Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 3

Straight tube connector ⌀153 mm to ⌀98 mm in STL format. Total length of this fitting is 130 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The two axes of the tubes are offset by 25 mm. The ends have no fillet.

Inline tubing adapter ⌀153 mm to ⌀152 mm in STL 3D format. Length of this sleeve is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 28 mm. The ends have a fillet to make tube connection easier.

Straight tube fitting ⌀153 mm to ⌀135 mm in STL 3D format. Total length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded.

Straight tube connector ⌀153 mm to ⌀122 mm in STL format. Total length of this fitting is 250 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 190 mm. The two axes of the tubes are off-center by 10 mm. The ends are raw.

Inline tube reducer ⌀153 mm to ⌀80 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are rounded on the outside.

Straight tube coupler ⌀153 mm to ⌀108 mm in STL format. Final length of this coupler is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are raw.

Tube reducer ⌀153 mm to ⌀83 mm in STL 3D format. Length of this connector is 250 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 110 mm, the smaller one of 60 mm. The ends have no fillet.

Tube coupler ⌀153 mm to ⌀83 mm in STL format. Final length of this connector is 170 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 50 mm. The axes of the tubes are off-center by 29 mm. The ends are not rounded.

Straight sleeve ⌀154 mm to ⌀133 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 20 mm. The ends are rounded to facilitate the connection of the two tubes.

Inline tube adapter ⌀154 mm to ⌀80 mm in STL 3D format. Total length of this fitting is 90 mm. The larger-diameter tube has a thickness of 3.9 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are rounded on the outside to ease the connection.

Inline tube reducer ⌀154 mm to ⌀108 mm in STL 3D format. Total length of this adapter is 120 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are raw.

Tube reducer ⌀154 mm to ⌀98 mm in STL 3D format. Final length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends have no fillet.

Tube fitting ⌀154 mm to ⌀108 mm in STL 3D format. Final length of this sleeve is 117 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are not rounded.

Tube coupler ⌀154 mm to ⌀107 mm in STL format. Total length of this sleeve is 120 mm. The larger-diameter tube has a thickness of 3 mm and a length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are raw.

Straight tubing adapter ⌀154 mm to ⌀99 mm in STL 3D format. Total length of this coupler is 120 mm. The larger-diameter tube has a thickness of 3 mm and a sleeve length of 35 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 35 mm as well. The ends are raw.

Straight tube connector ⌀154 mm to ⌀102 mm in STL format. Length of this connector is 120 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends have no fillet.

Inline tube adapter ⌀154 mm to ⌀137 mm in STL format. Length of this reducer is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tube coupler ⌀154 mm to ⌀137 mm in STL format. Length of this reducer is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 25 mm. The ends are raw.

Tube connector ⌀155 mm to ⌀90 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends feature an external fillet.

Inline tube adapter ⌀155 mm to ⌀90 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Straight tube coupler ⌀155 mm to ⌀90 mm in STL 3D format. Total length of this connector is 160 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The two axes of the tubes are off-center by 25.4 mm. The ends are not rounded.

Straight tube adapter ⌀155 mm to ⌀90 mm in STL 3D format. Length of this coupler is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 25.4 mm. The ends have no fillet.

Tubing adapter ⌀155 mm to ⌀90 mm in STL 3D format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The axes of the tubes are off-center by 25.4 mm. The ends have no fillet.

Inline tube junction ⌀155 mm to ⌀103 mm in STL format. Final length of this reducer is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 25.4 mm. The ends have a fillet to facilitate the connection of the two tubes.

Tubing reducer ⌀155 mm to ⌀103 mm in STL 3D format. Length of this reducer is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are rounded to make tube connection easier.

Inline tubing adapter ⌀155 mm to ⌀105 mm in STL 3D format. Final length of this coupler is 205 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 70 mm, the smaller one of 40 mm. The two axes of the tubes are off-center by 23.9 mm. The ends feature a fillet to make tube connection easier.

Tube connector ⌀155 mm to ⌀130 mm in STL format. Final length of this connector is 85 mm. The larger-diameter tube has a thickness of 2 mm and a length of 30 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 30 mm as well. The ends are not rounded.

Tube junction ⌀155 mm to ⌀130 mm in STL format. Final length of this coupler is 95 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends are not rounded.

Tube fitting ⌀155 mm to ⌀129 mm in STL 3D format. Length of this connector is 85 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube adapter ⌀155 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 30 mm. The ends are raw.