?>

Round air vent grill 3D Files - Male diameter 50 to 100 mm | page 1

Model(s) 1 to 30 of 56
Model of a round vent cover for ventilation in STL format. Its male diameter measures 50 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. A central reinforcement reinforces the slats. This 3D aeration grille features a thin flange of 5 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 60 °
slat thickness 2.4 mm
flange width 5 mm
central reinforcement yes
Model of a round grille for air circulation in STL format. Its insertion diameter is 50 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This 3D vent grille features a thin flange of 5 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no
3D design of a round air vent for air circulation in STL format. Its male diameter measures 50 mm. The slats have an angle of 45° and a high thickness of 1.8 mm. A vertical reinforcement secures the whole structure. This 3D ventilation grille has a flange of 10 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 45 °
slat thickness 1.8 mm
flange width 10 mm
central reinforcement yes
Model of a round grille for air circulation in STL format. Its male diameter measures 50 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement reinforces the slats. This 3D ventilation grille features a collar of 10 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes
3D design of a round air vent for air circulation in STL format. Its male diameter is 50 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A central reinforcement reinforces the whole structure. This 3D vent grille features a flange of 10 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 30 °
slat thickness 2.4 mm
flange width 10 mm
central reinforcement yes
Design of a round vent cover for ventilation in STL format. Its male diameter is 50 mm. The slats have an angle of 35° and a low thickness of 1.4 mm. This 3D aeration grille features a thin flange of 1 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 35 °
slat thickness 1.4 mm
flange width 1 mm
central reinforcement no
3D file of a round grille for air circulation in STL format. Its insertion diameter measures 55 mm. The slats have a slight angle of 30° and a low thickness of 1.6 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille has a prominent flange of 20 mm.
Parameter Value Unit
male diameter 55 mm
slat angle 30 °
slat thickness 1.6 mm
flange width 20 mm
central reinforcement yes
3D model of a round vent cover for ventilation in STL format. Its male diameter measures 60 mm. The slats have an angle of 45° and a low thickness of 1.5 mm. A centered vertical reinforcement strengthens the slats. This aeration grille features a prominent flange of 15 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 45 °
slat thickness 1.5 mm
flange width 15 mm
central reinforcement yes
File of a round vent cover for ventilation in STL format. Its male diameter is 60 mm. The slats have a steep angle of 60° and a low thickness of 1.5 mm. A centered vertical reinforcement secures the whole structure. This ventilation grille has a prominent flange of 15 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 60 °
slat thickness 1.5 mm
flange width 15 mm
central reinforcement yes
3D design of a round vent cover for air circulation in STL format. Its insertion diameter measures 60 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement strengthens the slats. This 3D vent cover features a thin flange of 5 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 45 °
slat thickness 2 mm
flange width 5 mm
central reinforcement yes
Model of a round vent cover for air circulation in STL format. Its insertion diameter measures 60 mm. The slats have a steep angle of 60° and a low thickness of 1.5 mm. A vertical reinforcement reinforces the whole structure. This 3D aeration grille has a prominent flange of 20 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 60 °
slat thickness 1.5 mm
flange width 20 mm
central reinforcement yes
File of a round grille for air circulation in STL format. Its insertion diameter measures 60 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the slats. This vent cover has a collar of 10 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes
File of a round air vent for air circulation in STL format. Its insertion diameter is 65 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the slats. This ventilation grille features a collar of 8 mm.
Parameter Value Unit
male diameter 65 mm
slat angle 45 °
slat thickness 2 mm
flange width 8 mm
central reinforcement yes
3D model of a round vent cover for air circulation in STL format. Its male diameter measures 67.7 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This 3D ventilation grille has a thin flange of 5 mm.
Parameter Value Unit
male diameter 67.7 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement no
3D file of a round air vent for ventilation in STL format. Its insertion diameter is 70 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement reinforces the slats. This 3D vent grille features a thin flange of 5 mm.
Parameter Value Unit
male diameter 70 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes
3D file of a round air vent for air circulation in STL format. Its insertion diameter is 70 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent cover has a thin flange of 5 mm.
Parameter Value Unit
male diameter 70 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no
3D design of a round vent cover for air circulation in STL format. Its male diameter measures 71 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A centered vertical reinforcement reinforces the slats. This vent grille has a prominent flange of 20 mm.
Parameter Value Unit
male diameter 71 mm
slat angle 45 °
slat thickness 2.4 mm
flange width 20 mm
central reinforcement yes
File of a round vent cover for air circulation in STL format. Its male diameter is 71 mm. The slats have an angle of 40° and a high thickness of 2.4 mm. A central reinforcement strengthens the slats. This 3D vent grille has a thin flange of 4 mm.
Parameter Value Unit
male diameter 71 mm
slat angle 40 °
slat thickness 2.4 mm
flange width 4 mm
central reinforcement yes
3D model of a round air vent for air circulation in STL format. Its male diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement secures the slats. This 3D ventilation grille features a thin flange of 5 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement yes
File of a round vent cover for ventilation in STL format. Its insertion diameter is 71.2 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. A centered vertical reinforcement strengthens the whole structure. This 3D vent grille has a collar of 10 mm.
Parameter Value Unit
male diameter 71.2 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 10 mm
central reinforcement yes
3D file of a round grille for air circulation in STL format. Its insertion diameter measures 71.5 mm. The slats have an angle of 40° and a low thickness of 1.4 mm. This vent cover features a thin flange of 5 mm.
Parameter Value Unit
male diameter 71.5 mm
slat angle 40 °
slat thickness 1.4 mm
flange width 5 mm
central reinforcement no
3D model of a round vent cover for air circulation in STL format. Its insertion diameter measures 80 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This aeration grille features a thin flange of 5 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no
3D file of a round air vent for ventilation in STL format. Its male diameter measures 80 mm. The slats have a slight angle of 30° and a high thickness of 2.2 mm. A vertical reinforcement strengthens the slats. This vent cover has a collar of 8 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 30 °
slat thickness 2.2 mm
flange width 8 mm
central reinforcement yes
3D file of a round air vent for ventilation in STL format. Its insertion diameter is 80 mm. The slats have a steep angle of 60° and a high thickness of 2.4 mm. A centered vertical reinforcement secures the slats. This 3D vent cover has a flange of 10 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 60 °
slat thickness 2.4 mm
flange width 10 mm
central reinforcement yes
3D file of a round vent cover for ventilation in STL format. Its insertion diameter measures 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This aeration grille features a prominent flange of 20 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 2 mm
flange width 20 mm
central reinforcement yes
3D file of a round air vent for ventilation in STL format. Its male diameter is 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement secures the slats. This 3D vent cover features a collar of 8 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 2 mm
flange width 8 mm
central reinforcement yes
3D model of a round air vent for ventilation in STL format. Its insertion diameter measures 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. This 3D vent grille features a flange of 10 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement no
Model of a round vent cover for air circulation in STL format. Its insertion diameter is 85 mm. The slats have an angle of 45° and a low thickness of 1.6 mm. This vent grille has a thin flange of 5 mm.
Parameter Value Unit
male diameter 85 mm
slat angle 45 °
slat thickness 1.6 mm
flange width 5 mm
central reinforcement no
Design of a round vent cover for ventilation in STL format. Its insertion diameter measures 85 mm. The slats have an angle of 35° and a high thickness of 1.8 mm. This 3D aeration grille features a thin flange of 5 mm.
Parameter Value Unit
male diameter 85 mm
slat angle 35 °
slat thickness 1.8 mm
flange width 5 mm
central reinforcement no
Model of a round vent cover for air circulation in STL format. Its male diameter measures 85 mm. The slats have an angle of 35° and a low thickness of 1.6 mm. This 3D aeration grille has a thin flange of 4 mm.
Parameter Value Unit
male diameter 85 mm
slat angle 35 °
slat thickness 1.6 mm
flange width 4 mm
central reinforcement no
Can't find the right model? Create it with your parameters