Washer, Flat gasket, Ring 3D Files - Inner diameter 0.1 to 30 mm | page 5
Model(s) 121 to 150 of 197
Washer / Flat Gasket STL 3D file ⌀ID: 12 mm ⌀OD: 15.5 mm thickness: 1.8 mm (📦 #10686)
1 object(s) - format STL
Download this file of washer / gasket in STL file format. This part features an internal diameter of ⌀12 mm and an external diameter of ⌀15.5 mm. The total thickness is 1.8 mm. There is no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 12 | mm |
| outer diameter | 15.5 | mm |
| thickness | 1.8 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 12 mm ⌀OD: 14 mm thickness: 20 mm (📦 #10933)
1 object(s) - format STL
Model of washer / flat gasket in STL file format. This model features an internal diameter of ⌀12 mm and an external diameter of ⌀14 mm. The total thickness is 20 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 12 | mm |
| outer diameter | 14 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 13 mm ⌀OD: 16 mm thickness: 2 mm (📦 #7452)
1 object(s) - format STL
Download this model of washer / flat gasket in STL file format. This model features an internal diameter of ⌀13 mm and an external diameter of ⌀16 mm. The total thickness is 2 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 13 | mm |
| outer diameter | 16 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 13.0 mm ⌀OD: 14.5 mm thickness: 20 mm (📦 #10936)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL file format. This part features an internal diameter of ⌀13.0 mm and an external diameter of ⌀14.5 mm. The part thickness is 20 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 13.0 | mm |
| outer diameter | 14.5 | mm |
| thickness | 20 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 13.2 mm ⌀OD: 19.5 mm thickness: 2 mm (📦 #7537)
1 object(s) - format STL
Download this 3D file of gasket / washer in STL file format. This model features an inner diameter of ⌀13.2 mm and an outer diameter of ⌀19.5 mm. The thickness is 2 mm. No finish is present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 13.2 | mm |
| outer diameter | 19.5 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 14 mm ⌀OD: 18 mm thickness: 3 mm (📦 #6556)
1 object(s) - format STL
Model of washer / gasket in STL 3D file format. This part features an inner diameter of ⌀14 mm and an outer diameter of ⌀18 mm. The part thickness is 3 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 14 | mm |
| outer diameter | 18 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 14.7 mm ⌀OD: 40 mm thickness: 10 mm + chamfer (📦 #10741)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This model has an inner diameter of ⌀14.7 mm and an outer diameter of ⌀40 mm. The thickness is 10 mm. A chamfer is present on the outer diameter with a value of 2 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 14.7 | mm |
| outer diameter | 40 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | outer | |
| sides | one side | |
| finish value | 2 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 15 mm ⌀OD: 20 mm thickness: 2.5 mm + chamfer (📦 #3635)
1 object(s) - format STL
Download this model of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀15 mm and an outer diameter of ⌀20 mm. The total thickness is 2.5 mm. A chamfer is applied on the inner diameter with a value of 00.4 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 20 | mm |
| thickness | 2.5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.4 | mm |
Washer / Flat Gasket STL file ⌀ID: 15 mm ⌀OD: 75 mm thickness: 4 mm + chamfers (📦 #3900)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This model features an inner diameter of ⌀15 mm and an outer diameter of ⌀75 mm. The part thickness is 4 mm. Chamfers are applied on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 75 | mm |
| thickness | 4 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 15.0 mm ⌀OD: 21.0 mm thickness: 1.2 mm (📦 #5457)
1 object(s) - format STL
Download this 3D model of gasket / washer in STL format. This model features an inner diameter of ⌀15.0 mm and an outer diameter of ⌀21.0 mm. The total thickness is 1.2 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15.0 | mm |
| outer diameter | 21.0 | mm |
| thickness | 1.2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 15.0 mm ⌀OD: 20.0 mm thickness: 1.5 mm (📦 #5459)
1 object(s) - format STL
3D model of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀15.0 mm and an outer diameter of ⌀20.0 mm. The total thickness is 1.5 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15.0 | mm |
| outer diameter | 20.0 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 15 mm ⌀OD: 19 mm thickness: 16 mm (📦 #6826)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL 3D file format. This part has an inner diameter of ⌀15 mm and an outer diameter of ⌀19 mm. The total thickness is 16 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 19 | mm |
| thickness | 16 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 15 mm ⌀OD: 18 mm thickness: 3 mm (📦 #7576)
1 object(s) - format STL
Model of flat gasket / washer in STL format. This model features an inner diameter of ⌀15 mm and an outer diameter of ⌀18 mm. The thickness is 3 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 18 | mm |
| thickness | 3 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 15 mm ⌀OD: 21 mm thickness: 4.1 mm (📦 #9165)
1 object(s) - format STL
Download this model of gasket / washer in STL file format. This part has an inner diameter of ⌀15 mm and an outer diameter of ⌀21 mm. The thickness is 4.1 mm. There is no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 21 | mm |
| thickness | 4.1 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 15 mm ⌀OD: 21 mm thickness: 4.1 mm + fillets (📦 #10547)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀15 mm and an outer diameter of ⌀21 mm. The total thickness is 4.1 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15 | mm |
| outer diameter | 21 | mm |
| thickness | 4.1 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 15.5 mm ⌀OD: 22 mm thickness: 5 mm (📦 #4333)
1 object(s) - format STL
3D file of washer / gasket in STL 3D file format. This part features an internal diameter of ⌀15.5 mm and an external diameter of ⌀22 mm. The part thickness is 5 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15.5 | mm |
| outer diameter | 22 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 15.5 mm ⌀OD: 23 mm thickness: 5 mm (📦 #4339)
1 object(s) - format STL
Download this model of washer / gasket in STL format. This part has an internal diameter of ⌀15.5 mm and an external diameter of ⌀23 mm. The total thickness is 5 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 15.5 | mm |
| outer diameter | 23 | mm |
| thickness | 5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16 mm ⌀OD: 24 mm thickness: 3 mm + chamfers (📦 #1695)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The total thickness is 3 mm. Chamfers are present on both the inner diameter and the outer diameter, each with a value of 0.5 mm. These finishes are present on both sides.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 24 | mm |
| thickness | 3 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.5 | mm |
Washer / Flat Gasket STL file ⌀ID: 16 mm ⌀OD: 24 mm thickness: 1.5 mm (📦 #5187)
1 object(s) - format STL
Download this 3D file of flat gasket / washer in STL file format. This model has an inner diameter of ⌀16 mm and an outer diameter of ⌀24 mm. The part thickness is 1.5 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 24 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16 mm ⌀OD: 25 mm thickness: 2 mm (📦 #5199)
1 object(s) - format STL
3D file of washer / flat gasket in STL file format. This part has an inner diameter of ⌀16 mm and an outer diameter of ⌀25 mm. The thickness is 2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 25 | mm |
| thickness | 2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 16 mm ⌀OD: 20 mm thickness: 2 mm + chamfer (📦 #8440)
1 object(s) - format STL
Download this file of flat gasket / washer in STL format. This model features an internal diameter of ⌀16 mm and an external diameter of ⌀20 mm. The part thickness is 2 mm. A chamfer is applied on the internal diameter with a value of 1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16 | mm |
| outer diameter | 20 | mm |
| thickness | 2 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 1 | mm |
Washer / Flat Gasket STL 3D file ⌀ID: 16.4 mm ⌀OD: 19.8 mm thickness: 1.5 mm (📦 #5113)
1 object(s) - format STL
Download this 3D file of washer / flat gasket in STL file format. This part features an inner diameter of ⌀16.4 mm and an outer diameter of ⌀19.8 mm. The thickness is 1.5 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.4 | mm |
| outer diameter | 19.8 | mm |
| thickness | 1.5 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 2.0 mm (📦 #2329)
1 object(s) - format STL
3D model of gasket / washer in STL 3D file format. This model has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The part thickness is 2.0 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 2.0 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.5 mm (📦 #2341)
1 object(s) - format STL
File of washer / gasket in STL format. This part has an inner diameter of ⌀16.5 mm and an outer diameter of ⌀25.0 mm. The total thickness is 3.5 mm. This part has no finish present.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.5 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16.5 mm ⌀OD: 25.0 mm thickness: 3.2 mm (📦 #2342)
1 object(s) - format STL
Model of gasket / washer in STL file format. This part has an internal diameter of ⌀16.5 mm and an external diameter of ⌀25.0 mm. The total thickness is 3.2 mm. No finish is applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 25.0 | mm |
| thickness | 3.2 | mm |
| finish | none |
Washer / Flat Gasket STL file ⌀ID: 16.5 mm ⌀OD: 22 mm thickness: 5 mm + chamfer (📦 #4319)
1 object(s) - format STL
Download this file of flat gasket / washer in STL 3D file format. This model features an inner diameter of ⌀16.5 mm and an outer diameter of ⌀22 mm. The part thickness is 5 mm. A chamfer is present on the inner diameter with a value of 0.1 mm.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 16.5 | mm |
| outer diameter | 22 | mm |
| thickness | 5 | mm |
| finish | chamfer | |
| finish position | inner | |
| sides | one side | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 18 mm ⌀OD: 24 mm thickness: 10 mm + chamfers (📦 #1704)
1 object(s) - format STL (5.0/5) 1 vote(s)
3D model of washer / gasket in STL format. This model has an internal diameter of ⌀18 mm and an external diameter of ⌀24 mm. The total thickness is 10 mm. Chamfers are present on both the internal diameter and the external diameter, each with a value of 0.3 mm. These finishes are present on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 24 | mm |
| thickness | 10 | mm |
| finish | chamfer | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.3 | mm |
Washer / Flat Gasket STL file ⌀ID: 18 mm ⌀OD: 20 mm thickness: 1.2 mm (📦 #1714)
1 object(s) - format STL
Model of gasket / washer in STL 3D file format. This part has an inner diameter of ⌀18 mm and an outer diameter of ⌀20 mm. The thickness is 1.2 mm. This part has no finish applied.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 20 | mm |
| thickness | 1.2 | mm |
| finish | none |
Washer / Flat Gasket STL 3D file ⌀ID: 18 mm ⌀OD: 22 mm thickness: 0.4 mm + fillets (📦 #1738)
1 object(s) - format STL
Download this 3D model of flat gasket / washer in STL 3D file format. This part features an inner diameter of ⌀18 mm and an outer diameter of ⌀22 mm. The part thickness is 0.4 mm. Fillets are present on both the inner diameter and the outer diameter, each with a value of 0.1 mm. These finishes are applied on the top and bottom.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18 | mm |
| outer diameter | 22 | mm |
| thickness | 0.4 | mm |
| finish | fillet | |
| finish position | inner + oute... | |
| sides | two sides | |
| finish value | 0.1 | mm |
Washer / Flat Gasket STL file ⌀ID: 18.6 mm ⌀OD: 30 mm thickness: 4 mm (📦 #8475)
1 object(s) - format STL
Model of washer / flat gasket in STL format. This model has an internal diameter of ⌀18.6 mm and an external diameter of ⌀30 mm. The part thickness is 4 mm. No finish is available.
| Parameter | Value | Unit |
|---|---|---|
| inner diameter | 18.6 | mm |
| outer diameter | 30 | mm |
| thickness | 4 | mm |
| finish | none |
Can't find the right model?
Create it with your specs