Washer, Flat gasket, Ring 3D Files - Inner diameter 30 to 50 mm | page 2
Model(s) 31 to 52 of 52
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 56 mm thickness: 20 mm (📦 #8814)
1 object(s) - format STL
3D model of washer / gasket in STL file format. This part features an inner diameter of ⌀40 mm and an outer diameter of ⌀56 mm. The thickness is 20 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40 | mm |
| outer diameter | 56 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets (📦 #9187)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀40 mm and an outer diameter of ⌀50 mm. The part thickness is 8 mm. Fillets are applied on the outer diameter, each with a value of 0.1 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40 | mm |
| outer diameter | 50 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 50 mm thickness: 8 mm + fillets (📦 #9188)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This model has an internal diameter of ⌀40 mm and an external diameter of ⌀50 mm. The total thickness is 8 mm. Fillets are applied on the internal diameter, each with a value of 3 mm. These finishes are present on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40 | mm |
| outer diameter | 50 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | two sides | |
| finish value | 3 | mm |
Washer / Flat Gasket STL file ⌀ID: 40.5 mm ⌀OD: 58 mm thickness: 3 mm (📦 #6159)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀40.5 mm and an outer diameter of ⌀58 mm. The part thickness is 3 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40.5 | mm |
| outer diameter | 58 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 41 mm ⌀OD: 48 mm thickness: 4 mm (📦 #3080)
1 object(s) - format STL
File of flat gasket / washer in STL format. This part features an internal diameter of ⌀41 mm and an external diameter of ⌀48 mm. The part thickness is 4 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 41 | mm |
| outer diameter | 48 | mm |
| thickness | 4 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 41 mm ⌀OD: 47 mm thickness: 8 mm + fillets (📦 #4972)
1 object(s) - format STL
Download this 3D model of washer / flat gasket in STL 3D file format. This part features an inner diameter of ⌀41 mm and an outer diameter of ⌀47 mm. The part thickness is 8 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.9 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 41 | mm |
| outer diameter | 47 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.9 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 41 mm ⌀OD: 56 mm thickness: 20 mm (📦 #8818)
1 object(s) - format STL
Download this 3D model of washer / flat gasket in STL file format. This part has an internal diameter of ⌀41 mm and an external diameter of ⌀56 mm. The part thickness is 20 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 41 | mm |
| outer diameter | 56 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 41.5 mm ⌀OD: 58 mm thickness: 3 mm (📦 #6160)
1 object(s) - format STL
3D model of washer / gasket in STL format. This model features an internal diameter of ⌀41.5 mm and an external diameter of ⌀58 mm. The thickness is 3 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 41.5 | mm |
| outer diameter | 58 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 41.5 mm ⌀OD: 63 mm thickness: 5 mm (📦 #6480)
1 object(s) - format STL
File of washer / flat gasket in STL format. This part features an inner diameter of ⌀41.5 mm and an outer diameter of ⌀63 mm. The total thickness is 5 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 41.5 | mm |
| outer diameter | 63 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 42 mm ⌀OD: 46 mm thickness: 20 mm + fillet (📦 #3263)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL format. This model features an inner diameter of ⌀42 mm and an outer diameter of ⌀46 mm. The thickness is 20 mm. A fillet is applied on the inner diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 42 | mm |
| outer diameter | 46 | mm |
| thickness | 20 | mm |
| finish | fillet | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL file ⌀ID: 42 mm ⌀OD: 46 mm thickness: 8 mm + fillets (📦 #4968)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This model has an internal diameter of ⌀42 mm and an external diameter of ⌀46 mm. The total thickness is 8 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.9 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 42 | mm |
| outer diameter | 46 | mm |
| thickness | 8 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.9 | mm |
Washer / Flat Gasket STL file ⌀ID: 42 mm ⌀OD: 55 mm thickness: 20 mm (📦 #8813)
1 object(s) - format STL
3D model of washer / flat gasket in STL file format. This part has an internal diameter of ⌀42 mm and an external diameter of ⌀55 mm. The total thickness is 20 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 42 | mm |
| outer diameter | 55 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 42 mm ⌀OD: 44 mm thickness: 10 mm + chamfer (📦 #9269)
1 object(s) - format STL
Download this model of flat gasket / washer in STL format. This part features an internal diameter of ⌀42 mm and an external diameter of ⌀44 mm. The part thickness is 10 mm. A chamfer is applied on the external diameter with a value of 0.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 42 | mm |
| outer diameter | 44 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 42.1 mm ⌀OD: 50.5 mm thickness: 4.3 mm (📦 #4638)
1 object(s) - format STL
Download this file of washer / gasket in STL 3D file format. This model features an internal diameter of ⌀42.1 mm and an external diameter of ⌀50.5 mm. The total thickness is 4.3 mm. This part has no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 42.1 | mm |
| outer diameter | 50.5 | mm |
| thickness | 4.3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 46 mm ⌀OD: 56 mm thickness: 5 mm (📦 #9943)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This model has an internal diameter of ⌀46 mm and an external diameter of ⌀56 mm. The part thickness is 5 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 46 | mm |
| outer diameter | 56 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 46 mm ⌀OD: 49 mm thickness: 10 mm (📦 #10215)
1 object(s) - format STL
File of washer / flat gasket in STL file format. This part features an inner diameter of ⌀46 mm and an outer diameter of ⌀49 mm. The thickness is 10 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 46 | mm |
| outer diameter | 49 | mm |
| thickness | 10 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 47 mm ⌀OD: 62 mm thickness: 20 mm (📦 #9134)
1 object(s) - format STL
3D model of washer / flat gasket in STL 3D file format. This part has an inner diameter of ⌀47 mm and an outer diameter of ⌀62 mm. The part thickness is 20 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 47 | mm |
| outer diameter | 62 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 47.5 mm ⌀OD: 62.5 mm thickness: 1 mm (📦 #8089)
1 object(s) - format STL
Download this model of flat gasket / washer in STL file format. This model features an inner diameter of ⌀47.5 mm and an outer diameter of ⌀62.5 mm. The part thickness is 1 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 47.5 | mm |
| outer diameter | 62.5 | mm |
| thickness | 1 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 47.5 mm ⌀OD: 62 mm thickness: 1.2 mm (📦 #8292)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL format. This model has an inner diameter of ⌀47.5 mm and an outer diameter of ⌀62 mm. The part thickness is 1.2 mm. There is no finish available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 47.5 | mm |
| outer diameter | 62 | mm |
| thickness | 1.2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 47.5 mm ⌀OD: 62 mm thickness: 1.4 mm (📦 #8293)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This part features an internal diameter of ⌀47.5 mm and an external diameter of ⌀62 mm. The part thickness is 1.4 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 47.5 | mm |
| outer diameter | 62 | mm |
| thickness | 1.4 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 48 mm ⌀OD: 60 mm thickness: 20 mm (📦 #9150)
1 object(s) - format STL
Model of gasket / washer in STL format. This part has an internal diameter of ⌀48 mm and an external diameter of ⌀60 mm. The total thickness is 20 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 48 | mm |
| outer diameter | 60 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 48 mm ⌀OD: 82 mm thickness: 1.6 mm (📦 #10182)
1 object(s) - format STL
3D model of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀48 mm and an outer diameter of ⌀82 mm. The total thickness is 1.6 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 48 | mm |
| outer diameter | 82 | mm |
| thickness | 1.6 | mm |
| finish | none |
Can't find the right model?
Create it with your specs