Round-to-Rectangular Tube Adapter ⌀150 mm to 235×80 mm, thickness 2 mm + offset 📦#1752
Generation date: 2025-09-12
3D model download
Free- round-to-rectangular-adapter-d_model1752-nb0_dd{id}.stl : 1.9 Mo
STL
Mesh quality :
0.0005
0.05
License: ITE IPU v1.0 - Iteration3d
(Internal and private use, non-commercial – no distribution – no derivatives)
Values for this model
This model was generated by the Round to rectangular adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | cylinder outer diameter | 150 mm |
| #2 | cylinder inlet length | 30 mm |
| #3 | rectangle internal length | 235 mm |
| #4 | rectangle internal height | 80 mm |
| #5 | rectangle inlet length | 30 mm |
| #6 | offset Z | 60 mm |
| #7 | offset Y | 0 mm |
| #8 | total length | 200 mm |
| #9 | thickness | 2 mm |
| #10 | chamfer | chamfers on the outside of the cylindrical tube and on the inside of the rectangular tube |
Representation of the parameters
- If the chamfer option on the ends is enabled, the chamfer length is equal to half the thickness.
- The stop at the bottom of the rectangular section has a width equal to half the thickness.
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 cylinder outer diameter | diaC |
| #2 cylinder inlet length | lentC |
| #3 rectangle internal length | lenIR |
| #4 rectangle internal height | heiIR |
| #5 rectangle inlet length | lentR |
| #6 offset Z | ofsZ |
| #7 offset Y | ofsY |
| #8 total length | lenT |
| #9 thickness | thi |
| #10 chamfer | cha |
Related 3D models
To search for a model based on your own parameters, go to the template page Round to rectangular adapter
Round-to-Rectangular Tube Adapter ⌀150 mm to 235×80 mm, thickness 2 mm + offset (📦 #1751)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with inner dimensions 235×80 mm. The wall thickness is 2 mm and the total length is 235 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 150 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 235 | mm |
| rectangle internal height | 80 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 235 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀92 mm to 228×80 mm, thickness 2 mm + offset (📦 #1809)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀92 mm and a rectangular section with internal dimensions 228×80 mm. The wall thickness is 2 mm and the overall length is 235 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 92 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 228 | mm |
| rectangle internal height | 80 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 235 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀101.6 mm to 220×76.2 mm, thickness 2 mm + offset (📦 #1760)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀101.6 mm and a rectangular section with internal dimensions 220×76.2 mm. The shell thickness is 2 mm and the overall length is 240 mm. The adapter has an offset of 60 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 10... | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 220 | mm |
| rectangle internal height | 76.2 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 240 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀125 mm to 200×60 mm, thickness 3 mm + offset (📦 #1676)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀125 mm and a rectangular section with internal dimensions 200×60 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 125 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 200×60 mm, thickness 3 mm + offset (📦 #1747)
1 object(s) - format STL
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 200×60 mm. The shell thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀99.5 mm to 170×100 mm, thickness 2 mm (📦 #1691)
1 object(s) - format STL
Download this 3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀99.5 mm and a rectangular section with internal dimensions 170×100 mm. The shell thickness is 2 mm and the total length is 180 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 99.5 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 170 | mm |
| rectangle internal height | 100 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 180 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀150 mm to 100×50 mm, thickness 3 mm + offset (📦 #1538)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with inner dimensions 100×50 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 50 mm along the Z axis. A chamfer is present on the outside of the cylindrical end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 150 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 100 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 50 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀150 mm to 200×60 mm, thickness 3 mm + offset (📦 #1521)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀150 mm and a rectangular section with inner dimensions 200×60 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 150 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀125 mm to 200×60 mm, thickness 3 mm + offset (📦 #1496)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀125 mm and a rectangular section with inner dimensions 200×60 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 125 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀120 mm to 200×60 mm, thickness 3 mm + offset (📦 #1533)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀120 mm and a rectangular section with internal dimensions 200×60 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀99.5 mm to 170×100 mm, thickness 2 mm (📦 #1696)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀99.5 mm and a rectangular section with inner dimensions 170×100 mm. The wall thickness is 2 mm and the overall length is 120 mm. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 99.5 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 170 | mm |
| rectangle internal height | 100 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀150 mm to 150×50 mm, thickness 2 mm + offset (📦 #1787)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀150 mm and a rectangular section with internal dimensions 150×50 mm. The shell thickness is 2 mm and the total length is 60 mm. The adapter has an offset of 17.5 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 150 | mm |
| cylinder inlet length | 15 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 10 | mm |
| offset Z | 17.5 | mm |
| offset Y | 0 | mm |
| total length | 60 | mm |
| thickness | 2 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀110 mm to 150×60 mm, thickness 3 mm + offset (📦 #1643)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀110 mm and a rectangular section with inner dimensions 150×60 mm. The wall thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 110 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀210 mm to 200×60 mm, thickness 3 mm + offset (📦 #1539)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀210 mm and a rectangular section with inner dimensions 200×60 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 210 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 200 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀98 mm to 300×50 mm, thickness 2 mm + offset (📦 #1583)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀98 mm and a rectangular section with internal dimensions 300×50 mm. The shell thickness is 2 mm and the overall length is 200 mm. The adapter has an offset of 45 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 98 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 300 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 60 | mm |
| offset Z | 45 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀99.5 mm to 170×100 mm, thickness 3 mm (📦 #1692)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀99.5 mm and a rectangular section with inner dimensions 170×100 mm. The wall thickness is 3 mm and the total length is 180 mm. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 99.5 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 170 | mm |
| rectangle internal height | 100 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 180 | mm |
| thickness | 3 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀128 mm to 60×110 mm, thickness 3 mm + offset (📦 #1784)
1 object(s) - format STL
Download this file in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀128 mm and a rectangular section with inner dimensions 60×110 mm. The wall thickness is 3 mm and the total length is 200 mm. The adapter has an offset of 40 mm along the Z axis. A chamfer is present on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 128 | mm |
| cylinder inlet length | 60 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 110 | mm |
| rectangle inlet length | 60 | mm |
| offset Z | 40 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 2 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 180×100.2 mm, thickness 3 mm + offset (📦 #1779)
1 object(s) - format STL
Model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 180×100.2 mm. The shell thickness is 3 mm and the total length is 240 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 180 | mm |
| rectangle internal height | 10... | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 240 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 180×100.2 mm, thickness 3 mm + offset (📦 #1780)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀100 mm and a rectangular section with internal dimensions 180×100.2 mm. The wall thickness is 3 mm and the overall length is 190 mm. The adapter has an offset of 45 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 180 | mm |
| rectangle internal height | 10... | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 45 | mm |
| offset Y | 0 | mm |
| total length | 190 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀110 mm to 220×220 mm, thickness 3 mm + offset (📦 #1649)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀110 mm and a rectangular section with inner dimensions 220×220 mm. The wall thickness is 3 mm and the overall length is 120 mm. The adapter has an offset of 20 mm along the Z axis. Chamfers are applied on the outside of the cylindrical end and on the inside of the rectangular end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 110 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 220 | mm |
| rectangle internal height | 220 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 20 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 3 | mm |
| chamfer | 3 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 150×50 mm, thickness 2 mm (📦 #1616)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀100 mm and a rectangular section with inner dimensions 150×50 mm. The wall thickness is 2 mm and the overall length is 150 mm. A chamfer is applied on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 40 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀110 mm to 150×80 mm, thickness 3 mm + offset (📦 #1646)
1 object(s) - format STL
Model in STL format of a round-to-rectangular adapter with an outer diameter of ⌀110 mm and a rectangular section with internal dimensions 150×80 mm. The wall thickness is 3 mm and the overall length is 120 mm. The adapter has an offset of 30 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 110 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 150 | mm |
| rectangle internal height | 80 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 30 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀120 mm to 60×60 mm, thickness 3 mm + offset (📦 #1482)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with internal dimensions 60×60 mm. The wall thickness is 3 mm and the total length is 150 mm. The adapter has an offset of 45 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 60 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 45 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 3 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀260 mm to 100×50 mm, thickness 3 mm + offset (📦 #1540)
1 object(s) - format STL
File in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀260 mm and a rectangular section with internal dimensions 100×50 mm. The shell thickness is 3 mm and the overall length is 200 mm. The adapter has an offset of 50 mm along the Z axis. A chamfer is applied on the outside of the cylindrical end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 260 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 100 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 50 | mm |
| offset Y | 0 | mm |
| total length | 200 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀85 mm to 105×50 mm, thickness 2 mm + offset (📦 #1655)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀85 mm and a rectangular section with internal dimensions 105×50 mm. The wall thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 23 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 85 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 46 | mm |
| offset Z | 23 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀116 mm to 250×40 mm, thickness 2 mm (📦 #1535)
1 object(s) - format STL
3D file in STL format of a round-to-rectangular adapter with an outer diameter of ⌀116 mm and a rectangular section with internal dimensions 250×40 mm. The shell thickness is 2 mm and the total length is 250 mm.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 116 | mm |
| cylinder inlet length | 25 | mm |
| rectangle internal length | 250 | mm |
| rectangle internal height | 40 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 0 | mm |
| offset Y | 0 | mm |
| total length | 250 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀110 mm to 220×220 mm, thickness 3 mm + offset (📦 #1648)
1 object(s) - format STL
3D model in STL format of a round-to-rectangular tube adapter with an external diameter of ⌀110 mm and a rectangular section with internal dimensions 220×220 mm. The shell thickness is 3 mm and the total length is 120 mm. The adapter has an offset of 20 mm along the Z axis. A chamfer is present on the outside of the cylindrical end.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 110 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 220 | mm |
| rectangle internal height | 220 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 20 | mm |
| offset Y | 0 | mm |
| total length | 120 | mm |
| thickness | 3 | mm |
| chamfer | 1 |
Round-to-Rectangular Tube Adapter ⌀100 mm to 17.8×10.2 mm, thickness 2 mm + offset (📦 #1778)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an outer diameter of ⌀100 mm and a rectangular section with internal dimensions 17.8×10.2 mm. The shell thickness is 2 mm and the overall length is 240 mm. The adapter has an offset of 60 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 100 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 17.8 | mm |
| rectangle internal height | 10.2 | mm |
| rectangle inlet length | 50 | mm |
| offset Z | 60 | mm |
| offset Y | 0 | mm |
| total length | 240 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round-to-Rectangular Tube Adapter ⌀85 mm to 105×50 mm, thickness 2 mm + offset (📦 #1656)
1 object(s) - format STL
Download this model in STL format of a round-to-rectangular tube adapter with an outer diameter of ⌀85 mm and a rectangular section with internal dimensions 105×50 mm. The shell thickness is 2 mm and the overall length is 150 mm. The adapter has an offset of 15 mm along the Z axis.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 85 | mm |
| cylinder inlet length | 50 | mm |
| rectangle internal length | 105 | mm |
| rectangle internal height | 50 | mm |
| rectangle inlet length | 46 | mm |
| offset Z | 15 | mm |
| offset Y | 0 | mm |
| total length | 150 | mm |
| thickness | 2 | mm |
| chamfer | 0 |
Round to Rectangular Adapter ⌀120 mm to 60×40 mm, thickness 3 mm + offset (📦 #1475)
1 object(s) - format STL
File in STL format of a round-to-rectangular adapter with an external diameter of ⌀120 mm and a rectangular section with inner dimensions 60×40 mm. The shell thickness is 3 mm and the overall length is 100 mm. The adapter has an offset of 10 mm along the Y axis and 10 mm along the Z axis. Chamfers are present on the outside of the cylindrical end and on the inside of the rectangular end to ease insertion.
| Parameter | Value | Unit |
|---|---|---|
| cylinder outer diameter | 120 | mm |
| cylinder inlet length | 30 | mm |
| rectangle internal length | 60 | mm |
| rectangle internal height | 40 | mm |
| rectangle inlet length | 30 | mm |
| offset Z | 10 | mm |
| offset Y | 10 | mm |
| total length | 100 | mm |
| thickness | 3 | mm |
| chamfer | 3 |