Custom Washer / Flat Gasket STL 3D file ⌀ID: 30.5 mm ⌀OD: 31.5 mm thickness: 0.5 mm + chamfers 📦#3594
Generation date: 2025-11-24
3D model download
Free- washer-flat-gasket-ring-inD30._model3594-nb0_dd{id}.stl : 147.7 Ko
STL
Mesh quality :
0.0005
0.05
No compliance warranty
License: CC0 - Creative commons
(no copyright - public domain)
Safe download
Values for this model
This model was generated by the Washer, Flat gasket, Ring template, with the following values:
| Parameter | Value | |
|---|---|---|
| #1 | inner diameter | 30.5 mm (≃1 3/16 in) |
| #2 | outer diameter | 31.5 mm (≃1 1/4 in) |
| #3 | thickness | 0.5 mm (≃0.02 in) |
| #4 | finish | chamfer |
| #5 | finish position | inner + outer |
| #6 | sides | one side |
| #7 | finish value | 0.1 mm (<0.01 in) |
Parameter overview
Labels are used in the naming of the downloaded 3D files.
| Parameter | Label |
|---|---|
| #1 inner diameter | inD |
| #2 outer diameter | ouD |
| #3 thickness | thi |
| #4 finish | edgF |
| #5 finish position | edgP |
| #6 sides | sidC |
| #7 finish value | finV |
Related 3D models
To search for a model based on your own parameters, go to the template page Washer, Flat gasket, Ring
Washer / Flat Gasket STL 3D file ⌀ID: 25 mm ⌀OD: 35 mm thickness: 3 mm + chamfer (📦 #1906)
1 object(s) - format STL
File of gasket / washer in STL file format. This part features an internal diameter of ⌀25 mm and an external diameter of ⌀35 mm. The part thickness is 3 mm. A chamfer is applied on the external diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 25 | mm |
| outer diameter | 35 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 9 mm ⌀OD: 18 mm thickness: 2.8 mm + chamfer (📦 #3446)
1 object(s) - format STL
File of washer / gasket in STL 3D file format. This part has an internal diameter of ⌀9 mm and an external diameter of ⌀18 mm. The total thickness is 2.8 mm. A chamfer is applied on the external diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 18 | mm |
| thickness | 2.8 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 4 mm ⌀OD: 25 mm thickness: 2.8 mm + chamfer (📦 #3657)
1 object(s) - format STL
File of flat gasket / washer in STL format. This model features an inner diameter of ⌀4 mm and an outer diameter of ⌀25 mm. The part thickness is 2.8 mm. A chamfer is applied on the outer diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 4 | mm |
| outer diameter | 25 | mm |
| thickness | 2.8 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 4 mm ⌀OD: 25 mm thickness: 2.6 mm + chamfer (📦 #3660)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part has an inner diameter of ⌀4 mm and an outer diameter of ⌀25 mm. The part thickness is 2.6 mm. A chamfer is applied on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 4 | mm |
| outer diameter | 25 | mm |
| thickness | 2.6 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 4 mm ⌀OD: 10 mm thickness: 2.6 mm + chamfer (📦 #3704)
1 object(s) - format STL
Model of washer / gasket in STL 3D file format. This model features an inner diameter of ⌀4 mm and an outer diameter of ⌀10 mm. The part thickness is 2.6 mm. A chamfer is present on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 4 | mm |
| outer diameter | 10 | mm |
| thickness | 2.6 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL file ⌀ID: 5 mm ⌀OD: 10 mm thickness: 2.5 mm + fillets (📦 #2786)
1 object(s) - format STL
Model of washer / flat gasket in STL file format. This part features an internal diameter of ⌀5 mm and an external diameter of ⌀10 mm. The thickness is 2.5 mm. Fillets are present on both the internal diameter and the external diameter, each with a value of 0.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 5 | mm |
| outer diameter | 10 | mm |
| thickness | 2.5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 40 mm ⌀OD: 42 mm thickness: 5 mm + fillets (📦 #3595)
1 object(s) - format STL
File of washer / flat gasket in STL format. This part features an internal diameter of ⌀40 mm and an external diameter of ⌀42 mm. The part thickness is 5 mm. Fillets are applied on both the internal diameter and the external diameter, each with a value of 0.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 40 | mm |
| outer diameter | 42 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 74 mm thickness: 5 mm + chamfers (📦 #1819)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL file format. This part has an inner diameter of ⌀57 mm and an outer diameter of ⌀74 mm. The total thickness is 5 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 3.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 74 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 3.4 | mm |
Washer / Flat Gasket STL file ⌀ID: 60 mm ⌀OD: 60.1 mm thickness: 0.1 mm (📦 #1742)
1 object(s) - format STL
Model of flat gasket / washer in STL 3D file format. This model features an internal diameter of ⌀60 mm and an external diameter of ⌀60.1 mm. The total thickness is 0.1 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 60 | mm |
| outer diameter | 60.1 | mm |
| thickness | 0.1 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 30 mm ⌀OD: 40 mm thickness: 4 mm + fillet (📦 #1697)
1 object(s) - format STL
Download this 3D file of washer / gasket in STL file format. This part has an inner diameter of ⌀30 mm and an outer diameter of ⌀40 mm. The thickness is 4 mm. A fillet is applied on the outer diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 30 | mm |
| outer diameter | 40 | mm |
| thickness | 4 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 57 mm ⌀OD: 75 mm thickness: 5 mm + chamfers (📦 #1820)
1 object(s) - format STL
Model of washer / flat gasket in STL file format. This model has an internal diameter of ⌀57 mm and an external diameter of ⌀75 mm. The total thickness is 5 mm. Chamfers are applied on both the internal diameter and the external diameter, each with a value of 4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 57 | mm |
| outer diameter | 75 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 27 mm ⌀OD: 37 mm thickness: 1 mm + chamfers (📦 #3268)
1 object(s) - format STL (5.0/5) 1 vote(s)
Download this file of washer / flat gasket in STL format. This model has an inner diameter of ⌀27 mm and an outer diameter of ⌀37 mm. The total thickness is 1 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.4 mm. These finishes are applied on both faces.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 27 | mm |
| outer diameter | 37 | mm |
| thickness | 1 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 15 mm ⌀OD: 20 mm thickness: 2.5 mm + chamfer (📦 #3635)
1 object(s) - format STL
Download this model of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀15 mm and an outer diameter of ⌀20 mm. The total thickness is 2.5 mm. A chamfer is applied on the inner diameter with a value of 00.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 20 | mm |
| thickness | 2.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 00.4 | mm |
Washer / Flat Gasket STL file ⌀ID: 50 mm ⌀OD: 55 mm thickness: 5 mm + fillet (📦 #2271)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This model has an internal diameter of ⌀50 mm and an external diameter of ⌀55 mm. The total thickness is 5 mm. A fillet is present on the external diameter with a value of 1.5 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 50 | mm |
| outer diameter | 55 | mm |
| thickness | 5 | mm |
| finish | fillet | |
| finish position | outer | |
| sides | one side | |
| finish value | 1.5 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 22 mm ⌀OD: 25 mm thickness: 3 mm + chamfers (📦 #1881)
1 object(s) - format STL
Download this file of washer / gasket in STL format. This part has an internal diameter of ⌀22 mm and an external diameter of ⌀25 mm. The thickness is 3 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 22 | mm |
| outer diameter | 25 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 9 mm ⌀OD: 16 mm thickness: 3 mm + chamfer (📦 #3415)
1 object(s) - format STL
Download this model of flat gasket / washer in STL file format. This model has an inner diameter of ⌀9 mm and an outer diameter of ⌀16 mm. The thickness is 3 mm. A chamfer is present on the inner diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 9 | mm |
| outer diameter | 16 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 16 mm ⌀OD: 24 mm thickness: 3 mm + chamfers (📦 #1695)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The total thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 24 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.2 mm + chamfer (📦 #3452)
1 object(s) - format STL
3D file of flat gasket / washer in STL file format. This part has an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The part thickness is 2.2 mm. A chamfer is present on the internal diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.2 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |
Washer / Flat Gasket STL file ⌀ID: 8 mm ⌀OD: 15 mm thickness: 2.4 mm + chamfer (📦 #3450)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL 3D file format. This model features an internal diameter of ⌀8 mm and an external diameter of ⌀15 mm. The thickness is 2.4 mm. A chamfer is applied on the internal diameter with a value of 1.2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 8 | mm |
| outer diameter | 15 | mm |
| thickness | 2.4 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1.2 | mm |