?>

Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm) 📦#1440

STL Download STL
Create a new model:
from scratch search for a model
Inline sleeve ⌀81 mm to ⌀55 mm in STL 3D format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.
Generation date: 2025-08-27
3D Model Tube adapter STL 3D file ⌀ 81–55 mm (Length: 80 mm)

3D model download

Free
  • inline-tube-adapter-lenA25mm-d_model1440-nb0_dd{id}.stl : 6.7 Mo
STL Mesh quality : Linear deflection 0.05 Angular deflection 0.05
No compliance warranty No compliance warranty
(attribution - commercial use allowed)
Safe download

Values for this model

This model was generated by the Inline tube adapter template, with the following values:
Parameter Value
#1 side A length 25 mm
#2 side A outer diameter 81 mm
#3 side A thickness 2.5 mm
#4 side B length 25 mm
#5 side B outer diameter 55 mm
#6 side B thickness 2.5 mm
#7 transition length 30 mm
#8 axis offset 0 mm
#9 ends fillet fillet on the outside
illustration of the parameters
Representation of the parameters

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 side A length lenA
#2 side A outer diameter diA
#3 side A thickness thA
#4 side B length lenB
#5 side B outer diameter diB
#6 side B thickness thB
#7 transition length tra
#8 axis offset ofs
#9 ends fillet fil

Related 3D models

To search for a model based on your own parameters, go to the template page Inline tube adapter 

Tube adapter STL 3D file ⌀ 70–69 mm (Length: 50 mm) (📦 #1394)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 70–69 mm (Length: 50 mm)
Diameter adapter ⌀70 mm to ⌀69 mm in STL 3D format. Length of this sleeve is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 20 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 69 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm) (📦 #1575)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–50 mm (Length: 80 mm)
Tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)

1 object(s) - format STL
Tube adapter STL file ⌀ 77–50 mm (Length: 125 mm)
Tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this fitting is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are rounded on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 77–50 mm (Length: 125 mm)
Inline tube adapter ⌀77 mm to ⌀50 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 1 mm. The ends have a fillet on the outside.
Parameter Value Unit
side A length 45 mm
side A outer diameter 77 mm
side A thickness 2.5 mm
side B length 40 mm
side B outer diameter 50 mm
side B thickness 2.5 mm
transition length 40 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 82–63 mm (Length: 75 mm) (📦 #2117)

1 object(s) - format STL
Tube adapter STL file ⌀ 82–63 mm (Length: 75 mm)
Straight sleeve ⌀82 mm to ⌀63 mm in STL format. Length of this junction is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet on the inside.
Parameter Value Unit
side A length 25 mm
side A outer diameter 82 mm
side A thickness 3 mm
side B length 25 mm
side B outer diameter 63 mm
side B thickness 3 mm
transition length 25 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm) (📦 #1990)

1 object(s) - format STL
Tube adapter STL file ⌀ 86–66 mm (Length: 70 mm)
Tube fitting ⌀86 mm to ⌀66 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 86 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 66 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 100–50 mm (Length: 90 mm) (📦 #1454)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–50 mm (Length: 90 mm)
Tube connector ⌀100 mm to ⌀50 mm in STL format. Total length of this fitting is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet on the inside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 30 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm) (📦 #1882)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–60 mm (Length: 60 mm)
Tube connector ⌀80 mm to ⌀60 mm in STL 3D format. Final length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm) (📦 #1163)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 80 mm)
Tube coupler ⌀80 mm to ⌀50 mm in STL format. Final length of this adapter is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 76–50 mm (Length: 60 mm) (📦 #1358)

1 object(s) - format STL (5.0/5) 1 vote(s)
Tube adapter STL file ⌀ 76–50 mm (Length: 60 mm)
Straight tube fitting ⌀76 mm to ⌀50 mm in STL 3D format. Length of this fitting is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature an internal fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 76 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm) (📦 #1439)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 76–50 mm (Length: 80 mm)
Straight sleeve ⌀76 mm to ⌀50 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 76 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm) (📦 #1578)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–40 mm (Length: 80 mm)
Inline tube junction ⌀100 mm to ⌀40 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2.5 mm
side B length 30 mm
side B outer diameter 40 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–50 mm (Length: 60 mm) (📦 #1359)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–50 mm (Length: 60 mm)
Inline tube reducer ⌀80 mm to ⌀50 mm in STL 3D format. Total length of this connector is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to make tube connection easier.
Parameter Value Unit
side A length 20 mm
side A outer diameter 80 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 78–50 mm (Length: 60 mm) (📦 #1360)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 78–50 mm (Length: 60 mm)
Inline sleeve ⌀78 mm to ⌀50 mm in STL format. Length of this sleeve is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The two axes of the tubes are offset by 1 mm. The ends feature an internal fillet to ease the connection.
Parameter Value Unit
side A length 20 mm
side A outer diameter 78 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 100–53 mm (Length: 100 mm) (📦 #1600)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 100–53 mm (Length: 100 mm)
Inline fitting ⌀100 mm to ⌀53 mm in STL 3D format. Final length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 53 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 100–50 mm (Length: 100 mm) (📦 #1451)

1 object(s) - format STL
Tube adapter STL file ⌀ 100–50 mm (Length: 100 mm)
Inline fitting ⌀100 mm to ⌀50 mm in STL 3D format. Total length of this reducer is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 30 mm
side A outer diameter 100 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 94–90 mm (Length: 80 mm) (📦 #1391)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 94–90 mm (Length: 80 mm)
Straight tube fitting ⌀94 mm to ⌀90 mm in STL 3D format. Length of this adapter is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 30 mm
side A outer diameter 94 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 111 mm)
Diameter adapter ⌀80 mm to ⌀75 mm in STL 3D format. Final length of this connector is 111 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The two axes of the tubes are off-center by 2.4 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 20 mm
axis offset 2.4 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 78–50 mm (Length: 80 mm) (📦 #1361)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 78–50 mm (Length: 80 mm)
Tube connector ⌀78 mm to ⌀50 mm in STL 3D format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The axes of the tubes are off-center by 1 mm. The ends have a fillet on the inside to facilitate the connection of the two tubes.
Parameter Value Unit
side A length 40 mm
side A outer diameter 78 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 50 mm
side B thickness 2 mm
transition length 20 mm
axis offset 1 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 60–45 mm (Length: 75 mm) (📦 #1234)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 60–45 mm (Length: 75 mm)
Diameter adapter ⌀60 mm to ⌀45 mm in STL format. Final length of this sleeve is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 60 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 45 mm
side B thickness 3 mm
transition length 15 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm) (📦 #1920)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 46–41 mm (Length: 90 mm)
Tube junction ⌀46 mm to ⌀41 mm in STL 3D format. Length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 46 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 41 mm
side B thickness 3 mm
transition length 30 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm) (📦 #1587)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–30 mm (Length: 80 mm)
Diameter adapter ⌀80 mm to ⌀30 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 30 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm) (📦 #1166)

1 object(s) - format STL (4.5/5) 2 vote(s)
Tube adapter STL 3D file ⌀ 80–70 mm (Length: 80 mm)
Straight tube adapter ⌀80 mm to ⌀70 mm in STL format. Total length of this fitting is 80 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends are not rounded.
Parameter Value Unit
side A length 30 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 30 mm
side B outer diameter 70 mm
side B thickness 3 mm
transition length 20 mm
axis offset 4.9 mm
ends fillet no fillet

Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm) (📦 #1842)

1 object(s) - format STL
Tube adapter STL file ⌀ 120–60 mm (Length: 80 mm)
Tube fitting ⌀120 mm to ⌀60 mm in STL format. Total length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.
Parameter Value Unit
side A length 20 mm
side A outer diameter 120 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 60 mm
side B thickness 2 mm
transition length 40 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL 3D file ⌀ 94–80 mm (Length: 50 mm) (📦 #1929)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 94–80 mm (Length: 50 mm)
Tube reducer ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 5.9 mm. The ends feature an external fillet.
Parameter Value Unit
side A length 20 mm
side A outer diameter 94 mm
side A thickness 2 mm
side B length 20 mm
side B outer diameter 80 mm
side B thickness 2 mm
transition length 10 mm
axis offset 5.9 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 80–75 mm (Length: 111 mm)
Tube adapter ⌀80 mm to ⌀75 mm in STL format. Length of this coupler is 111 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 46 mm, the smaller one of 45 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 46 mm
side A outer diameter 80 mm
side A thickness 3 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 3 mm
transition length 20 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 95–90 mm (Length: 70 mm) (📦 #1397)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 95–90 mm (Length: 70 mm)
Straight sleeve ⌀95 mm to ⌀90 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.
Parameter Value Unit
side A length 30 mm
side A outer diameter 95 mm
side A thickness 2 mm
side B length 30 mm
side B outer diameter 90 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm) (📦 #1393)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 69–65 mm (Length: 100 mm)
Inline tube coupler ⌀69 mm to ⌀65 mm in STL format. Final length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The ends feature an external fillet to make tube connection easier.
Parameter Value Unit
side A length 40 mm
side A outer diameter 69 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 65 mm
side B thickness 2 mm
transition length 10 mm
axis offset 0 mm
ends fillet fillet on th...

Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm) (📦 #2254)

1 object(s) - format STL
Tube adapter STL 3D file ⌀ 70–62 mm (Length: 100 mm)
Straight tube adapter ⌀70 mm to ⌀62 mm in STL format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.
Parameter Value Unit
side A length 30 mm
side A outer diameter 70 mm
side A thickness 2 mm
side B length 50 mm
side B outer diameter 62 mm
side B thickness 2 mm
transition length 20 mm
axis offset 0 mm
ends fillet no fillet

Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)

1 object(s) - format STL
Tube adapter STL file ⌀ 80–75 mm (Length: 100 mm)
Inline tube coupler ⌀80 mm to ⌀75 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 45 mm as well. The axes of the tubes are offset by 2.4 mm. The ends have a fillet on the outside to make tube connection easier.
Parameter Value Unit
side A length 45 mm
side A outer diameter 80 mm
side A thickness 2.5 mm
side B length 45 mm
side B outer diameter 75 mm
side B thickness 2.5 mm
transition length 10 mm
axis offset 2.4 mm
ends fillet fillet on th...