?>

Pipe elbow STL 3D file 180° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm 📦#2015

STL Download STL
Create a new model:
from scratch search for a model
Model of a pipe elbow with a 180° angle in STL format. This pipe elbow features an outer diameter of 40 mm and an inner diameter of 36 mm. The tube thickness is therefore 2 mm.
Generation date: 2025-09-26
3D Model Pipe elbow STL 3D file 180° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm

3D model download

Free
  • pipe-elbow-ouD40mm-inD36mm-deg_model2015-nb0_dd{id}.stl : 1.6 Mo
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 40 mm
#2 inner diameter 36 mm
#3 angle 180 °
#4 end fillets no
illustration of the parameters
Representation of the parameters

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Pipe elbow STL file 170° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm (📦 #1385)

1 object(s) - format STL
Pipe elbow STL file 170° ⌀OD: 45 mm ⌀ID: 43 mm thickness: 1 mm
3D model of an elbow with a 170° angle in STL format. This elbow has an external diameter of 45 mm and an internal diameter of 43 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 45 mm
inner diameter 43 mm
angle 170 °
end fillets no

Pipe elbow STL 3D file 180° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm (📦 #1650)

1 object(s) - format STL
Pipe elbow STL 3D file 180° ⌀OD: 20 mm ⌀ID: 18 mm thickness: 1 mm
3D file of an elbow with a 180° angle in STL format. This elbow features an external diameter of 20 mm and an internal diameter of 18 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 20 mm
inner diameter 18 mm
angle 180 °
end fillets no

Pipe elbow STL 3D file 180° ⌀OD: 20 mm ⌀ID: 16 mm thickness: 2 mm (📦 #1379)

1 object(s) - format STL (5.0/5) 2 vote(s)
Pipe elbow STL 3D file 180° ⌀OD: 20 mm ⌀ID: 16 mm thickness: 2 mm
Model of a pipe elbow with a 180° angle in STL format. This elbow has an external diameter of 20 mm and an internal diameter of 16 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 20 mm
inner diameter 16 mm
angle 180 °
end fillets no

Pipe elbow STL 3D file 180° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1350)

1 object(s) - format STL
Pipe elbow STL 3D file 180° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
File of an elbow with a 180° angle in STL format. This elbow has an external diameter of 18 mm and an internal diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 180 °
end fillets no

Pipe elbow STL file 120° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1368)

1 object(s) - format STL (5.0/5) 1 vote(s)
Pipe elbow STL file 120° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
File of an elbow with a 120° angle in STL format. This elbow features an external diameter of 40 mm and an internal diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 120 °
end fillets no

Pipe elbow STL 3D file 118° ⌀OD: 25 mm ⌀ID: 16 mm thickness: 4.5 mm (📦 #1661)

1 object(s) - format STL
Pipe elbow STL 3D file 118° ⌀OD: 25 mm ⌀ID: 16 mm thickness: 4.5 mm
3D model of a pipe elbow with a 118° angle in STL format. This pipe elbow features an external diameter of 25 mm and an internal diameter of 16 mm. The tube thickness is therefore 4.5 mm.
Parameter Value Unit
outer diameter 25 mm
inner diameter 16 mm
angle 118 °
end fillets no

Pipe elbow STL file 120° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm (📦 #2142)

1 object(s) - format STL
Pipe elbow STL file 120° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm
3D model of an elbow with a 120° angle in STL format. This pipe elbow has an outer diameter of 18 mm and an inner diameter of 15 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 15 mm
angle 120 °
end fillets no

Pipe elbow STL 3D file 115° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1480)

1 object(s) - format STL
Pipe elbow STL 3D file 115° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D file of a pipe elbow with a 115° angle in STL format. This pipe elbow has an external diameter of 18 mm and an internal diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 115 °
end fillets no

Pipe elbow STL file 100° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm (📦 #1947)

1 object(s) - format STL
Pipe elbow STL file 100° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm
Model of a pipe elbow with a 100° angle in STL format. This pipe elbow has an outer diameter of 32 mm and an inner diameter of 30 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 30 mm
angle 100 °
end fillets no

Pipe elbow STL 3D file 100° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1487)

1 object(s) - format STL
Pipe elbow STL 3D file 100° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
3D model of an elbow with a 100° angle in STL format. This pipe elbow has an outer diameter of 18 mm and an inner diameter of 16 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 100 °
end fillets no

Pipe elbow STL 3D file 170° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm (📦 #1392)

1 object(s) - format STL
Pipe elbow STL 3D file 170° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm
File of an elbow with a 170° angle in STL format. This elbow features an external diameter of 40 mm and an internal diameter of 36 mm. The tube thickness is therefore 2 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 40 mm
inner diameter 36 mm
angle 170 °
end fillets yes

Pipe elbow STL file 170° ⌀OD: 45 mm ⌀ID: 41 mm thickness: 2 mm (📦 #1386)

1 object(s) - format STL
Pipe elbow STL file 170° ⌀OD: 45 mm ⌀ID: 41 mm thickness: 2 mm
Model of an elbow with a 170° angle in STL format. This elbow has an external diameter of 45 mm and an internal diameter of 41 mm. This results in a tube thickness of 2 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 45 mm
inner diameter 41 mm
angle 170 °
end fillets yes

Pipe elbow STL file 90° ⌀OD: 40 mm ⌀ID: 35 mm thickness: 2.5 mm (📦 #2162)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 40 mm ⌀ID: 35 mm thickness: 2.5 mm
Model of a pipe elbow with a 90° angle in STL format. This elbow has an outer diameter of 40 mm and an inner diameter of 35 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 35 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1367)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 38 mm ⌀ID: 35 mm thickness: 1.5 mm (📦 #2344)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 38 mm ⌀ID: 35 mm thickness: 1.5 mm
Model of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 38 mm and an inner diameter of 35 mm. The tube thickness is therefore 1.5 mm.
Parameter Value Unit
outer diameter 38 mm
inner diameter 35 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 180° ⌀OD: 20 mm ⌀ID: 16 mm thickness: 2 mm (📦 #1532)

1 object(s) - format STL
Pipe elbow STL 3D file 180° ⌀OD: 20 mm ⌀ID: 16 mm thickness: 2 mm
File of an elbow with a 180° angle in STL format. This elbow features an external diameter of 20 mm and an internal diameter of 16 mm. This results in a tube thickness of 2 mm. End fillets make it easier to assemble.
Parameter Value Unit
outer diameter 20 mm
inner diameter 16 mm
angle 180 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm (📦 #1552)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 43 mm ⌀ID: 39.2 mm thickness: 1.9 mm
3D file of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 43 mm and an inner diameter of 39.2 mm. This results in a tube thickness of 1.9 mm.
Parameter Value Unit
outer diameter 43 mm
inner diameter 39.2 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 45.7 mm ⌀ID: 40.7 mm thickness: 2.5 mm (📦 #2051)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 45.7 mm ⌀ID: 40.7 mm thickness: 2.5 mm
3D model of a pipe elbow with a 90° angle in STL format. This pipe elbow features an outer diameter of 45.7 mm and an inner diameter of 40.7 mm. The tube thickness is therefore 2.5 mm.
Parameter Value Unit
outer diameter 45.7 mm
inner diameter 40.7 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 180° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1530)

1 object(s) - format STL
Pipe elbow STL 3D file 180° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
Model of an elbow with a 180° angle in STL format. This elbow features an outer diameter of 18 mm and an inner diameter of 16 mm. This results in a tube thickness of 1 mm. The ends feature fillets to make it easier to insert.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 180 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 47 mm ⌀ID: 43 mm thickness: 2 mm (📦 #1902)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 47 mm ⌀ID: 43 mm thickness: 2 mm
3D model of a pipe elbow with a 90° angle in STL format. This elbow has an external diameter of 47 mm and an internal diameter of 43 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 47 mm
inner diameter 43 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm (📦 #2125)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 32 mm and an inner diameter of 30 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 30 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm (📦 #1403)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 28 mm ⌀ID: 26 mm thickness: 1 mm
File of an elbow with a 90° angle in STL format. This elbow features an external diameter of 28 mm and an internal diameter of 26 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 28 mm
inner diameter 26 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm (📦 #1824)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 27 mm ⌀ID: 25 mm thickness: 1 mm
Model of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 27 mm and an inner diameter of 25 mm. The tube thickness is therefore 1 mm.
Parameter Value Unit
outer diameter 27 mm
inner diameter 25 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 165° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm (📦 #1640)

1 object(s) - format STL
Pipe elbow STL 3D file 165° ⌀OD: 18 mm ⌀ID: 16 mm thickness: 1 mm
File of a pipe elbow with a 165° angle in STL format. This pipe elbow has an external diameter of 18 mm and an internal diameter of 16 mm. The tube thickness is therefore 1 mm. End fillets make it easier to insert.
Parameter Value Unit
outer diameter 18 mm
inner diameter 16 mm
angle 165 °
end fillets yes

Pipe elbow STL 3D file 90° ⌀OD: 60 mm ⌀ID: 30 mm thickness: 15 mm (📦 #2314)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 60 mm ⌀ID: 30 mm thickness: 15 mm
File of a pipe elbow with a 90° angle in STL format. This elbow features an external diameter of 60 mm and an internal diameter of 30 mm. This results in a tube thickness of 15 mm.
Parameter Value Unit
outer diameter 60 mm
inner diameter 30 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm (📦 #1444)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 26 mm ⌀ID: 21 mm thickness: 2.5 mm
3D file of a pipe elbow with a 90° angle in STL format. This pipe elbow has an outer diameter of 26 mm and an inner diameter of 21 mm. This results in a tube thickness of 2.5 mm.
Parameter Value Unit
outer diameter 26 mm
inner diameter 21 mm
angle 90 °
end fillets no

Pipe elbow STL 3D file 90° ⌀OD: 60 mm ⌀ID: 28 mm thickness: 16 mm (📦 #2280)

1 object(s) - format STL
Pipe elbow STL 3D file 90° ⌀OD: 60 mm ⌀ID: 28 mm thickness: 16 mm
3D file of an elbow with a 90° angle in STL format. This pipe elbow features an external diameter of 60 mm and an internal diameter of 28 mm. The tube thickness is therefore 16 mm.
Parameter Value Unit
outer diameter 60 mm
inner diameter 28 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 60 mm ⌀ID: 27 mm thickness: 16.5 mm (📦 #2282)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 60 mm ⌀ID: 27 mm thickness: 16.5 mm
3D model of a pipe elbow with a 90° angle in STL format. This elbow has an outer diameter of 60 mm and an inner diameter of 27 mm. This results in a tube thickness of 16.5 mm.
Parameter Value Unit
outer diameter 60 mm
inner diameter 27 mm
angle 90 °
end fillets no

Pipe elbow STL file 90° ⌀OD: 60 mm ⌀ID: 26 mm thickness: 17 mm (📦 #2281)

1 object(s) - format STL
Pipe elbow STL file 90° ⌀OD: 60 mm ⌀ID: 26 mm thickness: 17 mm
File of an elbow with a 90° angle in STL format. This elbow has an outer diameter of 60 mm and an inner diameter of 26 mm. The tube thickness is therefore 17 mm.
Parameter Value Unit
outer diameter 60 mm
inner diameter 26 mm
angle 90 °
end fillets no