Inline tube adapter 3D Files - Side A outer diameter 150 to 200 mm | page 2

Inline tubing adapter ⌀153 mm to ⌀152 mm in STL 3D format. Length of this sleeve is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 28 mm. The ends have a fillet to make tube connection easier.

Straight sleeve ⌀154 mm to ⌀133 mm in STL 3D format. Length of this connector is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 20 mm. The ends are rounded to facilitate the connection of the two tubes.

Tube connector ⌀155 mm to ⌀90 mm in STL 3D format. Final length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends feature an external fillet.

Inline tube adapter ⌀155 mm to ⌀90 mm in STL 3D format. Length of this reducer is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 50 mm. The ends are rounded on the outside to facilitate the connection of the two tubes.

Straight tube coupler ⌀155 mm to ⌀90 mm in STL 3D format. Total length of this connector is 160 mm. The larger-diameter tube has a thickness of 4 mm and a length of 60 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 40 mm. The two axes of the tubes are off-center by 25.4 mm. The ends are not rounded.

Straight tube adapter ⌀155 mm to ⌀90 mm in STL 3D format. Length of this coupler is 160 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 25.4 mm. The ends have no fillet.

Tubing adapter ⌀155 mm to ⌀90 mm in STL 3D format. Total length of this adapter is 100 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 20 mm. The axes of the tubes are off-center by 25.4 mm. The ends have no fillet.

Inline tube junction ⌀155 mm to ⌀103 mm in STL format. Final length of this reducer is 130 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The two axes of the tubes are offset by 25.4 mm. The ends have a fillet to facilitate the connection of the two tubes.

Tubing reducer ⌀155 mm to ⌀103 mm in STL 3D format. Length of this reducer is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 60 mm, the smaller one of 60 mm as well. The ends are rounded to make tube connection easier.

Tube connector ⌀157 mm to ⌀117 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Tube adapter ⌀158 mm to ⌀118 mm in STL format. Final length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline fitting ⌀158 mm to ⌀118 mm in STL format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Diameter adapter ⌀158 mm to ⌀96 mm in STL 3D format. Total length of this junction is 152 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight sleeve ⌀159 mm to ⌀117 mm in STL format. Total length of this sleeve is 105 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have no fillet.

Inline tube adapter ⌀160 mm to ⌀90 mm in STL 3D format. Final length of this reducer is 250 mm. The larger-diameter tube has a thickness of 4 mm and a length of 110 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 100 mm. The axes of the tubes are off-center by 25.4 mm. The ends are rounded to make tube connection easier.

Straight sleeve ⌀160 mm to ⌀90 mm in STL 3D format. Final length of this adapter is 250 mm. The larger-diameter tube has a thickness of 4 mm and a length of 110 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 100 mm. The axes of the tubes are offset by 25.4 mm. The ends have no fillet.

Tube adapter ⌀160 mm to ⌀110 mm in STL 3D format. Total length of this fitting is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Straight tube fitting ⌀161 mm to ⌀96 mm in STL format. Final length of this reducer is 150 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends have no fillet.

Inline tube coupler ⌀163 mm to ⌀154 mm in STL 3D format. Length of this sleeve is 100 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 40 mm. The ends are rounded on the outside to ease the connection.

Inline tube reducer ⌀163 mm to ⌀154 mm in STL format. Final length of this connector is 78 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends feature an external fillet to make tube connection easier.

Diameter adapter ⌀165 mm to ⌀154 mm in STL 3D format. Final length of this reducer is 78 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 30 mm. The ends are raw.

Inline tubing adapter ⌀167 mm to ⌀155 mm in STL format. Final length of this reducer is 70 mm. The thickness of the tubes is identical: 2.4 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.

Tube reducer ⌀170 mm to ⌀154 mm in STL format. Length of this connector is 70 mm. The thickness of the tubes is identical: 2.5 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Straight tube adapter ⌀180 mm to ⌀16 mm in STL format. Final length of this fitting is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are not rounded.

Straight sleeve ⌀180 mm to ⌀60 mm in STL 3D format. Final length of this junction is 150 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 30 mm. The ends are raw.

Tube adapter ⌀183 mm to ⌀90 mm in STL 3D format. Length of this sleeve is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 17 mm. The ends are not rounded.

Tube adapter ⌀183 mm to ⌀97 mm in STL 3D format. Final length of this junction is 117 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 17 mm. The ends are rounded on the inside to make tube connection easier.

Straight tubing adapter ⌀183 mm to ⌀97 mm in STL format. Final length of this connector is 300 mm. The thickness of the tubes is identical: 6 mm. The larger-diameter tube has a sleeve length of 100 mm, the smaller one of 100 mm as well. The ends have a fillet on the inside to make tube connection easier.

Inline fitting ⌀190 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 112 mm. The thickness of the tubes is identical: 2.2 mm. The larger-diameter tube has a length of 32 mm, the smaller one of 30 mm. The axes of the tubes are offset by 32 mm. The ends are not rounded.

Tube coupler ⌀196 mm to ⌀125 mm in STL 3D format. Length of this sleeve is 125 mm. The thickness of the tubes is identical: 2.0 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 34 mm. The ends are raw.