Custom Oval duct transition adapter STL 3D file 25.6x15.7 mm to 11x10 mm – transition: 160 mm 📦#10315

Oval duct transition adapter in STL 3D file format. The internal cross-section on side A is 73x30 mm, while on side B it is 65x35 mm. The useful lengths are 30 mm (A) and 50 mm (B), respectively. The transition section between the two ends is 150 mm long, for an overall length of 230 mm (sleeve A, transition and sleeve B). The external edges at the ends are chamfered, which simplifies inserting the adapter into the duct.

STL 3D file for an oval adapter. On side A, the internal cross-section is 20.1x10 mm (oval), whereas on side B it is 19.1x19 mm (nearly circular). Each sleeve provides a useful length of 10 mm. The transition links the two ends over 100 mm, with a total overall length of 120 mm. The shell stays very lightweight, with only 1 mm of wall thickness. The internal edges at the ends are chamfered to help guide the duct during insertion. An offset of 10 mm along the Z axis is applied to side B relative to side A.

Oval adapter available as a STL 3D file. Side A offers an internal cross-section of 63x47 mm and side B 53x37 mm. Both sleeves share an identical useful length of 5 mm. Between the two sleeves, the transition runs over 110 mm, resulting in an overall length of 120 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

STL 3D file for an oval connector. Side A offers an internal cross-section of 23.1x11.7 mm (oval) and side B 19x18.9 mm (nearly circular). The sleeve on side A provides a useful length of 20 mm, and on side B 15 mm. The transition links the two ends over 40 mm, with a total overall length of 75 mm. Wall thickness is minimal at 1 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier. An offset of 8.8 mm along the Z axis is applied to side B relative to side A.

STL 3D file for an oval hose fitting. The internal cross-section on side A is 22.9x11.6 mm (oval), while on side B it is 18x17.9 mm (nearly circular). The useful sleeve length on side A is 20 mm, while on side B it reaches 10 mm. The central transition occupies 40 mm, bringing the overall length to 70 mm. With 1 mm of thickness, the wall remains flexible and material-efficient. Internal chamfers are added at the ends to make assembly and duct insertion easier. An offset of 8.7 mm along the Z axis is applied to side B relative to side A.

STL 3D file for an oval adapter. Side A offers an internal cross-section of 90.1x90 mm (nearly circular) and side B 100x40 mm (oval). The useful sleeve length on side A is 50 mm, while on side B it reaches 20 mm. The transition section is 100 mm long, for a final overall length of 170 mm. The external chamfers improve fit when inserting the adapter into ducts or hoses.

Oval duct adapter available as a STL 3D file. On side A, the internal cross-section is 35x17.2 mm (oval), whereas on side B it is 30x29.9 mm (nearly circular). The useful length is consistent on both ends: 8 mm. The central transition occupies 20 mm, bringing the overall length to 36 mm. External chamfers are added at the ends to make it easier to insert the adapter into ducts or hoses.

Oval adapter available as a STL 3D file. The internal cross-section on side A is 35x17.2 mm (oval), while on side B it is 30.6x30.5 mm (nearly circular). Both sleeves share an identical useful length of 8 mm. The transition section is 20 mm long, for a final overall length of 36 mm. The external edges at the ends are chamfered, which simplifies inserting the adapter into the duct.

STL 3D file for an oval pipe adapter. Side A offers an internal cross-section of 67x47 mm and side B 55x35 mm. A uniform useful length of 10 mm is available on both sleeves. The central transition occupies 90 mm, bringing the overall length to 110 mm. The ends are left without chamfers, with raw inner and outer edges.

Oval pipe adapter available as a STL 3D file. On side A, the internal cross-section is 100x15 mm, whereas on side B it is 50x28 mm. The useful sleeve length is the same on both sides, 10 mm. The transition portion extends over 40 mm and the overall length, sleeves included, is 60 mm. The internal chamfers help start the duct insertion more easily.

Oval duct transition adapter available as a STL 3D file. Both ends share the same internal cross-section, 52.5x22.7 mm. A uniform useful length of 30 mm is available on both sleeves. The transition section is 35.5 mm long, for a final overall length of 95.5 mm. Wall thickness is minimal at 1 mm. The internal chamfers help start the duct insertion more easily.

Oval duct coupling available as a STL 3D file. Both ends share the same internal cross-section, 52.5x22.7 mm. Each sleeve provides a useful length of 30 mm. The central transition occupies 35 mm, bringing the overall length to 95 mm. With 1 mm of thickness, the wall remains flexible and material-efficient. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval duct adapter provided as a STL 3D file. Side A offers an internal cross-section of 50x20 mm (oval) and side B 35.6x35.5 mm (nearly circular). On side A, the sleeve is 20 mm long, and on side B 35 mm. The transition section between the two ends is 20 mm long, for an overall length of 75 mm (sleeve A, transition and sleeve B). The external chamfers improve fit when inserting the adapter into ducts or hoses.

Oval duct coupling available as a STL 3D file. On side A, the internal cross-section is 20.1x20 mm (nearly circular), whereas on side B it is 35x15 mm (oval). A uniform useful length of 25 mm is available on both sleeves. The transition section between the two ends is 20 mm long, for an overall length of 70 mm (sleeve A, transition and sleeve B). The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval hose adapter provided as a STL 3D file. The internal cross-sections on sides A and B are identical, 26x17 mm. The useful sleeve length is the same on both sides, 20 mm. The transition section is 20 mm long, for a final overall length of 60 mm. The internal edges at the ends are chamfered to help guide the duct during insertion. Compared to side A, side B is shifted by 1.3 mm along the Y axis and 8.5 mm along the Z axis.

Oval connector available as a STL 3D file. The internal cross-section on side A is 53x52 mm (nearly circular), while on side B it is 50x28 mm (oval). On side A, the sleeve is 20 mm long, and on side B 30 mm. The transition section is 20 mm long, for a final overall length of 70 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval connector provided as a STL 3D file. On both sides A and B, the internal cross-section is the same: 22.9x11.5 mm. Both sleeves share an identical useful length of 5 mm. The transition portion extends over 20 mm and the overall length, sleeves included, is 30 mm. The shell stays very lightweight, with only 1 mm of wall thickness. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval duct transition adapter available as a STL 3D file. The internal cross-section on side A is 36.1x32.9 mm (oval), while on side B it is 28.5x28.4 mm (nearly circular). The useful lengths are 22 mm (A) and 42 mm (B), respectively. The central transition occupies 20 mm, bringing the overall length to 84 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval hose adapter in STL 3D file format. On side A, the internal cross-section is 52x40 mm (oval), whereas on side B it is 44x43 mm (nearly circular). Each sleeve provides a useful length of 30 mm. Between the two sleeves, the transition runs over 20 mm, resulting in an overall length of 80 mm. Internal chamfers are added at the ends to make assembly and duct insertion easier.

STL 3D file for an oval connector. On side A, the internal cross-section is 88.9x34.9 mm (oval), whereas on side B it is 46x45 mm (nearly circular). The useful length is consistent on both ends: 10 mm. The transition links the two ends over 20 mm, with a total overall length of 40 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval pipe adapter in STL 3D file format. The internal cross-section on side A is 52x39 mm (oval), while on side B it is 47x46 mm (nearly circular). The useful sleeve length is the same on both sides, 30 mm. The transition section is 20 mm long, for a final overall length of 80 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval hose adapter available as a STL 3D file. The internal cross-section on side A is 36.1x32.9 mm (oval), while on side B it is 31.6x31.5 mm (nearly circular). Both sleeves share an identical useful length of 42 mm. The transition section is 20 mm long, for a final overall length of 104 mm. The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval adapter in STL 3D file format. Side A offers an internal cross-section of 20x19.9 mm and side B 12x11.9 mm, both close to circular. On side A, the sleeve is 35 mm long, and on side B 14 mm. The transition section between the two ends is 30 mm long, for an overall length of 79 mm (sleeve A, transition and sleeve B). The ends are left without chamfers, with raw inner and outer edges.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x40 mm, whereas on side B it is 130x35 mm. The useful sleeve length on side A is 8 mm, while on side B it reaches 6 mm. The transition section between the two ends is 40 mm long, for an overall length of 54 mm (sleeve A, transition and sleeve B). The internal edges at the ends are chamfered to help guide the duct during insertion.

Oval connector available as a STL 3D file. On side A, the internal cross-section is 140x50 mm, whereas on side B it is 130x35 mm. You get a sleeve of 8 mm on side A and 6 mm on side B. The central transition occupies 40 mm, bringing the overall length to 54 mm. The internal chamfers help start the duct insertion more easily.

Oval duct transition adapter in STL 3D file format. Side A offers an internal cross-section of 150x40 mm and side B 130x35 mm. The sleeve on side A provides a useful length of 8 mm, and on side B 6 mm. Between the two sleeves, the transition runs over 40 mm, resulting in an overall length of 54 mm. Internal chamfers at the ends improve assembly and make insertion smoother.

Oval coupling in STL 3D file format. Side A offers an internal cross-section of 43x35 mm (oval) and side B 58.1x58 mm (nearly circular). The useful lengths are 18 mm (A) and 25 mm (B), respectively. The transition section is 20 mm long, for a final overall length of 63 mm. The wall is on the thicker side at 4 mm. The internal chamfers help start the duct insertion more easily.

Oval coupling in STL 3D file format. The internal cross-section on side A is 30.7x30.6 mm (nearly circular), while on side B it is 30.7x12 mm (oval). The useful length is consistent on both ends: 20 mm. The central transition occupies 20 mm, bringing the overall length to 60 mm. The ends are straight, with no chamfer at all. Compared to side A, side B is shifted by 10 mm along the Z axis.

STL 3D file for an oval duct adapter. The internal cross-section on side A is 160x37 mm (oval), while on side B it is 45.1x45 mm (nearly circular). The useful length is consistent on both ends: 20 mm. The transition links the two ends over 20 mm, with a total overall length of 60 mm. External chamfers at the ends help with engagement and assembly within the duct system. Side B is offset by 10 mm along the Y axis relative to side A.