?>

O-ring 3D Files - Inner diameter (ID) 50 to 100 mm | page 1

Model(s) 1 to 30 of 40

O-ring STL file ID 50 × CS 2.5 mm (📦 #1057)

1 object(s) - format STL
O-ring STL file ID 50 × CS 2.5 mm
3D file in STL format of rubber ring with ID (inner diameter) 50 mm / thickness 2.5 mm. Outer diameter (OD) resulting corresponds to 55 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 50 × CS 5 mm (📦 #1595)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5 mm
Model of circular seal with ID (inner diameter) 50 mm / thickness 5  mm. Final diameter corresponds to 60 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5 mm

O-ring STL file ID 50 × CS 3 mm (📦 #2430)

1 object(s) - format STL
O-ring STL file ID 50 × CS 3 mm
3D model in STL format of sealing ring with dimensions ID 50 mm by CS (cross section) 3  mm. Outer diameter (OD) is therefore 56 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3 mm

O-ring STL file ID 50 × CS 3.6 mm (📦 #3144)

1 object(s) - format STL
O-ring STL file ID 50 × CS 3.6 mm
3D file in STL format of O-ring with ID (inner diameter) 50 mm by CS 3.6  mm. External diameter (OD) resulting is therefore 57.2 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 3.6 mm

O-ring STL 3D file ID 50 × CS 5.3 mm (📦 #3248)

1 object(s) - format STL
O-ring STL 3D file ID 50 × CS 5.3 mm
3D file in STL format of circular seal with ID (inner diameter) 50 mm × CS 5.3  mm. Outer diameter (OD, for outer diameter) is therefore 60.6 mm.
Parameter Value Unit
inner diameter (ID) 50 mm
cross section (CS) 5.3 mm

O'ring STL 3D file ID 51 × CS 3.5 mm (📦 #3350)

1 object(s) - format STL
o'ring STL 3D file ID 51 × CS 3.5 mm
STL model of sealing ring with Inner diameter 51 mm / thickness 3.5  mm. Outer diameter (OD, for outer diameter) corresponds to 58 mm.
Parameter Value Unit
inner diameter (ID) 51 mm
cross section (CS) 3.5 mm

O-ring STL file ID 54 × CS 3 mm (📦 #1806)

1 object(s) - format STL
O-ring STL file ID 54 × CS 3 mm
Model of O-ring (torus-shaped seal) with Internal diameter 54 mm by CS 3  mm. The outer diameter resulting is 60 mm.
Parameter Value Unit
inner diameter (ID) 54 mm
cross section (CS) 3 mm

O-ring STL file ID 55 × CS 10 mm (📦 #3550)

1 object(s) - format STL
O-ring STL file ID 55 × CS 10 mm
3D model in STL format of O-ring (torus-shaped seal) with Internal diameter (ID) 55 mm × section thickness 10  mm. Outer diameter (OD) resulting is therefore 75 mm.
Parameter Value Unit
inner diameter (ID) 55 mm
cross section (CS) 10 mm

O-ring STL file ID 60 × CS 7 mm (📦 #1598)

1 object(s) - format STL
O-ring STL file ID 60 × CS 7 mm
Model of rubber ring with dimensions Internal diameter (ID) 60 mm × CS (cross section) 7  mm. Final diameter resulting is therefore 74 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 7 mm

O'ring STL 3D file ID 60 × CS 10 mm (📦 #3155)

1 object(s) - format STL
o'ring STL 3D file ID 60 × CS 10 mm
STL model of rubber ring with dimensions Internal diameter 60 mm / thickness 10  mm. External diameter (OD) corresponds to 80 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 10 mm

O-ring STL 3D file ID 60 × CS 2 mm (📦 #3666)

1 object(s) - format STL
O-ring STL 3D file ID 60 × CS 2 mm
3D file of circular seal with ID 60 mm by CS 2  mm. Outer diameter (OD, for outer diameter) resulting is therefore 64 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 2 mm

O-ring STL file ID 60 × CS 5 mm (📦 #3848)

1 object(s) - format STL
O-ring STL file ID 60 × CS 5 mm
3D model in STL format of sealing ring with dimensions ID 60 mm / CS (cross section) 5  mm. The outer diameter resulting is therefore 70 mm.
Parameter Value Unit
inner diameter (ID) 60 mm
cross section (CS) 5 mm

O-ring STL file ID 62 × CS 2 mm (📦 #3582)

1 object(s) - format STL
O-ring STL file ID 62 × CS 2 mm
STL model of rubber ring with dimensions Inner diameter 62 mm × section thickness 2  mm. Final diameter resulting corresponds to 66 mm.
Parameter Value Unit
inner diameter (ID) 62 mm
cross section (CS) 2 mm

O-ring STL file ID 62 × CS 4 mm (📦 #3586)

1 object(s) - format STL
O-ring STL file ID 62 × CS 4 mm
Model of O-ring (torus-shaped seal) with dimensions ID 62 mm by thickness 4  mm. External diameter (OD) resulting is 70 mm.
Parameter Value Unit
inner diameter (ID) 62 mm
cross section (CS) 4 mm

O'ring STL file ID 66 × CS 4 mm (📦 #3609)

1 object(s) - format STL
o'ring STL file ID 66 × CS 4 mm
STL model of sealing ring with ID (inner diameter) 66 mm × CS (cross section) 4  mm. The outer diameter corresponds to 74 mm.
Parameter Value Unit
inner diameter (ID) 66 mm
cross section (CS) 4 mm

O-ring STL file ID 67 × CS 7 mm (📦 #1995)

1 object(s) - format STL
O-ring STL file ID 67 × CS 7 mm
File of O-ring (torus-shaped seal) with dimensions Inner diameter 67 mm by CS (cross section) 7  mm. Outer diameter (OD) resulting corresponds to 81 mm.
Parameter Value Unit
inner diameter (ID) 67 mm
cross section (CS) 7 mm

O-ring STL file ID 69 × CS 6.5 mm (📦 #3815)

1 object(s) - format STL
O-ring STL file ID 69 × CS 6.5 mm
3D model in STL format of sealing ring with dimensions ID 69 mm × section thickness 6.5  mm. Final diameter resulting is 82 mm.
Parameter Value Unit
inner diameter (ID) 69 mm
cross section (CS) 6.5 mm

O-ring STL file ID 70 × CS 3.5 mm (📦 #1336)

1 object(s) - format STL
O-ring STL file ID 70 × CS 3.5 mm
3D file in STL format of rubber ring with dimensions Inner diameter 70 mm × CS 3.5  mm. The outer diameter resulting is 77 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 3.5 mm

O-ring STL 3D file ID 70 × CS 4 mm (📦 #1681)

1 object(s) - format STL
O-ring STL 3D file ID 70 × CS 4 mm
STL file of sealing ring with dimensions Internal diameter 70 mm / CS 4  mm. External diameter (OD) is therefore 78 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 4 mm

O-ring STL 3D file ID 70 × CS 10 mm (📦 #3156)

1 object(s) - format STL
O-ring STL 3D file ID 70 × CS 10 mm
3D model of rubber ring with ID (inner diameter) 70 mm by thickness 10  mm. Outer diameter (OD, for outer diameter) is 90 mm.
Parameter Value Unit
inner diameter (ID) 70 mm
cross section (CS) 10 mm

O-ring STL file ID 72.4 × CS 2.6 mm (📦 #2004)

1 object(s) - format STL
O-ring STL file ID 72.4 × CS 2.6 mm
3D file in STL format of sealing ring with Internal diameter 72.4 mm by thickness 2.6  mm. External diameter (OD) corresponds to 77.6 mm.
Parameter Value Unit
inner diameter (ID) 72.4 mm
cross section (CS) 2.6 mm

O-ring STL 3D file ID 73.2 × CS 7.7 mm (📦 #2089)

1 object(s) - format STL
O-ring STL 3D file ID 73.2 × CS 7.7 mm
3D file of O-ring with dimensions Inner diameter (ID) 73.2 mm × thickness 7.7  mm. Outer diameter (OD) resulting is therefore 88.6 mm.
Parameter Value Unit
inner diameter (ID) 73.2 mm
cross section (CS) 7.7 mm

O'ring STL file ID 74 × CS 1 mm (📦 #1519)

1 object(s) - format STL
o'ring STL file ID 74 × CS 1 mm
STL file of O-ring with ID (inner diameter) 74 mm by CS (cross section) 1  mm. External diameter (OD) corresponds to 76 mm.
Parameter Value Unit
inner diameter (ID) 74 mm
cross section (CS) 1 mm

O-ring STL 3D file ID 75 × CS 5.3 mm (📦 #3246)

1 object(s) - format STL
O-ring STL 3D file ID 75 × CS 5.3 mm
STL file of rubber ring with Internal diameter 75 mm × thickness 5.3  mm. Outer diameter (OD) is therefore 85.6 mm.
Parameter Value Unit
inner diameter (ID) 75 mm
cross section (CS) 5.3 mm

O-ring STL 3D file ID 76 × CS 9.5 mm (📦 #1637)

1 object(s) - format STL
O-ring STL 3D file ID 76 × CS 9.5 mm
STL model of circular seal with dimensions Inner diameter 76 mm by CS 9.5  mm. External diameter (OD) resulting corresponds to 95 mm.
Parameter Value Unit
inner diameter (ID) 76 mm
cross section (CS) 9.5 mm

O-ring STL 3D file ID 78 × CS 6 mm (📦 #1821)

1 object(s) - format STL
O-ring STL 3D file ID 78 × CS 6 mm
3D model in STL format of sealing ring with dimensions Internal diameter 78 mm by section thickness 6  mm. External diameter (OD) resulting corresponds to 90 mm.
Parameter Value Unit
inner diameter (ID) 78 mm
cross section (CS) 6 mm

O-ring STL file ID 78.5 × CS 5.8 mm (📦 #3251)

1 object(s) - format STL
O-ring STL file ID 78.5 × CS 5.8 mm
STL file of rubber ring with dimensions Internal diameter (ID) 78.5 mm by CS (cross section) 5.8  mm. Outer diameter (OD) resulting corresponds to 90.1 mm.
Parameter Value Unit
inner diameter (ID) 78.5 mm
cross section (CS) 5.8 mm

O'ring STL file ID 80 × CS 2.5 mm (📦 #1348)

1 object(s) - format STL
o'ring STL file ID 80 × CS 2.5 mm
3D model of O-ring (torus-shaped seal) with ID (inner diameter) 80 mm × CS 2.5  mm. Outer diameter (OD) is therefore 85 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 2.5 mm

O-ring STL 3D file ID 80 × CS 5 mm (📦 #1547)

1 object(s) - format STL
O-ring STL 3D file ID 80 × CS 5 mm
File of rubber ring with Internal diameter (ID) 80 mm by thickness 5  mm. Final diameter resulting is therefore 90 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 5 mm

O'ring STL 3D file ID 80 × CS 1 mm (📦 #2471)

1 object(s) - format STL
o'ring STL 3D file ID 80 × CS 1 mm
STL model of O-ring (torus-shaped seal) with Inner diameter 80 mm / section thickness 1  mm. External diameter (OD) corresponds to 82 mm.
Parameter Value Unit
inner diameter (ID) 80 mm
cross section (CS) 1 mm
Can't find the right model? Create it with your specs