Custom Tube elbow STL file 1° ⌀OD: 36 mm ⌀ID: 31 mm thickness: 2.5 mm 📦#5556

STL Download STL 1
Create a new model easy
from scratch search for a model
3D model of a pipe elbow with a 1° angle in STL format. This pipe elbow features an outer diameter of 36 mm and an inner diameter of 31 mm. This results in a tube thickness of 2.5 mm.
Generation date: 2025-12-30
3D Model Tube elbow STL file 1° ⌀OD: 36 mm ⌀ID: 31 mm thickness: 2.5 mm

3D model download

Free
  • pipe-elbow-ouD36mm-inD31mm-deg_model5556-nb0_dd{id}.stl : 147.7 Ko
STL Mesh quality : Linear deflection 0.001 Angular deflection 0.1
No compliance warranty No compliance warranty
(Internal and private use, non-commercial – no distribution – no derivatives)
Safe download
Instant .zip download — no email, no account

Values for this model

This model was generated by the Pipe elbow template, with the following values:
Parameter Value
#1 outer diameter 36 mm (≃1.42 in)
#2 inner diameter 31 mm (≃1.22 in)
#3 angle 1 °
#4 end fillets no
Metadata Value
Tube wall thickness 2.5 mm (≃0.10 in)
illustration of the parameters
Parameter overview

  • The length of the straight sections is equal to the outer diameter of the tube.
  • The arc radius is equal to the outer diameter of the tube.
  • If the end fillet option is enabled, the fillet radius applied to the inside and outside of the tube is equal to half the wall thickness minus 0.1 mm, never exceeding 3 mm.

Labels are used in the naming of the downloaded 3D files.

Parameter Label
#1 outer diameter ouD
#2 inner diameter inD
#3 angle deg
#4 end fillets fil

Related 3D models

To search for a model based on your own parameters, go to the template page Pipe elbow 

Tubing elbow STL file 1° ⌀OD: 36 mm ⌀ID: 32 mm thickness: 2 mm (📦 #4353)

1 object(s) - format STL
Tubing elbow STL file 1° ⌀OD: 36 mm ⌀ID: 32 mm thickness: 2 mm
3D model of a pipe elbow with a 1° angle in STL format. This elbow has an external diameter of 36 mm and an internal diameter of 32 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 36 mm
inner diameter 32 mm
angle 1 °
end fillets no

Pipe elbow STL file 1° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm (📦 #4352)

1 object(s) - format STL
Pipe elbow STL file 1° ⌀OD: 32 mm ⌀ID: 30 mm thickness: 1 mm
3D model of a tubing elbow with a 1° angle in STL format. This elbow features an external diameter of 32 mm and an internal diameter of 30 mm. This results in a tube thickness of 1 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 30 mm
angle 1 °
end fillets no

Tube elbow STL file 1° ⌀OD: 36.5 mm ⌀ID: 35 mm thickness: 0.75 mm (📦 #2878)

1 object(s) - format STL
Tube elbow STL file 1° ⌀OD: 36.5 mm ⌀ID: 35 mm thickness: 0.75 mm
File of an elbow with a 1° angle in STL format. This elbow has an external diameter of 36.5 mm and an internal diameter of 35 mm. The tube thickness is therefore 0.75 mm.
Parameter Value Unit
outer diameter 36.5 mm
inner diameter 35 mm
angle 1 °
end fillets no

Tube elbow STL file 1° ⌀OD: 32 mm ⌀ID: 29 mm thickness: 1.5 mm (📦 #5555)

1 object(s) - format STL
Tube elbow STL file 1° ⌀OD: 32 mm ⌀ID: 29 mm thickness: 1.5 mm
Model of an elbow with a 1° angle in STL format. This pipe elbow has an outer diameter of 32 mm and an inner diameter of 29 mm. This results in a tube thickness of 1.5 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 29 mm
angle 1 °
end fillets no

Tubing elbow STL 3D file 5° ⌀OD: 35 mm ⌀ID: 31 mm thickness: 2 mm (📦 #4611)

1 object(s) - format STL
Tubing elbow STL 3D file 5° ⌀OD: 35 mm ⌀ID: 31 mm thickness: 2 mm
3D file of a tubing elbow with a 5° angle in STL format. This pipe elbow features an external diameter of 35 mm and an internal diameter of 31 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 35 mm
inner diameter 31 mm
angle 5 °
end fillets no

Pipe elbow STL 3D file 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1434)

1 object(s) - format STL
Pipe elbow STL 3D file 1° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D file of an elbow with a 1° angle in STL format. This elbow features an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 1 °
end fillets no

Tubing elbow STL file 1° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm (📦 #3294)

1 object(s) - format STL
Tubing elbow STL file 1° ⌀OD: 30 mm ⌀ID: 24 mm thickness: 3 mm
File of an elbow with a 1° angle in STL format. This elbow has an external diameter of 30 mm and an internal diameter of 24 mm. The tube thickness is therefore 3 mm.
Parameter Value Unit
outer diameter 30 mm
inner diameter 24 mm
angle 1 °
end fillets no

Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1369)

1 object(s) - format STL (5.0/5) 1 vote(s)
Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
File of a pipe elbow with a 10° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 10 °
end fillets no

Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm (📦 #1740)

1 object(s) - format STL
Pipe elbow STL 3D file 10° ⌀OD: 40 mm ⌀ID: 34.8 mm thickness: 2.6 mm
3D file of a pipe elbow with a 10° angle in STL format. This elbow features an external diameter of 40 mm and an internal diameter of 34.8 mm. This results in a tube thickness of 2.6 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34.8 mm
angle 10 °
end fillets no

Tube elbow STL file 13° ⌀OD: 38 mm ⌀ID: 31.9 mm thickness: 3.05 mm (📦 #8825)

1 object(s) - format STL
Tube elbow STL file 13° ⌀OD: 38 mm ⌀ID: 31.9 mm thickness: 3.05 mm
Model of an elbow with a 13° angle in STL format. This elbow features an outer diameter of 38 mm and an inner diameter of 31.9 mm. This results in a tube thickness of 3.05 mm.
Parameter Value Unit
outer diameter 38 mm
inner diameter 31.9 mm
angle 13 °
end fillets no

Pipe elbow STL 3D file 15° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm (📦 #1880)

1 object(s) - format STL
Pipe elbow STL 3D file 15° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
3D model of a pipe elbow with a 15° angle in STL format. This pipe elbow has an external diameter of 38.5 mm and an internal diameter of 30.5 mm. This results in a tube thickness of 4 mm.
Parameter Value Unit
outer diameter 38.5 mm
inner diameter 30.5 mm
angle 15 °
end fillets no

Tube elbow STL file 15° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #7690)

1 object(s) - format STL
Tube elbow STL file 15° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D file of a pipe elbow with a 15° angle in STL format. This elbow has an outer diameter of 40 mm and an inner diameter of 34 mm. This results in a tube thickness of 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 15 °
end fillets no

Pipe elbow STL 3D file 15° ⌀OD: 33 mm ⌀ID: 24.5 mm thickness: 4.25 mm (📦 #5180)

1 object(s) - format STL
Pipe elbow STL 3D file 15° ⌀OD: 33 mm ⌀ID: 24.5 mm thickness: 4.25 mm
3D file of a pipe elbow with a 15° angle in STL format. This pipe elbow features an outer diameter of 33 mm and an inner diameter of 24.5 mm. The tube thickness is therefore 4.25 mm.
Parameter Value Unit
outer diameter 33 mm
inner diameter 24.5 mm
angle 15 °
end fillets no

Tube elbow STL 3D file 20° ⌀OD: 35 mm ⌀ID: 31 mm thickness: 2 mm (📦 #4925)

1 object(s) - format STL
Tube elbow STL 3D file 20° ⌀OD: 35 mm ⌀ID: 31 mm thickness: 2 mm
File of a pipe elbow with a 20° angle in STL format. This elbow has an outer diameter of 35 mm and an inner diameter of 31 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 35 mm
inner diameter 31 mm
angle 20 °
end fillets no

Pipe elbow STL file 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm (📦 #1836)

1 object(s) - format STL
Pipe elbow STL file 20° ⌀OD: 34 mm ⌀ID: 30 mm thickness: 2 mm
3D file of an elbow with a 20° angle in STL format. This pipe elbow features an external diameter of 34 mm and an internal diameter of 30 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 34 mm
inner diameter 30 mm
angle 20 °
end fillets no

Pipe elbow STL file 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm (📦 #1840)

1 object(s) - format STL
Pipe elbow STL file 20° ⌀OD: 38.5 mm ⌀ID: 30.5 mm thickness: 4 mm
3D file of an elbow with a 20° angle in STL format. This elbow has an external diameter of 38.5 mm and an internal diameter of 30.5 mm. The tube thickness is therefore 4 mm.
Parameter Value Unit
outer diameter 38.5 mm
inner diameter 30.5 mm
angle 20 °
end fillets no

Pipe elbow STL 3D file 1° ⌀OD: 16.5 mm ⌀ID: 15 mm thickness: 0.75 mm (📦 #4300)

1 object(s) - format STL
Pipe elbow STL 3D file 1° ⌀OD: 16.5 mm ⌀ID: 15 mm thickness: 0.75 mm
3D file of an elbow with a 1° angle in STL format. This elbow has an outer diameter of 16.5 mm and an inner diameter of 15 mm. The tube thickness is therefore 0.75 mm.
Parameter Value Unit
outer diameter 16.5 mm
inner diameter 15 mm
angle 1 °
end fillets no

Pipe elbow STL 3D file 23° ⌀OD: 33.2 mm ⌀ID: 26.8 mm thickness: 3.2 mm (📦 #2721)

1 object(s) - format STL
Pipe elbow STL 3D file 23° ⌀OD: 33.2 mm ⌀ID: 26.8 mm thickness: 3.2 mm
File of an elbow with a 23° angle in STL format. This pipe elbow features an external diameter of 33.2 mm and an internal diameter of 26.8 mm. The tube thickness is therefore 3.2 mm.
Parameter Value Unit
outer diameter 33.2 mm
inner diameter 26.8 mm
angle 23 °
end fillets no

Tubing elbow STL file 1° ⌀OD: 54 mm ⌀ID: 50 mm thickness: 2 mm (📦 #4262)

1 object(s) - format STL
Tubing elbow STL file 1° ⌀OD: 54 mm ⌀ID: 50 mm thickness: 2 mm
3D file of an elbow with a 1° angle in STL format. This pipe elbow has an external diameter of 54 mm and an internal diameter of 50 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 54 mm
inner diameter 50 mm
angle 1 °
end fillets no

Pipe elbow STL file 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm (📦 #1420)

1 object(s) - format STL
Pipe elbow STL file 25° ⌀OD: 40 mm ⌀ID: 34 mm thickness: 3 mm
3D model of an elbow with a 25° angle in STL format. This elbow has an external diameter of 40 mm and an internal diameter of 34 mm. The tube thickness is therefore 3 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 34 mm
angle 25 °
end fillets no

Tube elbow STL 3D file 1° ⌀OD: 55 mm ⌀ID: 51 mm thickness: 2 mm (📦 #4261)

1 object(s) - format STL
Tube elbow STL 3D file 1° ⌀OD: 55 mm ⌀ID: 51 mm thickness: 2 mm
3D model of a pipe elbow with a 1° angle in STL format. This pipe elbow features an external diameter of 55 mm and an internal diameter of 51 mm. The tube thickness is therefore 2 mm.
Parameter Value Unit
outer diameter 55 mm
inner diameter 51 mm
angle 1 °
end fillets no

Tube elbow STL 3D file 25° ⌀OD: 32 mm ⌀ID: 25 mm thickness: 3.5 mm (📦 #5082)

1 object(s) - format STL
Tube elbow STL 3D file 25° ⌀OD: 32 mm ⌀ID: 25 mm thickness: 3.5 mm
Model of a tubing elbow with a 25° angle in STL format. This elbow features an outer diameter of 32 mm and an inner diameter of 25 mm. This results in a tube thickness of 3.5 mm.
Parameter Value Unit
outer diameter 32 mm
inner diameter 25 mm
angle 25 °
end fillets no

Tube elbow STL file 15° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm (📦 #4454)

1 object(s) - format STL
Tube elbow STL file 15° ⌀OD: 18 mm ⌀ID: 15 mm thickness: 1.5 mm
3D model of an elbow with a 15° angle in STL format. This elbow has an outer diameter of 18 mm and an inner diameter of 15 mm. This results in a tube thickness of 1.5 mm.
Parameter Value Unit
outer diameter 18 mm
inner diameter 15 mm
angle 15 °
end fillets no

Pipe elbow STL file 25° ⌀OD: 22 mm ⌀ID: 18 mm thickness: 2 mm (📦 #4455)

1 object(s) - format STL
Pipe elbow STL file 25° ⌀OD: 22 mm ⌀ID: 18 mm thickness: 2 mm
3D model of a pipe elbow with a 25° angle in STL format. This elbow features an external diameter of 22 mm and an internal diameter of 18 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 22 mm
inner diameter 18 mm
angle 25 °
end fillets no

Tubing elbow STL 3D file 30° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm (📦 #7941)

1 object(s) - format STL
Tubing elbow STL 3D file 30° ⌀OD: 40 mm ⌀ID: 36 mm thickness: 2 mm
File of an elbow with a 30° angle in STL format. This pipe elbow has an outer diameter of 40 mm and an inner diameter of 36 mm. This results in a tube thickness of 2 mm.
Parameter Value Unit
outer diameter 40 mm
inner diameter 36 mm
angle 30 °
end fillets no