Washer, Flat gasket, Ring 3D Files - Inner diameter 30 to 50 mm | page 1

Model(s) 1 to 30 of 51

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 4 mm
finish fillet
finish position outer
sides one side
finish value 1 mm

Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers (📦 #1698)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + chamfers
3D model of washer / gasket in STL format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The part thickness is 4 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on the top and bottom.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 4 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers (📦 #1699)

1 object(s) - format STL (5.0/5) 1 vote(s)
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 6 mm + chamfers
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 6 mm. Chamfers are present on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 6 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 55 mm thickness: 5 mm (📦 #3026)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 30 mm ⌀OD: 55 mm thickness: 5 mm
3D file of gasket / washer in STL format. This part has an internal diameter of ⌀30 mm and an external diameter of ⌀55 mm. The part thickness is 5 mm. No finish is present.
Parameter Value Unit
inner diameter 30 mm
outer diameter 55 mm
thickness 5 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 88 mm thickness: 20 mm + chamfers (📦 #4443)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 88 mm thickness: 20 mm + chamfers
Model of washer / gasket in STL format. This part features an inner diameter of ⌀30 mm and an outer diameter of ⌀88 mm. The thickness is 20 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are applied on both sides.
Parameter Value Unit
inner diameter 30 mm
outer diameter 88 mm
thickness 20 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 10 mm + chamfers (📦 #5014)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 10 mm + chamfers
Download this file of gasket / washer in STL format. This part features an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 10 mm. Chamfers are applied on the outer diameter, each with a value of 1.5 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 30 mm
outer diameter 40 mm
thickness 10 mm
finish chamfer
finish position outer
sides two sides
finish value 1.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 30.5 mm ⌀OD: 31.5 mm thickness: 0.5 mm + chamfers (📦 #3594)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 30.5 mm ⌀OD: 31.5 mm thickness: 0.5 mm + chamfers
Download this 3D model of flat gasket / washer in STL file format. This model has an inner diameter of ⌀30.5 mm and an outer diameter of ⌀31.5 mm. The total thickness is 0.5 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm.
Parameter Value Unit
inner diameter 30.5 mm
outer diameter 31.5 mm
thickness 0.5 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL 3D file ⌀ID: 31 mm ⌀OD: 67 mm thickness: 5 mm (📦 #4336)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 31 mm ⌀OD: 67 mm thickness: 5 mm
Download this 3D file of washer / gasket in STL file format. This model has an inner diameter of ⌀31 mm and an outer diameter of ⌀67 mm. The part thickness is 5 mm. No finish is present.
Parameter Value Unit
inner diameter 31 mm
outer diameter 67 mm
thickness 5 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 31.5 mm ⌀OD: 37 mm thickness: 2 mm + chamfers (📦 #6361)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 31.5 mm ⌀OD: 37 mm thickness: 2 mm + chamfers
3D file of gasket / washer in STL file format. This model has an internal diameter of ⌀31.5 mm and an external diameter of ⌀37 mm. The thickness is 2 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both faces.
Parameter Value Unit
inner diameter 31.5 mm
outer diameter 37 mm
thickness 2 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 0.5 mm

Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 48 mm thickness: 6 mm (📦 #1831)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 48 mm thickness: 6 mm
Download this 3D model of gasket / washer in STL 3D file format. This part features an inner diameter of ⌀32 mm and an outer diameter of ⌀48 mm. The total thickness is 6 mm. There is no finish present.
Parameter Value Unit
inner diameter 32 mm
outer diameter 48 mm
thickness 6 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 41 mm thickness: 4 mm + fillet (📦 #6721)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 41 mm thickness: 4 mm + fillet
File of washer / gasket in STL 3D file format. This model has an internal diameter of ⌀32 mm and an external diameter of ⌀41 mm. The total thickness is 4 mm. A fillet is applied on the internal diameter with a value of 0.1 mm.
Parameter Value Unit
inner diameter 32 mm
outer diameter 41 mm
thickness 4 mm
finish fillet
finish position inner
sides one side
finish value 0.1 mm

Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 50 mm thickness: 12 mm (📦 #9881)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 32 mm ⌀OD: 50 mm thickness: 12 mm
File of gasket / washer in STL file format. This part has an inner diameter of ⌀32 mm and an outer diameter of ⌀50 mm. The total thickness is 12 mm. This part has no finish available.
Parameter Value Unit
inner diameter 32 mm
outer diameter 50 mm
thickness 12 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 33.5 mm ⌀OD: 38 mm thickness: 8 mm (📦 #4910)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 33.5 mm ⌀OD: 38 mm thickness: 8 mm
Download this file of washer / flat gasket in STL file format. This model features an inner diameter of ⌀33.5 mm and an outer diameter of ⌀38 mm. The total thickness is 8 mm. No finish is applied.
Parameter Value Unit
inner diameter 33.5 mm
outer diameter 38 mm
thickness 8 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 34 mm ⌀OD: 37 mm thickness: 3 mm + chamfers (📦 #6363)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 34 mm ⌀OD: 37 mm thickness: 3 mm + chamfers
Model of flat gasket / washer in STL file format. This model has an internal diameter of ⌀34 mm and an external diameter of ⌀37 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are applied on both faces.
Parameter Value Unit
inner diameter 34 mm
outer diameter 37 mm
thickness 3 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 0.5 mm

Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 45 mm thickness: 15 mm + chamfers (📦 #7839)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 45 mm thickness: 15 mm + chamfers
Download this model of flat gasket / washer in STL format. This model features an internal diameter of ⌀35 mm and an external diameter of ⌀45 mm. The part thickness is 15 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 0.3 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 35 mm
outer diameter 45 mm
thickness 15 mm
finish chamfer
finish position inner + oute...
sides two sides
finish value 0.3 mm

Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 70 mm thickness: 3 mm + chamfer (📦 #9036)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 35 mm ⌀OD: 70 mm thickness: 3 mm + chamfer
3D model of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀35 mm and an outer diameter of ⌀70 mm. The total thickness is 3 mm. A chamfer is present on the outer diameter with a value of 2.9 mm.
Parameter Value Unit
inner diameter 35 mm
outer diameter 70 mm
thickness 3 mm
finish chamfer
finish position outer
sides one side
finish value 2.9 mm

Washer / Flat Gasket STL file ⌀ID: 36 mm ⌀OD: 46 mm thickness: 5 mm (📦 #9944)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 36 mm ⌀OD: 46 mm thickness: 5 mm
Download this 3D file of flat gasket / washer in STL file format. This model features an internal diameter of ⌀36 mm and an external diameter of ⌀46 mm. The part thickness is 5 mm. There is no finish available.
Parameter Value Unit
inner diameter 36 mm
outer diameter 46 mm
thickness 5 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 36.5 mm ⌀OD: 61.5 mm thickness: 1.5 mm (📦 #2780)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 36.5 mm ⌀OD: 61.5 mm thickness: 1.5 mm
Download this file of washer / flat gasket in STL file format. This part has an internal diameter of ⌀36.5 mm and an external diameter of ⌀61.5 mm. The part thickness is 1.5 mm. This part has no finish applied.
Parameter Value Unit
inner diameter 36.5 mm
outer diameter 61.5 mm
thickness 1.5 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 37 mm ⌀OD: 39 mm thickness: 10 mm + fillets (📦 #9274)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 37 mm ⌀OD: 39 mm thickness: 10 mm + fillets
Download this 3D file of gasket / washer in STL file format. This model has an inner diameter of ⌀37 mm and an outer diameter of ⌀39 mm. The part thickness is 10 mm. Fillets are applied on the outer diameter, each with a value of 0.9 mm. These finishes are present on both faces.
Parameter Value Unit
inner diameter 37 mm
outer diameter 39 mm
thickness 10 mm
finish fillet
finish position outer
sides two sides
finish value 0.9 mm

Washer / Flat Gasket STL file ⌀ID: 37 mm ⌀OD: 39 mm thickness: 10 mm (📦 #9275)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 37 mm ⌀OD: 39 mm thickness: 10 mm
File of gasket / washer in STL 3D file format. This model features an inner diameter of ⌀37 mm and an outer diameter of ⌀39 mm. The part thickness is 10 mm. This part has no finish present.
Parameter Value Unit
inner diameter 37 mm
outer diameter 39 mm
thickness 10 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 37.6 mm ⌀OD: 50.2 mm thickness: 5 mm (📦 #5471)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 37.6 mm ⌀OD: 50.2 mm thickness: 5 mm
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an internal diameter of ⌀37.6 mm and an external diameter of ⌀50.2 mm. The part thickness is 5 mm. This part has no finish present.
Parameter Value Unit
inner diameter 37.6 mm
outer diameter 50.2 mm
thickness 5 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 38 mm ⌀OD: 57 mm thickness: 20 mm (📦 #8812)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 38 mm ⌀OD: 57 mm thickness: 20 mm
3D file of flat gasket / washer in STL file format. This model features an inner diameter of ⌀38 mm and an outer diameter of ⌀57 mm. The thickness is 20 mm. No finish is present.
Parameter Value Unit
inner diameter 38 mm
outer diameter 57 mm
thickness 20 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 38.2 mm ⌀OD: 43 mm thickness: 3 mm (📦 #1952)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 38.2 mm ⌀OD: 43 mm thickness: 3 mm
3D file of washer / flat gasket in STL format. This part has an internal diameter of ⌀38.2 mm and an external diameter of ⌀43 mm. The part thickness is 3 mm. This part has no finish present.
Parameter Value Unit
inner diameter 38.2 mm
outer diameter 43 mm
thickness 3 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 38.2 mm ⌀OD: 50.2 mm thickness: 5 mm (📦 #5538)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 38.2 mm ⌀OD: 50.2 mm thickness: 5 mm
Download this 3D model of gasket / washer in STL format. This model has an internal diameter of ⌀38.2 mm and an external diameter of ⌀50.2 mm. The total thickness is 5 mm. This part has no finish present.
Parameter Value Unit
inner diameter 38.2 mm
outer diameter 50.2 mm
thickness 5 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 2 mm (📦 #1761)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 2 mm
3D file of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀38.6 mm and an outer diameter of ⌀42.8 mm. The part thickness is 2 mm. There is no finish applied.
Parameter Value Unit
inner diameter 38.6 mm
outer diameter 42.8 mm
thickness 2 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 0.8 mm (📦 #1763)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 38.6 mm ⌀OD: 42.8 mm thickness: 0.8 mm
3D model of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀38.6 mm and an outer diameter of ⌀42.8 mm. The part thickness is 0.8 mm. There is no finish available.
Parameter Value Unit
inner diameter 38.6 mm
outer diameter 42.8 mm
thickness 0.8 mm
finish none

Washer / Flat Gasket STL file ⌀ID: 38.7 mm ⌀OD: 42.8 mm thickness: 1 mm (📦 #1762)

1 object(s) - format STL
Washer / Flat Gasket STL file ⌀ID: 38.7 mm ⌀OD: 42.8 mm thickness: 1 mm
File of gasket / washer in STL file format. This model has an internal diameter of ⌀38.7 mm and an external diameter of ⌀42.8 mm. The part thickness is 1 mm. There is no finish available.
Parameter Value Unit
inner diameter 38.7 mm
outer diameter 42.8 mm
thickness 1 mm
finish none

Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 42 mm thickness: 5 mm + fillets (📦 #3595)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 42 mm thickness: 5 mm + fillets
File of washer / flat gasket in STL format. This part features an internal diameter of ⌀40 mm and an external diameter of ⌀42 mm. The part thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.4 mm.
Parameter Value Unit
inner diameter 40 mm
outer diameter 42 mm
thickness 5 mm
finish fillet
finish position inner + oute...
sides one side
finish value 0.4 mm

Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 45 mm thickness: 8 mm + chamfers (📦 #4962)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 45 mm thickness: 8 mm + chamfers
Download this model of gasket / washer in STL file format. This part has an internal diameter of ⌀40 mm and an external diameter of ⌀45 mm. The part thickness is 8 mm. Chamfers are present on the external diameter, each with a value of 2 mm. These finishes are present on the top and bottom.
Parameter Value Unit
inner diameter 40 mm
outer diameter 45 mm
thickness 8 mm
finish chamfer
finish position outer
sides two sides
finish value 2 mm

Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 107 mm thickness: 4 mm + chamfers (📦 #6712)

1 object(s) - format STL
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 107 mm thickness: 4 mm + chamfers
Download this 3D model of washer / gasket in STL format. This model features an internal diameter of ⌀40 mm and an external diameter of ⌀107 mm. The total thickness is 4 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm.
Parameter Value Unit
inner diameter 40 mm
outer diameter 107 mm
thickness 4 mm
finish chamfer
finish position inner + oute...
sides one side
finish value 0.3 mm
Can't find the right model? Create it with your specs