Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 9

Tube reducer ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this reducer is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The axes of the tubes are off-center by 5.9 mm. The ends feature an external fillet.

Straight tube coupler ⌀94 mm to ⌀80 mm in STL 3D format. Final length of this adapter is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The axes of the tubes are offset by 5.9 mm. The ends have a fillet on the outside to ease the connection.

Straight sleeve ⌀95 mm to ⌀90 mm in STL format. Length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature an external fillet.

Inline tube coupler ⌀95 mm to ⌀54 mm in STL 3D format. Final length of this reducer is 75 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 25 mm as well. The two axes of the tubes are offset by 20 mm. The ends are not rounded.

Diameter adapter ⌀96 mm to ⌀80 mm in STL 3D format. Length of this junction is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends feature a fillet.

Straight sleeve ⌀96 mm to ⌀66 mm in STL 3D format. Total length of this adapter is 95 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 35 mm, the smaller one of 35 mm as well. The ends feature an external fillet to facilitate the connection of the two tubes.

Tube fitting ⌀96 mm to ⌀79 mm in STL format. Total length of this connector is 100 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are rounded.

Tubing adapter ⌀96 mm to ⌀79 mm in STL format. Length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends have a fillet to make tube connection easier.

Tubing adapter ⌀97 mm to ⌀70 mm in STL 3D format. Total length of this coupler is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Diameter adapter ⌀97 mm to ⌀65 mm in STL format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are not rounded.

Tubing reducer ⌀98 mm to ⌀80 mm in STL format. Total length of this adapter is 98 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 28 mm. The ends are rounded to facilitate the connection of the two tubes.

Tube coupler ⌀98 mm to ⌀56 mm in STL 3D format. Length of this reducer is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends are not rounded.

Tube adapter ⌀98 mm to ⌀80 mm in STL 3D format. Total length of this fitting is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 45 mm, the smaller one of 40 mm. The ends are not rounded.

Inline fitting ⌀99 mm to ⌀96 mm in STL 3D format. Total length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends have no fillet.

Tubing adapter ⌀99 mm to ⌀62 mm in STL 3D format. Total length of this fitting is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 35 mm as well. The ends are rounded on the inside.

Straight tubing adapter ⌀99 mm to ⌀80 mm in STL format. Final length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 45 mm, the smaller one of 40 mm. The ends are raw.