?>

Round air vent STL file ∅ 50 mm, slat angle: 30° with central reinforcement 📦#1647

STL Download STL
Create a new model:
from scratch search for a model
3D file of a round vent cover for air circulation in STL format. Its insertion diameter measures 50 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A vertical reinforcement secures the whole structure. This vent cover has a collar of 10 mm. The full diameter of the model is 70 mm.
Generation date: 2025-09-08
3D Model Round air vent STL file ∅ 50 mm, slat angle: 30° with central reinforcement

3D model download

Free
  • round-air-vent-dia50mm-slD30d-_model1647-nb0_dd{id}.stl : 3.6 Mo
STL Mesh quality : Linear deflection 0.1 Angular deflection 0.1
No compliance warranty No compliance warranty
(attribution - non commercial use - no derivatives)
Safe download

Values for this model

This model was generated by the Round air vent grill template, with the following values:
Parameter Value
#1 male diameter 50 mm
#2 slat angle 30 °
#3 slat thickness 2.4 mm
#4 flange width 10 mm
#5 central reinforcement yes
Metadata Value
Total diameter (including flange) 70 mm
Total thickness 25 mm
illustration of the parameters
Representation of the parameters

  • The total thickness of the vent is 25 mm.
  • Whatever the parameters, the slats never overlap. This ensures an optimal airflow. At the same time, the slats form an almost opaque screen along the axis.
  • The slats are actually shaped as parallelograms rather than rectangles. This ensures better printability.
  • The slats and the central reinforcement (if present) feature a 0.40 mm fillet on all edges. This improves airflow and prevents potential whistling.
  • The collar, if present, is 3 mm thick and has a 2 mm fillet for aesthetic purposes.
  • The male insertion area is 3 mm thick and has a 1 mm fillet on both edges to facilitate insertion into the intended slot.
  • The central reinforcement, if present, is 2 mm thick and spans the entire projected width of the slats.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 male diameter dia
#2 slat angle slD
#3 slat thickness slT
#4 flange width flW
#5 central reinforcement renf

Related 3D models

To search for a model based on your own parameters, go to the template page Round air vent grill 

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2063)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter is 92 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A central reinforcement secures the slats. This 3D vent grille has a flange of 10 mm. The overall diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 2.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1492)

1 object(s) - format STL
Round air vent STL file ∅ 90 mm, slat angle: 35° with central reinforcement
Design of a round grille for air circulation in STL format. Its insertion diameter measures 90 mm. The slats have an angle of 35° and a high thickness of 2.4 mm. A central reinforcement reinforces the whole structure. This aeration grille has a collar of 10 mm. The total diameter of the model is 110 mm.
Parameter Value Unit
male diameter 90 mm
slat angle 35 °
slat thickness 2.4 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 80 mm, slat angle: 30° with central reinforcement (📦 #1562)

1 object(s) - format STL
Round air vent STL 3D file ∅ 80 mm, slat angle: 30° with central reinforcement
Design of a round air vent for ventilation in STL format. Its insertion diameter is 80 mm. The slats have a slight angle of 30° and a high thickness of 2.2 mm. A centered vertical reinforcement strengthens the whole structure. This vent cover features a collar of 8 mm. The total diameter of this model is 96 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 30 °
slat thickness 2.2 mm
flange width 8 mm
central reinforcement yes

Round air vent STL file ∅ 60 mm, slat angle: 30° with central reinforcement (📦 #2169)

1 object(s) - format STL
Round air vent STL file ∅ 60 mm, slat angle: 30° with central reinforcement
3D design of a round grille for ventilation in STL format. Its insertion diameter measures 60 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This 3D vent cover features a flange of 10 mm. The overall diameter of this model is 80 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 71 mm, slat angle: 40° with central reinforcement (📦 #2054)

1 object(s) - format STL
Round air vent STL 3D file ∅ 71 mm, slat angle: 40° with central reinforcement
Model of a round air vent for ventilation in STL format. Its insertion diameter measures 71 mm. The slats have an angle of 40° and a high thickness of 2.4 mm. A centered vertical reinforcement reinforces the slats. This 3D aeration grille has a thin flange of 4 mm. The full diameter of the model is 79 mm.
Parameter Value Unit
male diameter 71 mm
slat angle 40 °
slat thickness 2.4 mm
flange width 4 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement (📦 #2140)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 30° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter is 92 mm. The slats have a slight angle of 30° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This 3D vent cover has a flange of 10 mm. The total diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 30 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 92 mm, slat angle: 25° with central reinforcement (📦 #2304)

1 object(s) - format STL
Round air vent STL 3D file ∅ 92 mm, slat angle: 25° with central reinforcement
Design of a round air vent for ventilation in STL format. Its male diameter is 92 mm. The slats have a slight angle of 25° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This 3D vent grille has a flange of 10 mm. The full diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 25 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement (📦 #1558)

1 object(s) - format STL
Round air vent STL 3D file ∅ 90 mm, slat angle: 35° with central reinforcement
Design of a round grille for air circulation in STL format. Its insertion diameter is 90 mm. The slats have an angle of 35° and a high thickness of 2.4 mm. A centered vertical reinforcement strengthens the whole structure. This aeration grille features a prominent flange of 18 mm. The total diameter of the model is 126 mm.
Parameter Value Unit
male diameter 90 mm
slat angle 35 °
slat thickness 2.4 mm
flange width 18 mm
central reinforcement yes

Round air vent STL 3D file ∅ 91.9 mm, slat angle: 20° with central reinforcement (📦 #2298)

1 object(s) - format STL
Round air vent STL 3D file ∅ 91.9 mm, slat angle: 20° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter measures 91.9 mm. The slats have a slight angle of 20° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the slats. This 3D vent grille features a flange of 10 mm. The total diameter of the model is 111.9 mm.
Parameter Value Unit
male diameter 91.9 mm
slat angle 20 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 40° with central reinforcement (📦 #2307)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 40° with central reinforcement
Design of a round vent cover for air circulation in STL format. Its insertion diameter measures 92 mm. The slats have an angle of 40° and a high thickness of 2 mm. A central reinforcement secures the whole structure. This 3D ventilation grille has a collar of 10 mm. The full diameter of this model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 40 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 54 mm, slat angle: 45° with central reinforcement (📦 #2877)

1 object(s) - format STL
Round air vent STL file ∅ 54 mm, slat angle: 45° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter measures 54 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement reinforces the slats. This ventilation grille features a flange of 10 mm. The total diameter of the model is 74 mm.
Parameter Value Unit
male diameter 54 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 98.5 mm, slat angle: 40° with central reinforcement (📦 #1956)

1 object(s) - format STL
Round air vent STL file ∅ 98.5 mm, slat angle: 40° with central reinforcement
3D design of a round vent cover for air circulation in STL format. Its insertion diameter measures 98.5 mm. The slats have an angle of 40° and a high thickness of 2 mm. A central reinforcement reinforces the whole structure. This 3D aeration grille features a flange of 10 mm. The full diameter of the model is 118.5 mm.
Parameter Value Unit
male diameter 98.5 mm
slat angle 40 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 65 mm, slat angle: 45° with central reinforcement (📦 #1898)

1 object(s) - format STL
Round air vent STL file ∅ 65 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for air circulation in STL format. Its insertion diameter is 65 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement strengthens the slats. This vent cover has a collar of 8 mm. The overall diameter of the model is 81 mm.
Parameter Value Unit
male diameter 65 mm
slat angle 45 °
slat thickness 2 mm
flange width 8 mm
central reinforcement yes

Round air vent STL file ∅ 80 mm, slat angle: 45° with central reinforcement (📦 #2385)

1 object(s) - format STL
Round air vent STL file ∅ 80 mm, slat angle: 45° with central reinforcement
File of a round grille for ventilation in STL format. Its male diameter measures 80 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the whole structure. This vent grille has a flange of 8 mm. The total diameter of the model is 96 mm.
Parameter Value Unit
male diameter 80 mm
slat angle 45 °
slat thickness 2 mm
flange width 8 mm
central reinforcement yes

Round air vent STL 3D file ∅ 55 mm, slat angle: 45° with central reinforcement (📦 #2898)

1 object(s) - format STL
Round air vent STL 3D file ∅ 55 mm, slat angle: 45° with central reinforcement
3D design of a round grille for air circulation in STL format. Its male diameter measures 55 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement strengthens the whole structure. This ventilation grille features a prominent flange of 15 mm. The overall diameter of the model is 85 mm.
Parameter Value Unit
male diameter 55 mm
slat angle 45 °
slat thickness 2 mm
flange width 15 mm
central reinforcement yes

Round air vent STL file ∅ 60 mm, slat angle: 45° with central reinforcement (📦 #1499)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL file ∅ 60 mm, slat angle: 45° with central reinforcement
Model of a round grille for ventilation in STL format. Its insertion diameter is 60 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the whole structure. This 3D vent cover has a thin flange of 5 mm. The full diameter of this model is 70 mm.
Parameter Value Unit
male diameter 60 mm
slat angle 45 °
slat thickness 2 mm
flange width 5 mm
central reinforcement yes

Round air vent STL file ∅ 95 mm, slat angle: 45° with central reinforcement (📦 #1890)

1 object(s) - format STL
Round air vent STL file ∅ 95 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for ventilation in STL format. Its insertion diameter is 95 mm. The slats have an angle of 45° and a high thickness of 2 mm. A centered vertical reinforcement secures the slats. This vent grille features a collar of 8 mm. The total diameter of the model is 111 mm.
Parameter Value Unit
male diameter 95 mm
slat angle 45 °
slat thickness 2 mm
flange width 8 mm
central reinforcement yes

Round air vent STL file ∅ 100 mm, slat angle: 45° with central reinforcement (📦 #1955)

1 object(s) - format STL
Round air vent STL file ∅ 100 mm, slat angle: 45° with central reinforcement
Design of a round air vent for air circulation in STL format. Its insertion diameter measures 100 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement secures the whole structure. This vent cover has a collar of 10 mm. The overall diameter of this model is 120 mm.
Parameter Value Unit
male diameter 100 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 50 mm, slat angle: 10° with central reinforcement (📦 #1577)

1 object(s) - format STL (5.0/5) 1 vote(s)
Round air vent STL 3D file ∅ 50 mm, slat angle: 10° with central reinforcement
Model of a round vent cover for ventilation in STL format. Its male diameter measures 50 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A central reinforcement secures the slats. This aeration grille has a flange of 10 mm. The total diameter of the model is 70 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 77.5 mm, slat angle: 10° with central reinforcement (📦 #2529)

1 object(s) - format STL
Round air vent STL file ∅ 77.5 mm, slat angle: 10° with central reinforcement
Model of a round air vent for ventilation in STL format. Its insertion diameter is 77.5 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement strengthens the whole structure. This ventilation grille features a collar of 10 mm. The overall diameter of the model is 97.5 mm.
Parameter Value Unit
male diameter 77.5 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 71 mm, slat angle: 45° with central reinforcement (📦 #2053)

1 object(s) - format STL
Round air vent STL file ∅ 71 mm, slat angle: 45° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter measures 71 mm. The slats have an angle of 45° and a high thickness of 2.4 mm. A central reinforcement strengthens the slats. This ventilation grille has a prominent flange of 20 mm. The overall diameter of this model is 111 mm.
Parameter Value Unit
male diameter 71 mm
slat angle 45 °
slat thickness 2.4 mm
flange width 20 mm
central reinforcement yes

Round air vent STL 3D file ∅ 115 mm, slat angle: 45° with central reinforcement (📦 #2398)

1 object(s) - format STL
Round air vent STL 3D file ∅ 115 mm, slat angle: 45° with central reinforcement
File of a round air vent for air circulation in STL format. Its insertion diameter measures 115 mm. The slats have an angle of 45° and a high thickness of 2 mm. A central reinforcement secures the slats. This vent grille has a flange of 10 mm. The overall diameter of the model is 135 mm.
Parameter Value Unit
male diameter 115 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 91.9 mm, slat angle: 50° with central reinforcement (📦 #2297)

1 object(s) - format STL
Round air vent STL 3D file ∅ 91.9 mm, slat angle: 50° with central reinforcement
3D file of a round vent cover for ventilation in STL format. Its male diameter is 91.9 mm. The slats have a steep angle of 50° and a high thickness of 2 mm. A centered vertical reinforcement strengthens the slats. This aeration grille has a flange of 10 mm. The full diameter of the model is 111.9 mm.
Parameter Value Unit
male diameter 91.9 mm
slat angle 50 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 92 mm, slat angle: 10° with central reinforcement (📦 #2296)

1 object(s) - format STL
Round air vent STL file ∅ 92 mm, slat angle: 10° with central reinforcement
3D model of a round grille for air circulation in STL format. Its insertion diameter measures 92 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A centered vertical reinforcement secures the slats. This 3D ventilation grille features a collar of 10 mm. The full diameter of the model is 112 mm.
Parameter Value Unit
male diameter 92 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement (📦 #1441)

1 object(s) - format STL
Round air vent STL file ∅ 152 mm, slat angle: 30° with central reinforcement
3D file of a round air vent for ventilation in STL format. Its insertion diameter is 152 mm. The slats have a slight angle of 30° and a high thickness of 2.4 mm. A vertical reinforcement strengthens the whole structure. This vent cover features a thin flange of 5 mm. The overall diameter of this model is 162 mm.
Parameter Value Unit
male diameter 152 mm
slat angle 30 °
slat thickness 2.4 mm
flange width 5 mm
central reinforcement yes

Round air vent STL 3D file ∅ 96.5 mm, slat angle: 10° with central reinforcement (📦 #1916)

1 object(s) - format STL
Round air vent STL 3D file ∅ 96.5 mm, slat angle: 10° with central reinforcement
3D design of a round vent cover for ventilation in STL format. Its male diameter measures 96.5 mm. The slats have a slight angle of 10° and a high thickness of 2 mm. A vertical reinforcement reinforces the slats. This ventilation grille features a collar of 10 mm. The total diameter of this model is 116.5 mm.
Parameter Value Unit
male diameter 96.5 mm
slat angle 10 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes

Round air vent STL file ∅ 50 mm, slat angle: 45° with central reinforcement (📦 #1436)

1 object(s) - format STL
Round air vent STL file ∅ 50 mm, slat angle: 45° with central reinforcement
3D model of a round vent cover for ventilation in STL format. Its insertion diameter measures 50 mm. The slats have an angle of 45° and a high thickness of 1.8 mm. A vertical reinforcement secures the whole structure. This 3D ventilation grille features a collar of 10 mm. The full diameter of the model is 70 mm.
Parameter Value Unit
male diameter 50 mm
slat angle 45 °
slat thickness 1.8 mm
flange width 10 mm
central reinforcement yes

Round air vent STL 3D file ∅ 125 mm, slat angle: 45° with central reinforcement (📦 #1464)

1 object(s) - format STL
Round air vent STL 3D file ∅ 125 mm, slat angle: 45° with central reinforcement
Model of a round air vent for ventilation in STL format. Its insertion diameter measures 125 mm. The slats have an angle of 45° and a high thickness of 2 mm. A vertical reinforcement reinforces the slats. This 3D vent grille has a collar of 10 mm. The full diameter of the model is 145 mm.
Parameter Value Unit
male diameter 125 mm
slat angle 45 °
slat thickness 2 mm
flange width 10 mm
central reinforcement yes