Tube adapter ⌀ 200–100 mm (Length: 80 mm) 📦#1536
Generation date: 2025-09-03
3D model download
Free- inline-tube-adapter-lenA30mm-d_model1536-nb0_dd{id}.stl : 10.9 Mo
STL
Mesh quality :
0.05
0.05
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Template parameter | Value | Unit | Label | |
|---|---|---|---|---|
| #1 | side A length | 30 | mm | lenA |
| #2 | side A outer diameter | 200 | mm | diA |
| #3 | side A thickness | 3 | mm | thA |
| #4 | side B length | 30 | mm | lenB |
| #5 | side B outer diameter | 100 | mm | diB |
| #6 | side B thickness | 3 | mm | thB |
| #7 | transition length | 20 | mm | tra |
| #8 | axis offset | 0 | mm | ofs |
| #9 | ends fillet | 0 | fil | |
Representation of the parameters
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 250–100 mm (Length: 80 mm) (📦 #1537)
1 object(s) - format STL
Inline tube coupler ⌀250 mm to ⌀100 mm in STL format. Length of this reducer is 80 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 250 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 200–50 mm (Length: 80 mm) (📦 #1483)
1 object(s) - format STL
Tube connector ⌀200 mm to ⌀50 mm in STL format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)
1 object(s) - format STL
Straight tube adapter ⌀150 mm to ⌀96 mm in STL format. Length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 96 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 140–120 mm (Length: 60 mm) (📦 #1207)
1 object(s) - format STL
Tube reducer ⌀140 mm to ⌀120 mm in STL format. Final length of this coupler is 60 mm. The thickness of the tubes is identical: 4 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 4 | mm |
| side B length | 20 | mm |
| side B outer diameter | 120 | mm |
| side B thickness | 4 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 155–90 mm (Length: 90 mm) (📦 #1387)
1 object(s) - format STL
Inline sleeve ⌀155 mm to ⌀90 mm in STL format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 153–90 mm (Length: 90 mm) (📦 #1380)
1 object(s) - format STL
Straight tube coupler ⌀153 mm to ⌀90 mm in STL format. Total length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 153 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 155–90 mm (Length: 80 mm) (📦 #1384)
1 object(s) - format STL
Inline tube adapter ⌀155 mm to ⌀90 mm in STL format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 150–90 mm (Length: 90 mm) (📦 #1378)
1 object(s) - format STL
Tube reducer ⌀150 mm to ⌀90 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 110–106 mm (Length: 35 mm) (📦 #1239)
1 object(s) - format STL
Straight tube reducer ⌀110 mm to ⌀106 mm in STL format. Total length of this sleeve is 35 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 110 | mm |
| side A thickness | 3 | mm |
| side B length | 10 | mm |
| side B outer diameter | 106 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 120–90 mm (Length: 75 mm) (📦 #1164)
1 object(s) - format STL
Inline tube coupler ⌀120 mm to ⌀90 mm in STL format. Final length of this connector is 75 mm. The thickness of the larger diameter tube is 4 mm, and the smaller one is 3 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 25 | mm |
| side A outer diameter | 120 | mm |
| side A thickness | 4 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)
1 object(s) - format STL
Inline tube junction ⌀180 mm to ⌀60 mm in STL format. Total length of this adapter is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 200–180 mm (Length: 80 mm) (📦 #1161)
1 object(s) - format STL
Straight sleeve ⌀200 mm to ⌀180 mm in STL format. Total length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 180 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 140–100 mm (Length: 80 mm) (📦 #1217)
1 object(s) - format STL
Straight tube fitting ⌀140 mm to ⌀100 mm in STL format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The two axes of the tubes are offset. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 19.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1383)
1 object(s) - format STL
Straight tube reducer ⌀102 mm to ⌀90 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 85–70 mm (Length: 80 mm) (📦 #1321)
1 object(s) - format STL
Diameter adapter ⌀85 mm to ⌀70 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are off-center. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 7.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 94–90 mm (Length: 80 mm) (📦 #1391)
1 object(s) - format STL
Straight tube adapter ⌀94 mm to ⌀90 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 94 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 95–90 mm (Length: 70 mm) (📦 #1397)
1 object(s) - format STL
Straight tube coupler ⌀95 mm to ⌀90 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 95 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)
1 object(s) - format STL (4.5/5) 2 vote(s)
Diameter adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 4.9 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)
1 object(s) - format STL
Inline tube reducer ⌀102 mm to ⌀90 mm in STL format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 5.9 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 140–93 mm (Length: 110 mm) (📦 #1432)
1 object(s) - format STL
Tube adapter ⌀140 mm to ⌀93 mm in STL format. Final length of this coupler is 110 mm. The thickness of the tubes is identical: 5 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 140 | mm |
| side A thickness | 5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 93 | mm |
| side B thickness | 5 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube junction ⌀86 mm to ⌀81 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 81 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 85–60 mm (Length: 45 mm) (📦 #1165)
1 object(s) - format STL
Tube coupler ⌀85 mm to ⌀60 mm in STL format. Total length of this adapter is 45 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 20 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)
1 object(s) - format STL
Tube connector ⌀100 mm to ⌀40 mm in STL format. Final length of this junction is 80 mm. The thickness of the tubes is identical: 2.5 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2.5 | mm |
| side B length | 30 | mm |
| side B outer diameter | 40 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 92–71 mm (Length: 90 mm) (📦 #1371)
1 object(s) - format STL
Straight tube coupler ⌀92 mm to ⌀71 mm in STL format. Total length of this connector is 90 mm. The thickness of the larger diameter tube is 3 mm, and the smaller one is 2 mm. The two axes of the tubes are offset. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 10 | mm |
| side A outer diameter | 92 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 71 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 9.1 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–70 mm (Length: 65 mm) (📦 #1263)
1 object(s) - format STL
Inline tube adapter ⌀80 mm to ⌀70 mm in STL format. Final length of this reducer is 65 mm. The thickness of the tubes is identical: 4 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 4 | mm |
| side B length | 25 | mm |
| side B outer diameter | 70 | mm |
| side B thickness | 4 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)
1 object(s) - format STL
Tube reducer ⌀80 mm to ⌀50 mm in STL format. Length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 149–100 mm (Length: 200 mm) (📦 #1288)
1 object(s) - format STL (5.0/5) 2 vote(s)
Straight tube adapter ⌀149 mm to ⌀100 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 149 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 150–90 mm (Length: 200 mm) (📦 #1372)
1 object(s) - format STL
Inline tube junction ⌀150 mm to ⌀90 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀75 mm in STL format. Total length of this sleeve is 111 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |