Custom O'ring STL 3D file ID 70 × CS 3.2 mm 📦#10164
Generation date: 2026-07-16
3D model download
Free- o-ring-ID70mm-CS3.2mm_model101_model10164-nb0_dd{id}.stl : 1.5 Mo
STL
Mesh quality :
not defined
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the O-ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter (ID) | 70 mm (≃2 3/4 in) |
| #2 | cross section (CS) | 3.2 mm (≃1/8 in) |
| Metadata | Value |
|---|---|
| outer diameter (OD) | 76.4 mm (≃3 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter (ID) | ID |
| #2 cross section (CS) | CS |
Related 3D models
To search for a model based on your own parameters, go to the template page O-ring
O-ring STL file ID 70 × CS 3.1 mm (📦 #10177)
1 object(s) - format STL
STL model of circular seal with Internal diameter 70 mm by CS 3.1 mm. Outer diameter (OD, for outer diameter) resulting is therefore 76.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 3.1 | mm |
O'ring STL file ID 69.8 × CS 3.1 mm (📦 #4770)
1 object(s) - format STL
STL model of O-ring with dimensions ID 69.8 mm by CS (cross section) 3.1 mm. Outer diameter (OD, for outer diameter) resulting is 76 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 69.8 | mm |
| cross section (CS) | 3.1 | mm |
O-ring STL file ID 70 × CS 3 mm (📦 #10155)
1 object(s) - format STL
File of sealing ring with Inner diameter (ID) 70 mm / CS 3 mm. External diameter (OD) resulting corresponds to 76 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)
1 object(s) - format STL
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5 mm. The outer diameter resulting is 77 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 3.5 | mm |
O'ring STL file ID 72 × CS 3.5 mm (📦 #4922)
1 object(s) - format STL
File of circular seal with dimensions ID (inner diameter) 72 mm × CS 3.5 mm. The outer diameter is 79 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 72 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 67 × CS 3.5 mm (📦 #5442)
1 object(s) - format STL
3D file of rubber ring with dimensions Internal diameter 67 mm / thickness 3.5 mm. The outer diameter resulting is 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 67 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 77 × CS 3 mm (📦 #8504)
1 object(s) - format STL
3D model of sealing ring with ID 77 mm by thickness 3 mm. Outer diameter (OD, for outer diameter) resulting is 83 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 77 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 72.4 × CS 2.6 mm (📦 #2004)
1 object(s) - format STL
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6 mm. External diameter (OD) corresponds to 77.6 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 72.4 | mm |
| cross section (CS) | 2.6 | mm |
O-ring STL 3D file ID 84 × CS 3 mm (📦 #1807)
1 object(s) - format STL
File of sealing ring with dimensions Inner diameter 84 mm / CS 3 mm. Final diameter corresponds to 90 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 84 | mm |
| cross section (CS) | 3 | mm |
O-ring STL 3D file ID 81.6 × CS 3.7 mm (📦 #5967)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with Inner diameter (ID) 81.6 mm × thickness 3.7 mm. External diameter (OD) corresponds to 89 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 81.6 | mm |
| cross section (CS) | 3.7 | mm |
O-ring STL file ID 85 × CS 3.5 mm (📦 #8708)
1 object(s) - format STL
STL file of circular seal with Internal diameter 85 mm × CS 3.5 mm. Outer diameter (OD, for outer diameter) resulting corresponds to 92 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 85 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL 3D file ID 70 × CS 4 mm (📦 #1681)
1 object(s) - format STL
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4 mm. External diameter (OD) is therefore 78 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 70 | mm |
| cross section (CS) | 4 | mm |
O'ring STL 3D file ID 57.1 × CS 3.7 mm (📦 #5974)
1 object(s) - format STL
Model of O-ring with ID 57.1 mm × CS 3.7 mm. Final diameter resulting is therefore 64.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 57.1 | mm |
| cross section (CS) | 3.7 | mm |
O'ring STL 3D file ID 72 × CS 4 mm (📦 #7865)
1 object(s) - format STL
3D model of circular seal with dimensions Internal diameter 72 mm by thickness 4 mm. Outer diameter (OD) is 80 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 72 | mm |
| cross section (CS) | 4 | mm |
O-ring STL file ID 54 × CS 3 mm (📦 #1806)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3 mm. The outer diameter resulting is 60 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 54 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 67 × CS 4 mm (📦 #6522)
1 object(s) - format STL
3D file of rubber ring with Inner diameter 67 mm / thickness 4 mm. Outer diameter (OD) is therefore 75 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 67 | mm |
| cross section (CS) | 4 | mm |
O'ring STL file ID 66 × CS 4 mm (📦 #3609)
1 object(s) - format STL
STL model of sealing ring with ID (inner diameter) 66 mm × CS (cross section) 4 mm. The outer diameter corresponds to 74 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 66 | mm |
| cross section (CS) | 4 | mm |
O'ring STL file ID 80 × CS 2.5 mm (📦 #1348)
1 object(s) - format STL
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5 mm. Outer diameter (OD) is therefore 85 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 80 | mm |
| cross section (CS) | 2.5 | mm |
O'ring STL file ID 53 × CS 3 mm (📦 #9707)
1 object(s) - format STL
Model of sealing ring with dimensions Internal diameter (ID) 53 mm × thickness 3 mm. Final diameter resulting is therefore 59 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 53 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 62 × CS 4 mm (📦 #3586)
1 object(s) - format STL
Model of O-ring (torus-shaped seal) with dimensions ID 62 mm by thickness 4 mm. External diameter (OD) resulting is 70 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 62 | mm |
| cross section (CS) | 4 | mm |
O-ring STL 3D file ID 52 × CS 3 mm (📦 #9705)
1 object(s) - format STL
STL model of circular seal with Inner diameter 52 mm × thickness 3 mm. External diameter (OD) resulting is 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 52 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 61 × CS 4 mm (📦 #7401)
1 object(s) - format STL
3D model of circular seal with dimensions Internal diameter (ID) 61 mm / section thickness 4 mm. Final diameter corresponds to 69 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 61 | mm |
| cross section (CS) | 4 | mm |
O'ring STL 3D file ID 51 × CS 3.5 mm (📦 #3350)
1 object(s) - format STL
STL model of sealing ring with Inner diameter 51 mm / thickness 3.5 mm. Outer diameter (OD, for outer diameter) corresponds to 58 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 51 | mm |
| cross section (CS) | 3.5 | mm |
O-ring STL file ID 50 × CS 3 mm (📦 #2430)
1 object(s) - format STL
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3 mm. Outer diameter (OD) is therefore 56 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 68 × CS 2.2 mm (📦 #8675)
1 object(s) - format STL
STL file of O-ring (torus-shaped seal) with ID 68 mm / thickness 2.2 mm. External diameter (OD) resulting is therefore 72.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 68 | mm |
| cross section (CS) | 2.2 | mm |
O-ring STL 3D file ID 90 × CS 3.5 mm (📦 #1328)
1 object(s) - format STL
STL model of O-ring (torus-shaped seal) with dimensions ID 90 mm × section thickness 3.5 mm. Outer diameter (OD) resulting corresponds to 97 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 90 | mm |
| cross section (CS) | 3.5 | mm |
O'ring STL file ID 91 × CS 3 mm (📦 #2986)
1 object(s) - format STL (5.0/5) 1 vote(s)
Model of O-ring (torus-shaped seal) with ID (inner diameter) 91 mm / thickness 3 mm. The outer diameter corresponds to 97 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 91 | mm |
| cross section (CS) | 3 | mm |
O-ring STL file ID 50 × CS 3.6 mm (📦 #3144)
1 object(s) - format STL
3D file in STL format of O-ring with ID (inner diameter) 50 mm by CS 3.6 mm. External diameter (OD) resulting is therefore 57.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 50 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL 3D file ID 49 × CS 3.6 mm (📦 #3253)
1 object(s) - format STL (5.0/5) 2 vote(s)
STL model of circular seal with Internal diameter 49 mm / section thickness 3.6 mm. Outer diameter (OD) is therefore 56.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 49 | mm |
| cross section (CS) | 3.6 | mm |
O-ring STL file ID 52 × CS 2.5 mm (📦 #8722)
1 object(s) - format STL
3D model in STL format of circular seal with dimensions Internal diameter 52 mm / CS 2.5 mm. Outer diameter (OD) corresponds to 57 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter (ID) | 52 | mm |
| cross section (CS) | 2.5 | mm |