Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 6

Straight tube coupler ⌀33 mm to ⌀10 mm in STL 3D format. Length of this connector is 95 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 50 mm. The ends are raw.

Tube junction ⌀33 mm to ⌀10 mm in STL 3D format. Final length of this fitting is 250 mm. The larger-diameter tube has a thickness of 2.9 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 230 mm. The ends have no fillet.

Inline fitting ⌀33 mm to ⌀10 mm in STL format. Final length of this reducer is 260 mm. The larger-diameter tube has a thickness of 2.9 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 230 mm. The ends are not rounded.

Straight tube connector ⌀33 mm to ⌀18 mm in STL format. Length of this junction is 50 mm. The larger-diameter tube has a thickness of 2.9 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The ends are raw.

Straight tube adapter ⌀33 mm to ⌀26 mm in STL 3D format. Final length of this fitting is 50 mm. The larger-diameter tube has a thickness of 2.8 mm and a sleeve length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 20 mm. The ends are not rounded.

Tubing reducer ⌀33 mm to ⌀14 mm in STL format. Length of this coupler is 40 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 15 mm as well. The ends have no fillet.

Straight sleeve ⌀33 mm to ⌀28 mm in STL format. Length of this reducer is 170 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 80 mm, the smaller one of 80 mm as well. The ends have no fillet.

Tube reducer ⌀33 mm to ⌀24 mm in STL 3D format. Length of this coupler is 110 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.

Inline tube reducer ⌀33 mm to ⌀19 mm in STL format. Final length of this reducer is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 15 mm. The ends are not rounded.

Inline tube junction ⌀34 mm to ⌀27 mm in STL 3D format. Total length of this junction is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 15 mm, the smaller one of 15 mm as well. The ends have no fillet.

Tube adapter ⌀34 mm to ⌀15 mm in STL format. Total length of this connector is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The axes of the tubes are off-center by 9.4 mm. The ends have no fillet.

Inline sleeve ⌀34 mm to ⌀17 mm in STL 3D format. Final length of this fitting is 35 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 5 mm, the smaller one of 5 mm as well. The two axes of the tubes are offset by 8.4 mm. The ends have no fillet.

Straight tube adapter ⌀34 mm to ⌀20 mm in STL 3D format. Length of this adapter is 40 mm. The larger-diameter tube has a thickness of 4 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 5 mm and a length of 15 mm. The ends have a fillet to facilitate the connection of the two tubes.

Tube reducer ⌀35 mm to ⌀34 mm in STL 3D format. Final length of this adapter is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends feature a fillet.

Tube reducer ⌀35 mm to ⌀23 mm in STL format. Final length of this coupler is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet.

Straight tube connector ⌀35 mm to ⌀20 mm in STL format. Final length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends feature a fillet to make tube connection easier.

Inline tube reducer ⌀35 mm to ⌀19 mm in STL format. Length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 25 mm as well. The ends have a fillet to ease the connection.

Inline tube junction ⌀35 mm to ⌀30 mm in STL format. Total length of this adapter is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to make tube connection easier.

Inline tube reducer ⌀35 mm to ⌀29 mm in STL 3D format. Final length of this junction is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends feature a fillet to facilitate the connection of the two tubes.

Inline tube reducer ⌀35 mm to ⌀18 mm in STL 3D format. Final length of this fitting is 26 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 8 mm. The ends are rounded on the inside to ease the connection.

Straight tube adapter ⌀35 mm to ⌀15 mm in STL 3D format. Length of this coupler is 55 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 5 mm, the smaller one of 30 mm. The ends are rounded on the inside.

Tube adapter ⌀35 mm to ⌀15 mm in STL 3D format. Total length of this adapter is 55 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 15 mm. The ends are raw.

Tube coupler ⌀35 mm to ⌀19 mm in STL format. Length of this sleeve is 60 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 15 mm. The ends are raw.

Tube fitting ⌀35 mm to ⌀31 mm in STL 3D format. Total length of this sleeve is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 30 mm. The ends are not rounded.

Straight tube reducer ⌀35 mm to ⌀34 mm in STL 3D format. Total length of this fitting is 55 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 20 mm. The ends are not rounded.

Inline tube reducer ⌀35 mm to ⌀34 mm in STL format. Length of this connector is 50 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 25 mm, the smaller one of 20 mm. The ends are raw.

Inline fitting ⌀35 mm to ⌀34 mm in STL format. Final length of this junction is 45 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 20 mm, the smaller one of 20 mm as well. The ends are not rounded.

Inline tube adapter ⌀35 mm to ⌀15 mm in STL 3D format. Total length of this junction is 320 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The ends are raw.

Tube connector ⌀36 mm to ⌀19 mm in STL 3D format. Length of this adapter is 26 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 8 mm. The ends are rounded on the inside to facilitate the connection of the two tubes.

Tube junction ⌀36 mm to ⌀14 mm in STL 3D format. Final length of this adapter is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 10 mm, the smaller one of 10 mm as well. The two axes of the tubes are off-center by 8 mm. The ends are not rounded.