Inline tube adapter 3D Files - Side A outer diameter 100 to 150 mm | page 8

Straight tube coupler ⌀120 mm to ⌀16 mm in STL format. Final length of this sleeve is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 5 mm as well. The ends are not rounded.

Inline tube coupler ⌀120 mm to ⌀16 mm in STL 3D format. Length of this adapter is 30 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 10 mm. The ends have a fillet to ease the connection.

Straight tube connector ⌀120 mm to ⌀93 mm in STL format. Length of this adapter is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tube adapter ⌀120 mm to ⌀10 mm in STL 3D format. Final length of this sleeve is 155 mm. The larger-diameter tube has a thickness of 20 mm and a length of 5 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 50 mm. The ends are not rounded.

Tube adapter ⌀120 mm to ⌀80 mm in STL 3D format. Final length of this connector is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline sleeve ⌀120 mm to ⌀100 mm in STL 3D format. Length of this coupler is 152 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Tube junction ⌀120 mm to ⌀100 mm in STL 3D format. Final length of this coupler is 40 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are rounded to facilitate the connection of the two tubes.

Straight tube coupler ⌀120 mm to ⌀74 mm in STL 3D format. Length of this coupler is 45 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 5 mm. The smaller-diameter tube has a thickness of 3 mm and a length of 10 mm. The ends have no fillet.

Diameter adapter ⌀120 mm to ⌀61 mm in STL 3D format. Total length of this adapter is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Tube adapter ⌀120 mm to ⌀96 mm in STL 3D format. Length of this adapter is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 60 mm. The axes of the tubes are offset by 11 mm. The ends are not rounded.

Tube adapter ⌀120 mm to ⌀96 mm in STL format. Final length of this reducer is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 60 mm. The two axes of the tubes are offset by 11.9 mm. The ends are raw.

Tube fitting ⌀120 mm to ⌀42 mm in STL 3D format. Length of this reducer is 110 mm. The thickness of the tubes is identical: 10 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends feature an internal fillet to ease the connection.

Tube reducer ⌀120 mm to ⌀32 mm in STL format. Total length of this adapter is 109 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 29 mm, the smaller one of 30 mm. The ends feature an internal fillet.

Tubing reducer ⌀120 mm to ⌀32 mm in STL 3D format. Total length of this reducer is 109 mm. The larger-diameter tube has a thickness of 3 mm and a length of 29 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm. The ends have a fillet on the inside.

Tube fitting ⌀121 mm to ⌀78 mm in STL format. Final length of this sleeve is 140 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are offset by 21.4 mm. The ends have a fillet on the outside to ease the connection.

Straight tube adapter ⌀121 mm to ⌀110 mm in STL format. Length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube reducer ⌀122 mm to ⌀78 mm in STL format. Final length of this fitting is 105 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are raw.

Straight tube coupler ⌀122 mm to ⌀92 mm in STL 3D format. Final length of this adapter is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have a fillet to facilitate the connection of the two tubes.

Tube connector ⌀122 mm to ⌀92 mm in STL format. Length of this fitting is 50 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Inline sleeve ⌀122 mm to ⌀74 mm in STL 3D format. Total length of this sleeve is 15 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The ends are raw.

Inline sleeve ⌀122 mm to ⌀74 mm in STL 3D format. Final length of this coupler is 25 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The ends are raw.

Diameter adapter ⌀122 mm to ⌀75 mm in STL 3D format. Final length of this adapter is 30 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are off-center by 23.4 mm. The ends are raw.

Tube fitting ⌀123 mm to ⌀58 mm in STL format. Length of this sleeve is 85 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends are not rounded.

Inline tube junction ⌀123 mm to ⌀58 mm in STL 3D format. Final length of this junction is 70 mm. The larger-diameter tube has a thickness of 5 mm and a length of 25 mm. The smaller-diameter tube has a thickness of 4 mm and a length of 25 mm as well. The ends feature a fillet to make tube connection easier.

Straight tube adapter ⌀123 mm to ⌀58 mm in STL format. Length of this reducer is 120 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The two axes of the tubes are off-center by 4.9 mm. The ends feature a fillet to facilitate the connection of the two tubes.

Inline tube junction ⌀123 mm to ⌀93 mm in STL 3D format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 24 mm. The ends are raw.

Tube coupler ⌀123 mm to ⌀94 mm in STL format. Total length of this sleeve is 59 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 24 mm. The ends are raw.

Tube fitting ⌀123 mm to ⌀92 mm in STL 3D format. Length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are raw.

Straight tube reducer ⌀123 mm to ⌀93 mm in STL format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Inline fitting ⌀123 mm to ⌀92 mm in STL format. Length of this fitting is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.