (rectangular). Each sleeve provides an insertion length of 20 mm. The transition section between the two sides is 20 mm long, for an overall length of 60 mm (side A sleeve, transition and side B sleeve). Inner and outer edges at both ends are left unchamfered.
Parameter Value Unit
side A internal width 100 mm
side A internal height 20 mm
sleeve length on side A 20 mm
side B internal width 80 mm
side B internal height 20 mm
sleeve length on side B 20 mm
thickness 2 mm
transition length 20 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none

Rectangular pipe adapter STL 3D file 60x60 mm to 80x80 mm – transition: 180 mm (📦 #3872)

1 object(s) - format STL
Rectangular pipe adapter STL 3D file 60x60 mm to 80x80 mm – transition: 180 mm
Rectangular conduit adapter exported as STL 3D file. The internal cross-section on side A is 60x60 mm (square), while side B is 80x80 mm (square). The sleeve insertion length is the same on both sides, 10 mm. The transition section between the two sides is 180 mm long, for an overall length of 200 mm (side A sleeve, transition and side B sleeve). The wall is thin, with a thickness of 1 mm. No chamfers are applied at the ends; both inner and outer edges remain sharp.
Parameter Value Unit
side A internal width 60 mm
side A internal height 60 mm
sleeve length on side A 10 mm
side B internal width 80 mm
side B internal height 80 mm
sleeve length on side B 10 mm
thickness 1 mm
transition length 180 mm
Y offset 0 mm
Z offset 0 mm
end chamfers none