Tube adapter ⌀ 149–100 mm (Length: 200 mm) 📦#1288
Generation date: 2025-07-28
3D model download
Free- inline-tube-adapter-lenA50mm-d_model1288-nb0_dd{id}.stl : 8.5 Mo
STL
Mesh quality :
not defined
License: CC BY - Creative commons
(attribution - commercial use allowed)
Values for this model
This model was generated by the Inline tube adapter template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | side A length | 50 mm |
| #2 | side A outer diameter | 149 mm |
| #3 | side A thickness | 2 mm |
| #4 | side B length | 100 mm |
| #5 | side B outer diameter | 100 mm |
| #6 | side B thickness | 2 mm |
| #7 | transition length | 50 mm |
| #8 | axis offset | 0 mm |
| #9 | ends fillet | fillet on the outside |
Representation of the parameters
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 side A length | lenA |
| #2 side A outer diameter | diA |
| #3 side A thickness | thA |
| #4 side B length | lenB |
| #5 side B outer diameter | diB |
| #6 side B thickness | thB |
| #7 transition length | tra |
| #8 axis offset | ofs |
| #9 ends fillet | fil |
Related 3D models
To search for a model based on your own parameters, go to the template page Inline tube adapter
Tube adapter ⌀ 150–90 mm (Length: 200 mm) (📦 #1372)
1 object(s) - format STL
Inline tube junction ⌀150 mm to ⌀90 mm in STL format. Final length of this junction is 200 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 100 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 100–60 mm (Length: 180 mm) (📦 #1414)
1 object(s) - format STL
Straight tube coupler ⌀100 mm to ⌀60 mm in STL format. Length of this connector is 180 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 60 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 60 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 2 | mm |
| transition length | 60 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 150–96 mm (Length: 150 mm) (📦 #1468)
1 object(s) - format STL
Straight tube adapter ⌀150 mm to ⌀96 mm in STL format. Length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 96 | mm |
| side B thickness | 3 | mm |
| transition length | 50 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–90 mm (Length: 90 mm) (📦 #1378)
1 object(s) - format STL
Tube reducer ⌀150 mm to ⌀90 mm in STL format. Total length of this connector is 90 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 153–90 mm (Length: 90 mm) (📦 #1380)
1 object(s) - format STL
Straight tube coupler ⌀153 mm to ⌀90 mm in STL format. Total length of this coupler is 90 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 153 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 155–90 mm (Length: 90 mm) (📦 #1387)
1 object(s) - format STL
Inline sleeve ⌀155 mm to ⌀90 mm in STL format. Total length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 102–90 mm (Length: 150 mm) (📦 #1768)
1 object(s) - format STL
Tube adapter ⌀102 mm to ⌀90 mm in STL format. Total length of this connector is 150 mm. The thickness of the tubes is identical: 2 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 155–90 mm (Length: 80 mm) (📦 #1384)
1 object(s) - format STL
Inline tube adapter ⌀155 mm to ⌀90 mm in STL format. Final length of this connector is 80 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 155 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 110–100 mm (Length: 125 mm) (📦 #1803)
1 object(s) - format STL
Tube adapter ⌀110 mm to ⌀100 mm in STL format. Final length of this fitting is 125 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 110 | mm |
| side A thickness | 3 | mm |
| side B length | 70 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 5 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 150–75 mm (Length: 150 mm) (📦 #1797)
1 object(s) - format STL
Inline tube reducer ⌀150 mm to ⌀75 mm in STL format. Final length of this connector is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 3 | mm |
| side B length | 40 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1383)
1 object(s) - format STL
Straight tube reducer ⌀102 mm to ⌀90 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 103–90 mm (Length: 150 mm) (📦 #1767)
1 object(s) - format STL
Straight sleeve ⌀103 mm to ⌀90 mm in STL format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 70 | mm |
| side A outer diameter | 103 | mm |
| side A thickness | 3 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 3 | mm |
| transition length | 30 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1218)
1 object(s) - format STL
Inline fitting ⌀80 mm to ⌀75 mm in STL format. Total length of this sleeve is 111 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends have a fillet on the outside.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 20 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 102–90 mm (Length: 80 mm) (📦 #1382)
1 object(s) - format STL
Inline tube reducer ⌀102 mm to ⌀90 mm in STL format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are offset. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 102 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 5.9 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 86–81 mm (Length: 111 mm) (📦 #1215)
1 object(s) - format STL (5.0/5) 1 vote(s)
Inline tube junction ⌀86 mm to ⌀81 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 86 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 81 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 94–90 mm (Length: 80 mm) (📦 #1391)
1 object(s) - format STL
Straight tube adapter ⌀94 mm to ⌀90 mm in STL format. Final length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 94 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 115 mm) (📦 #1213)
1 object(s) - format STL
Inline tube reducer ⌀80 mm to ⌀75 mm in STL format. Final length of this reducer is 115 mm. The thickness of the tubes is identical: 2 mm. The axes of the tubes are off-center. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 15 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 80–75 mm (Length: 101 mm) (📦 #1219)
1 object(s) - format STL
Diameter adapter ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 101 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 100 mm) (📦 #1220)
1 object(s) - format STL
Tube junction ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 2.5 mm. The axes of the tubes are offset. The ends are rounded on the outside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 2.5 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2.5 | mm |
| transition length | 10 | mm |
| axis offset | 2.4 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 80–75 mm (Length: 111 mm) (📦 #1214)
1 object(s) - format STL
Tube connector ⌀80 mm to ⌀75 mm in STL format. Final length of this adapter is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are rounded on the outside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 46 | mm |
| side A outer diameter | 80 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 95–90 mm (Length: 70 mm) (📦 #1397)
1 object(s) - format STL
Straight tube coupler ⌀95 mm to ⌀90 mm in STL format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 95 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 90 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 150–75 mm (Length: 80 mm) (📦 #1758)
1 object(s) - format STL
Straight sleeve ⌀150 mm to ⌀75 mm in STL format. Length of this junction is 80 mm. The thickness of the tubes is identical: 2 mm. The ends have a fillet on the inside to ease the connection.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 20 | mm |
| side A outer diameter | 150 | mm |
| side A thickness | 2 | mm |
| side B length | 20 | mm |
| side B outer diameter | 75 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 77–50 mm (Length: 125 mm) (📦 #1555)
1 object(s) - format STL
Straight tube connector ⌀77 mm to ⌀50 mm in STL format. Total length of this reducer is 125 mm. The thickness of the tubes is identical: 2.5 mm. The ends have a fillet on the outside to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 77–50 mm (Length: 125 mm) (📦 #1556)
1 object(s) - format STL
Inline tube adapter ⌀77 mm to ⌀50 mm in STL format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.5 mm. The two axes of the tubes are off-center. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 77 | mm |
| side A thickness | 2.5 | mm |
| side B length | 40 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2.5 | mm |
| transition length | 40 | mm |
| axis offset | 1 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 69–65 mm (Length: 100 mm) (📦 #1393)
1 object(s) - format STL
Inline sleeve ⌀69 mm to ⌀65 mm in STL format. Total length of this fitting is 100 mm. The thickness of the tubes is identical: 2 mm. The ends feature an external fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 40 | mm |
| side A outer diameter | 69 | mm |
| side A thickness | 2 | mm |
| side B length | 50 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 2 | mm |
| transition length | 10 | mm |
| axis offset | 0 | mm |
| ends fillet | 1 |
Tube adapter ⌀ 180–60 mm (Length: 150 mm) (📦 #1424)
1 object(s) - format STL
Inline tube junction ⌀180 mm to ⌀60 mm in STL format. Total length of this adapter is 150 mm. The thickness of the tubes is identical: 3 mm. The ends are not rounded.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 50 | mm |
| side A outer diameter | 180 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 60 | mm |
| side B thickness | 3 | mm |
| transition length | 70 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 85–65 mm (Length: 111 mm) (📦 #1690)
1 object(s) - format STL
Inline tube junction ⌀85 mm to ⌀65 mm in STL format. Total length of this reducer is 111 mm. The thickness of the tubes is identical: 3 mm. The ends are raw.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 45 | mm |
| side A outer diameter | 85 | mm |
| side A thickness | 3 | mm |
| side B length | 45 | mm |
| side B outer diameter | 65 | mm |
| side B thickness | 3 | mm |
| transition length | 21 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–53 mm (Length: 100 mm) (📦 #1600)
1 object(s) - format STL
Inline tube junction ⌀100 mm to ⌀53 mm in STL format. Length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The ends are rounded on the inside to make tube connection easier.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 53 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |
Tube adapter ⌀ 200–100 mm (Length: 80 mm) (📦 #1536)
1 object(s) - format STL
Tube fitting ⌀200 mm to ⌀100 mm in STL format. Total length of this connector is 80 mm. The thickness of the tubes is identical: 3 mm. The ends have no fillet.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 200 | mm |
| side A thickness | 3 | mm |
| side B length | 30 | mm |
| side B outer diameter | 100 | mm |
| side B thickness | 3 | mm |
| transition length | 20 | mm |
| axis offset | 0 | mm |
| ends fillet | 0 |
Tube adapter ⌀ 100–50 mm (Length: 100 mm) (📦 #1451)
1 object(s) - format STL
Tube connector ⌀100 mm to ⌀50 mm in STL format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The ends feature an internal fillet to facilitate the connection of the two tubes.
| Parameter | Value | Unit |
|---|---|---|
| side A length | 30 | mm |
| side A outer diameter | 100 | mm |
| side A thickness | 2 | mm |
| side B length | 30 | mm |
| side B outer diameter | 50 | mm |
| side B thickness | 2 | mm |
| transition length | 40 | mm |
| axis offset | 0 | mm |
| ends fillet | 2 |