?>

Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 172×15 mm, thickness 2 mm + offset 📦#2101

STL Download STL
Create a new model:
from scratch search for a model
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 172×15 mm. The wall thickness is 2 mm and the total length is 180 mm. The adapter has an offset of 47.5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Generation date: 2025-09-30
3D Model Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 172×15 mm, thickness 2 mm + offset

3D model download

Free
  • round-to-rectangular-adapter-d_model2101-nb0_dd{id}.stl : 1.7 Mo
STL Mesh quality : Linear deflection 0.0005 Angular deflection 0.05
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Round to rectangular adapter template, with the following values:
Parameter Value
#1 cylinder outer diameter 100 mm
#2 cylinder inlet length 30 mm
#3 rectangle internal length 172 mm
#4 rectangle internal height 15 mm
#5 rectangle inlet length 30 mm
#6 offset Z 47.5 mm
#7 offset Y 0 mm
#8 total length 180 mm
#9 thickness 2 mm
#10 chamfer chamfers on the outside
of the cylindrical tube
and on the inside of
the rectangular tube
illustration of the parameters
Representation of the parameters

  • If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
  • The stop at the bottom of the rectangular section has a width equal to half the thickness.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 cylinder outer diameter diaC
#2 cylinder inlet length lentC
#3 rectangle internal length lenIR
#4 rectangle internal height heiIR
#5 rectangle inlet length lentR
#6 offset Z ofsZ
#7 offset Y ofsY
#8 total length lenT
#9 thickness thi
#10 chamfer cha

Related 3D models

To search for a model based on your own parameters, go to the template page Round to rectangular adapter 

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 172×15 mm, thickness 2 mm + offset (📦 #2098)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 172×15 mm, thickness 2 mm + offset
3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 172×15 mm. The wall thickness is 2 mm and the total length is 180 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 172 mm
rectangle internal height 15 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 180 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 175×15 mm, thickness 2 mm + offset (📦 #2097)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀100 mm to 175×15 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with inner dimensions 175×15 mm. The shell thickness is 2 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 175 mm
rectangle internal height 15 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×15 mm, thickness 2 mm + offset (📦 #2096)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×15 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 200×15 mm. The shell thickness is 2 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 15 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×25 mm, thickness 2 mm + offset (📦 #2095)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×25 mm, thickness 2 mm + offset
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 200×25 mm. The shell thickness is 2 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 25 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×40 mm, thickness 2 mm + offset (📦 #2104)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×40 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 200×40 mm. The wall thickness is 2 mm and the overall length is 105 mm. The adapter has an offset of 30 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 25 mm
rectangle internal length 200 mm
rectangle internal height 40 mm
rectangle inlet length 20 mm
offset Z 30 mm
offset Y 0 mm
total length 105 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀92 mm to 228×80 mm, thickness 2 mm + offset (📦 #1809)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀92 mm to 228×80 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀92 mm and a rectangular section with internal dimensions 228×80 mm. The wall thickness is 2 mm and the overall length is 235 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 92 mm
cylinder inlet length 30 mm
rectangle internal length 228 mm
rectangle internal height 80 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 235 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 235×80 mm, thickness 2 mm + offset (📦 #1752)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 235×80 mm, thickness 2 mm + offset
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀150 mm and a rectangular section with inner dimensions 235×80 mm. The shell thickness is 2 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 30 mm
rectangle internal length 235 mm
rectangle internal height 80 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 235×80 mm, thickness 2 mm + offset (📦 #1751)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀150 mm to 235×80 mm, thickness 2 mm + offset
3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with inner dimensions 235×80 mm. The wall thickness is 2 mm and the total length is 235 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 30 mm
rectangle internal length 235 mm
rectangle internal height 80 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 235 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀101.6 mm to 220×76.2 mm, thickness 2 mm + offset (📦 #1760)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀101.6 mm to 220×76.2 mm, thickness 2 mm + offset
3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀101.6 mm and a rectangular section with internal dimensions 220×76.2 mm. The shell thickness is 2 mm and the overall length is 240 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 101.6 mm
cylinder inlet length 50 mm
rectangle internal length 220 mm
rectangle internal height 76.2 mm
rectangle inlet length 50 mm
offset Z 60 mm
offset Y 0 mm
total length 240 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 150×48 mm, thickness 2 mm + offset (📦 #1865)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀58 mm to 150×48 mm, thickness 2 mm + offset
Download this model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀58 mm and a rectangular section with internal dimensions 150×48 mm. The wall thickness is 2 mm and the overall length is 100 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 58 mm
cylinder inlet length 30 mm
rectangle internal length 150 mm
rectangle internal height 48 mm
rectangle inlet length 30 mm
offset Z 15 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀99 mm to 300×50 mm, thickness 2 mm + offset (📦 #2030)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀99 mm to 300×50 mm, thickness 2 mm + offset
Download this 3D model in STL format of a round-to-rectangular adapter with an external diameter of ⌀99 mm and a rectangular section with inner dimensions 300×50 mm. The shell thickness is 2 mm and the total length is 200 mm. The adapter has an offset of 45 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 99 mm
cylinder inlet length 50 mm
rectangle internal length 300 mm
rectangle internal height 50 mm
rectangle inlet length 60 mm
offset Z 45 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×60 mm, thickness 3 mm + offset (📦 #1747)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 200×60 mm, thickness 3 mm + offset
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 200×60 mm. The shell thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀122 mm to 220×90 mm, thickness 3 mm + offset (📦 #2158)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀122 mm to 220×90 mm, thickness 3 mm + offset
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀122 mm and a rectangular section with internal dimensions 220×90 mm. The wall thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 30 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 122 mm
cylinder inlet length 25 mm
rectangle internal length 220 mm
rectangle internal height 90 mm
rectangle inlet length 35 mm
offset Z 30 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀90 mm to 200×60 mm, thickness 3 mm + offset (📦 #1897)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀90 mm to 200×60 mm, thickness 3 mm + offset
Download this 3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀90 mm and a rectangular section with internal dimensions 200×60 mm. The wall thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end.
Parameter Value Unit
cylinder outer diameter 90 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀125 mm to 200×60 mm, thickness 3 mm + offset (📦 #1676)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀125 mm to 200×60 mm, thickness 3 mm + offset
Download this 3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀125 mm and a rectangular section with internal dimensions 200×60 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end.
Parameter Value Unit
cylinder outer diameter 125 mm
cylinder inlet length 30 mm
rectangle internal length 200 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×48 mm, thickness 2 mm + offset (📦 #1862)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×48 mm, thickness 2 mm + offset
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀60 mm and a rectangular section with internal dimensions 100×48 mm. The shell thickness is 2 mm and the overall length is 100 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 48 mm
rectangle inlet length 30 mm
offset Z 15 mm
offset Y 0 mm
total length 100 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀115 mm to 196×20 mm, thickness 2 mm + offset (📦 #2116)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀115 mm to 196×20 mm, thickness 2 mm + offset
Download this 3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀115 mm and a rectangular section with internal dimensions 196×20 mm. The shell thickness is 2 mm and the overall length is 200 mm. The adapter has an offset of 53 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 115 mm
cylinder inlet length 40 mm
rectangle internal length 196 mm
rectangle internal height 20 mm
rectangle inlet length 53 mm
offset Z 53 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×50 mm, thickness 2 mm + offset (📦 #1858)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×50 mm, thickness 2 mm + offset
Download this 3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀60 mm and a rectangular section with internal dimensions 100×50 mm. The shell thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 50 mm
rectangle internal length 100 mm
rectangle internal height 50 mm
rectangle inlet length 46 mm
offset Z 15 mm
offset Y 0 mm
total length 150 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀42 mm to 120×80 mm, thickness 2 mm + offset (📦 #1863)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀42 mm to 120×80 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀42 mm and a rectangular section with inner dimensions 120×80 mm. The wall thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 25 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 42 mm
cylinder inlet length 50 mm
rectangle internal length 120 mm
rectangle internal height 80 mm
rectangle inlet length 50 mm
offset Z 25 mm
offset Y 0 mm
total length 150 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×45 mm, thickness 2 mm + offset (📦 #1869)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀60 mm to 100×45 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀60 mm and a rectangular section with inner dimensions 100×45 mm. The wall thickness is 2 mm and the total length is 90 mm. The adapter has an offset of 15 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 60 mm
cylinder inlet length 30 mm
rectangle internal length 100 mm
rectangle internal height 45 mm
rectangle inlet length 30 mm
offset Z 15 mm
offset Y 0 mm
total length 90 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 100×50 mm, thickness 3 mm + offset (📦 #1538)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 100×50 mm, thickness 3 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with inner dimensions 100×50 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 50 mm along the Z axis. A chamfer is present on the outside of the cylindrical end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 25 mm
rectangle internal length 100 mm
rectangle internal height 50 mm
rectangle inlet length 50 mm
offset Z 50 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer chamfer on t...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 150×30 mm, thickness 3 mm + offset (📦 #2050)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 150×30 mm, thickness 3 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 150×30 mm. The wall thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 30 mm
rectangle internal length 150 mm
rectangle internal height 30 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset (📦 #2323)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀108.7 mm to 110×55 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀108.7 mm and a rectangular section with internal dimensions 110×55 mm. The shell thickness is 2 mm and the total length is 67 mm. The adapter has an offset of 13 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
Parameter Value Unit
cylinder outer diameter 108.7 mm
cylinder inlet length 20 mm
rectangle internal length 110 mm
rectangle internal height 55 mm
rectangle inlet length 20 mm
offset Z 13 mm
offset Y 0 mm
total length 67 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 196×86 mm, thickness 2 mm + offset (📦 #2293)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀100 mm to 196×86 mm, thickness 2 mm + offset
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 196×86 mm. The shell thickness is 2 mm and the total length is 200 mm. The adapter has an offset of 53 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 100 mm
cylinder inlet length 40 mm
rectangle internal length 196 mm
rectangle internal height 86 mm
rectangle inlet length 53 mm
offset Z 53 mm
offset Y 0 mm
total length 200 mm
thickness 2 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀76 mm to 200×20 mm, thickness 3 mm + offset (📦 #2057)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀76 mm to 200×20 mm, thickness 3 mm + offset
Download this 3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀76 mm and a rectangular section with inner dimensions 200×20 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 40 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 76 mm
cylinder inlet length 20 mm
rectangle internal length 200 mm
rectangle internal height 20 mm
rectangle inlet length 20 mm
offset Z 40 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm + offset (📦 #1983)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀75 mm to 150×30 mm, thickness 3 mm + offset
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀75 mm and a rectangular section with inner dimensions 150×30 mm. The shell thickness is 3 mm and the total length is 150 mm. The adapter has an offset of 3 mm along the Y axis and 3 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 25 mm
rectangle internal length 150 mm
rectangle internal height 30 mm
rectangle inlet length 30 mm
offset Z 3 mm
offset Y 3 mm
total length 150 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀99.5 mm to 170×100 mm, thickness 2 mm (📦 #1691)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀99.5 mm to 170×100 mm, thickness 2 mm
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀99.5 mm and a rectangular section with internal dimensions 170×100 mm. The shell thickness is 2 mm and the total length is 180 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 99.5 mm
cylinder inlet length 30 mm
rectangle internal length 170 mm
rectangle internal height 100 mm
rectangle inlet length 30 mm
offset Z 0 mm
offset Y 0 mm
total length 180 mm
thickness 2 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 150×60 mm, thickness 3 mm + offset (📦 #1643)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round-to-Rectangular Tube Adapter STL file ⌀110 mm to 150×60 mm, thickness 3 mm + offset
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀110 mm and a rectangular section with inner dimensions 150×60 mm. The wall thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
Parameter Value Unit
cylinder outer diameter 110 mm
cylinder inlet length 30 mm
rectangle internal length 150 mm
rectangle internal height 60 mm
rectangle inlet length 30 mm
offset Z 60 mm
offset Y 0 mm
total length 200 mm
thickness 3 mm
chamfer no chamfer

Round-to-Rectangular Tube Adapter STL 3D file ⌀75 mm to 125×22 mm, thickness 3 mm + offset (📦 #1985)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL 3D file ⌀75 mm to 125×22 mm, thickness 3 mm + offset
Download this 3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀75 mm and a rectangular section with inner dimensions 125×22 mm. The shell thickness is 3 mm and the overall length is 125 mm. The adapter has an offset of 12.5 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 75 mm
cylinder inlet length 50 mm
rectangle internal length 125 mm
rectangle internal height 22 mm
rectangle inlet length 50 mm
offset Z 12.5 mm
offset Y 0 mm
total length 125 mm
thickness 3 mm
chamfer chamfers on ...

Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 150×50 mm, thickness 2 mm + offset (📦 #1787)

1 object(s) - format STL
Round-to-Rectangular Tube Adapter STL file ⌀150 mm to 150×50 mm, thickness 2 mm + offset
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with internal dimensions 150×50 mm. The shell thickness is 2 mm and the total length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
Parameter Value Unit
cylinder outer diameter 150 mm
cylinder inlet length 15 mm
rectangle internal length 150 mm
rectangle internal height 50 mm
rectangle inlet length 10 mm
offset Z 17.5 mm
offset Y 0 mm
total length 60 mm
thickness 2 mm
chamfer chamfers on ...