Inline tube adapter 3D Files - Side A outer diameter 5 to 100 mm | page 10

Inline tubing adapter ⌀40 mm to ⌀39 mm in STL 3D format. Total length of this reducer is 45 mm. The larger-diameter tube has a thickness of 2 mm and a sleeve length of 20 mm. The smaller-diameter tube has a thickness of 2.3 mm and a length of 20 mm as well. The ends are raw.

Inline tube reducer ⌀40 mm to ⌀24 mm in STL format. Length of this adapter is 75 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 25 mm. The ends have no fillet.

Tube connector ⌀40 mm to ⌀16 mm in STL format. Length of this sleeve is 36 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 12 mm, the smaller one of 12 mm as well. The axes of the tubes are off-center by 2 mm. The ends are not rounded.

Straight tube coupler ⌀40 mm to ⌀14 mm in STL format. Final length of this fitting is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 30 mm. The two axes of the tubes are offset by 12.9 mm. The ends have no fillet.

Tube fitting ⌀41 mm to ⌀33 mm in STL 3D format. Total length of this connector is 100 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 40 mm as well. The ends have a fillet on the inside.

Straight tube fitting ⌀41 mm to ⌀5 mm in STL 3D format. Length of this sleeve is 75 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 15 mm, the smaller one of 10 mm. The ends are raw.

Tubing reducer ⌀42 mm to ⌀14 mm in STL format. Total length of this reducer is 35 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 10 mm, the smaller one of 10 mm as well. The axes of the tubes are offset by 8 mm. The ends are not rounded.

Straight tube coupler ⌀42 mm to ⌀40 mm in STL 3D format. Total length of this coupler is 95 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 50 mm. The ends have a fillet on the outside.

Tube connector ⌀42 mm to ⌀30 mm in STL format. Final length of this reducer is 90 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 25 mm, the smaller one of 35 mm. The ends are not rounded.

Diameter adapter ⌀42 mm to ⌀35 mm in STL format. Total length of this junction is 27 mm. The larger-diameter tube has a thickness of 2.1 mm and a length of 12 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 10 mm. The ends have no fillet.

Tube fitting ⌀42 mm to ⌀41 mm in STL 3D format. Total length of this coupler is 45 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 20 mm, the smaller one of 20 mm as well. The ends are raw.

Inline sleeve ⌀42 mm to ⌀41 mm in STL 3D format. Total length of this reducer is 65 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube junction ⌀42 mm to ⌀37 mm in STL 3D format. Total length of this connector is 70 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Tube reducer ⌀42 mm to ⌀29 mm in STL 3D format. Total length of this sleeve is 140 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a length of 60 mm, the smaller one of 40 mm. The ends are rounded to make tube connection easier.

Diameter adapter ⌀42 mm to ⌀29 mm in STL 3D format. Total length of this junction is 85 mm. The thickness of the tubes is identical: 5 mm. The larger-diameter tube has a sleeve length of 35 mm, the smaller one of 30 mm. The ends have no fillet.

Tube reducer ⌀42 mm to ⌀21 mm in STL 3D format. Length of this junction is 60 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 20 mm. The ends are rounded to ease the connection.

Tube adapter ⌀43 mm to ⌀31 mm in STL format. Final length of this coupler is 120 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends are not rounded.

Inline tubing adapter ⌀43 mm to ⌀10 mm in STL 3D format. Total length of this reducer is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends have no fillet.

Straight tube coupler ⌀43 mm to ⌀33 mm in STL format. Total length of this reducer is 88 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 29 mm. The ends feature an internal fillet to facilitate the connection of the two tubes.

Inline tubing adapter ⌀43 mm to ⌀41 mm in STL format. Total length of this sleeve is 105 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends have a fillet on the outside to ease the connection.

Inline sleeve ⌀43 mm to ⌀42 mm in STL 3D format. Length of this junction is 105 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a length of 50 mm, the smaller one of 50 mm as well. The ends feature an external fillet to ease the connection.

Straight tube adapter ⌀43 mm to ⌀35 mm in STL format. Length of this connector is 35 mm. The larger-diameter tube has a thickness of 2.8 mm and a length of 15 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 15 mm as well. The ends are raw.

Inline fitting ⌀44 mm to ⌀16 mm in STL format. Final length of this sleeve is 90 mm. The larger-diameter tube has a thickness of 2.5 mm and a sleeve length of 30 mm. The smaller-diameter tube has a thickness of 2 mm and a length of 30 mm as well. The ends are raw.

Straight tube adapter ⌀44 mm to ⌀24 mm in STL format. Length of this junction is 90 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 40 mm. The ends have no fillet.

Inline tube coupler ⌀44 mm to ⌀24 mm in STL 3D format. Total length of this fitting is 110 mm. The thickness of the tubes is identical: 2.1 mm. The larger-diameter tube has a length of 40 mm, the smaller one of 40 mm as well. The ends are not rounded.

Straight tube adapter ⌀44 mm to ⌀36 mm in STL format. Length of this fitting is 80 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a length of 30 mm, the smaller one of 30 mm as well. The ends are raw.

Inline sleeve ⌀44 mm to ⌀35 mm in STL 3D format. Length of this sleeve is 88 mm. The thickness of the tubes is identical: 3 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 29 mm. The ends have a fillet on the inside.

Tube junction ⌀44 mm to ⌀42 mm in STL format. Final length of this coupler is 105 mm. The thickness of the tubes is identical: 4 mm. The larger-diameter tube has a sleeve length of 50 mm, the smaller one of 50 mm as well. The ends have a fillet on the outside to facilitate the connection of the two tubes.

Tube coupler ⌀44 mm to ⌀38 mm in STL 3D format. Length of this coupler is 180 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 40 mm, the smaller one of 120 mm. The two axes of the tubes are off-center by 2.9 mm. The ends are raw.

Straight tube reducer ⌀44 mm to ⌀42 mm in STL format. Total length of this reducer is 70 mm. The thickness of the tubes is identical: 2 mm. The larger-diameter tube has a sleeve length of 30 mm, the smaller one of 30 mm as well. The ends are rounded.